• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.729-732
• /
• 2006

The effect of stress match between silicon nitride ($SiN_2$) and hydrogenated amorphous silicon (a-Si:H) layers on the electrical characteristics of thin-film transistors (TFTs) has been investigated. The result shows that modifying the deposition conditions of a Si:H and $SiN_2$ thin films can reduce the stress mismatch at a-Si:H/SiNx interface. Moreover, for best a-Si:H TFT characteristics, the internal stress of gate $SiN_2$ layer with slightly nitrogen-rich should be matched with that of a-Si:H channel layer. The ON current, field-effect mobility, and stability of TFTs can be enhanced by controlling the stress match between a-Si:H and gate insulator. The improvement of these characteristics appears to be due to both the decrease of the interface state density between the a-Si:H and SiNx layer, and the good dielectric quality of the bottom nitride layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1640-1644
• /
• 2006

The first issue that should be overcome in copper process is its poor adhesive strength between pure copper film and glass substrate. In this study, defining the adhesive strength of pure copper film on various substrates and clarifying the key deposition parameters are presented for the investigation of copper process. First, using different kinds of surface plasma treatments were studied and the results showed that the adhesive strength was not improved even though the roughness of glass substrate surface was increased. Second, adding an adhesive layer between glass substrate and pure copper film was used to enhance the adhesion. Based on the data in the present paper, adopting copper alloy film as an adhesive layer can have capability preventing peeling problem in copper process. Besides, Cu/Cu alloy structure could be etched with the same etchant with better taper angle than the one with single layer of Cu. Unlike Cu/Mo structure, there is no residual problem for Cu/Cu alloy structure during etching process. Finally, this structure was examined in electrical test without significant difference in comparison with the conventional metal process.

• Tuberculosis and Respiratory Diseases
• /
• 제50권2호
• /
• pp.182-195
• /
• 2001

연구배경 : IPF에 의한 유병률과 사망률은 점차 증가하는 추세이나 좋은 치료는 없는 상태이다. 폐 섬유화 과정에서 TGF-${\beta}_1$, TNF-$\alpha$, ET-1, IFN-$\gamma$등의 사이토카인이 중요한 역할을 함이 알려져 있다. 본 실험은 파라콰트를 기관지 내로 주입하여 섬유화가 유발되는 과정의 백서의 폐 조직 내에서 ET-1과 TGF-${\beta}_1$의 발현을 살펴보고, 또한 비선택적 ET-1 receptor blocker인 Bosentan이 폐 섬유화의 치료에 효과가 있는지를 보고자 하였다. 방 법 : 웅성 7-8 주령의 백서 120 마리를 세 그룹으로 나누고 제 1그룹은 대조군으로 하여 기관지 내로 생리 식염수를 투여하였고, 제2그룹은 파라콰트를 투여하였으며, 제3그룹은 첫날 파라콰트를 투여한 후 매일 gastric gavage 방법으로 보센탄을 투여하였다. 파라콰트 혹은 생리식염수를 투여한 지 1, 3, 5, 7, 10, 14일째 각각 세 그룹의 일정 수를 희생하여 폐의 병리조직을 보고 면역세포화학염색으로 ET-1과 TGF-${\beta}_1$의 발현 율을 조사하여 분석하였다. 폐 섬유화의 정도는 H&E 염색과 Masson trichrome 염색을 하여 컴퓨터 영상분석을 시행하였고, 면역세포화학염색은 염색정도에 따라 반정량화하여 분석하였다. 결 과 : 파라콰트를 투여한 군이 대조군에 비해 콜라겐의 침착이 실험 3일째부터 현저히 증가하였고, ET-1과 TGF-${\beta}_1$의 발현이 주로 실험 초기에 증가하였다. 그러나 보센탄을 투여한 경우 콜라겐이 침착된 양에는 유의한 변화가 없었고 파라콰트군과 비교해서 ET-1과 TGF-${\beta}_1$의 발현에 뚜렷한 변화는 없었다. 결 론: 파라콰트를 투여한 경우 폐 섬유화가 증가하였다. 그리고 ET-1과 TGF-${\beta}_1$의 발현이 증가하였다. 그러나 ET-1 에 대한 receptor blocker인 보센탄이 폐 섬유화를 막지는 못하였다. 파라콰트에 의한 폐 섬유화에 ET-1이 연관성이 있으나 그 역할에 대해서는 추후 더 연구가 필요할 것으로 사료된다.

• Tuberculosis and Respiratory Diseases
• /
• 제46권6호
• /
• pp.775-785
• /
• 1999

목 적 : 폐섬유화증 연구의 동물 실험 모델로 paraquat 중독이 자주 이용되고 있다. 본 연구에서는 paraquat로 유발된 폐섬유화에서 폐섬유화의 정도에 따른 Et-1의 변화를 면역조직화학적으로 관찰하고 스테로이드나 cyclophosphamide의 치료에 따른 Et-1의 변화를 관찰하여 폐섬유화과정에 Et-1의 역할을 밝히고자 하였다. 대상 및 방법 : 수컷 Hartley 기니픽을 4군으로 나누어 실험하였다. I 군은 paraquat를 투여하지 않은 군이었고, II 군용 paraquat를 폐에 주입한 후 cyclophosphamide와 methylprednisolone을 투여한 군이었고 III 군은 paraquat를 폐에 주입한후 methylprednisolone만 투여하였고, IV 군은 paraquat만 투입하였다. I 군을 제외한 나머지 군에서는 PE50 polyethylene tube를 이용하여 paraquat를 우측 폐로 주입하였다. 섬유화의 정도는 H-E와 Masson's trichrome 염색을 통해서 섬유아세포의 침윤정도와 교원질의 침윤정도로 판단하였고, Endothelin-1 면역조직화학염색을 통해서 세포의 활성도를 평가하였다. 각 군의 평균값은 median 값으로 표시하였고, 각 군간의 비교는 Kruskal-Wallis oneway analysis로 시행하였다. 결 과 : 1. Paraquat에 의한 폐 섬유화 Cyclophosphamide나 methylprednisolone의 치료로 paraquat에 의한 섬유아세포의 증식이 억제되었으나 통계학적 의미는 없었다. 교원질의 침윤은 cyclophosphamide와 methylprednisolone을 병합한 경우 paraquat만 투여한 군보다 의미있게 감소하였다(p<0.05). 2. Endothelin-1에 대한 면역조직화학염색 Paraquat의 투여로 발생된 폐섬유화증에 대한 치료의 종류에 따른 Et-1의 발현은 methylprednisolone의 단독 투여로도 폐포의 대식세포를 제외한 기관지 상피세포, 제2형 폐포세포, 혈관 내피세포 및 섬유아세포 등에서 Et-1의 발현이 감소하는 경향을 보였으며, cyclophosphamide와 methylprednisolone을병합한 군에서는 모든 세포에서 의미있게 Et-1의 발현이 감소하였고, 특히 폐포 대식세포와 섬유아세포에서는 methylprednisolone의 단독 투여한 III 군보다 의미있게 감소하였다(Table 2, p<0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권1호
• /
• pp.10-18
• /
• 2014

The objective of this study was to investigate the correlation between cattle breeds and deposit of adipose tissues in different positions and the gene expressions of peroxisome proliferator-activated receptor gamma ($PPAR{\gamma}$), fatty acid synthase (FASN), and Acyl-CoA dehydrogenase (ACADM), which are associated with lipid metabolism and are valuable for understanding the physiology in fat depot and meat quality. Yanbian yellow cattle and Yan yellow cattle reared under the same conditions display different fat proportions in the carcass. To understand this difference, the expression of $PPAR{\gamma}$, FASN, and ACADM in different adipose tissues and longissimus dorsi muscle (LD) in these two breeds were analyzed using the Real-time quantitative polymerase chain reaction method (qRT-PCR). The result showed that $PPAR{\gamma}$ gene expression was significantly higher in adipose tissue than in LD in both breeds. $PPAR{\gamma}$ expression was also higher in abdominal fat, in perirenal fat than in the subcutaneous fat (p<0.05) in Yanbian yellow cattle, and was significantly higher in subcutaneous fat in Yan yellow cattle than that in Yanbian yellow cattle. On the other hand, FASN mRNA expression levels in subcutaneous fat and abdominal fat in Yan yellow cattle were significantly higher than that in Yanbian yellow cattle. Interestingly, ACADM gene shows greater fold changes in LD than in adipose tissues in Yan yellow cattle. Furthermore, the expressions of these three genes in lung, colon, kidney, liver and heart of Yanbian yellow cattle and Yan yellow cattle were also investigated. The results showed that the highest expression levels of $PPAR{\gamma}$ and FASN genes were detected in the lung in both breeds. The expression of ACADM gene in kidney and liver were higher than that in other organs in Yanbian yellow cattle, the comparison was not statistically significant in Yan yellow cattle.

• Safety and Health at Work
• /
• 제2권3호
• /
• pp.282-289
• /
• 2011

Objectives: We sought to establish a novel method to generate nano-sized carbon black particles (nano-CBPs) with an average size smaller than 100 nm for examining the inhalation exposure risks of experimental rats. We also tested the effect of nano-CBPs on the pulmonary and circulatory systems. Methods: We used chemical vapor deposition (CVD) without the addition of any additives to generate nano-CBPs with a particle size (electrical mobility diameter) of less than 100nm to examine the effects of inhalation exposure. Nano-CBPs were applied to a nose-only inhalation chamber system for studying the inhalation toxicity in rats. The effect on the lungs and circulatory system was determined according to the degree of inflammation as quantified by bronchoalveolar lavage fluid (BALF). The functional alteration of the hemostatic and vasomotor activities was measured by plasma coagulation, platelet activity, contraction and relaxation of blood vessels. Results: Nano-CBPs were generated in the range of 83.3-87.9 nm. Rats were exposed for 4 hour/day, 5 days/week for 4 weeks to $4.2{\times}10^6$, $6.2{\times}10^5$, and $1.3{\times}10^5$ particles/$cm^3$. Exposure of nano-CBPs by inhalation resulted in minimal pulmonary inflammation and did not appear to damage the lung tissue. In addition, there was no significant effect on blood functions, such as plasma coagulation and platelet aggregation, or on vasomotor function. Conclusion: We successfully generated nano-CBPs in the range of 83.3-87.9 nm at a maximum concentration of $4.2{\times}10^6$ particles/$cm^3$ in a nose-only inhalation chamber system. This reliable method can be useful to investigate the biological and toxicological effects of inhalation exposure to nano-CBPs on experimental rats.

• 대한핵의학회지
• /
• 제25권1호
• /
• pp.46-52
• /
• 1991

Radioaerosol inhalation imaging (RII) has been used in radionuclide pulmonary studies for the past 20 years. The method is well accepted for assessing regional ventilation because of its usefulness, easy fabrication and simple application system. To evaluate its clinical utility in the study of impaired regional ventilation in bronchial asthma, we obtained and analysed RIIs in 31 patients (16 women and 15 men; age ranging 21-76 years) with typical bronchial asthma at the Department of Radiology, Kangnam St. Mary's Hospital, Catholic University Medical college, from January, 1988 to August, 1989. Scintiscans were obtained with radioaerosol produced by a BARC(Bhabha Atomic Reserch Center, India) nebulizer with 15 mCi of $^{99m}Tc-phytate$. The scanning was peformed in anterior, posterior and lateral projections following 5-minute inhalation of radioaerosol on sitting position. The scans were analyzed and correlated with the results of pulmonary function study and the findings of chest radiography. Fifteen patients had concomitant lung perfusion image with $^{99m}Tc-MAA$. Follow-up scans were obtained in 5 patients after bronchodilator therapy. The patients were divided into (1) attack type (4 patients), (2) resistant type (5 patients), (3) remittent type (10 patients) and (4) bronchitic type (12 patients). Chest radiography showed hyperinflation, altered pulmonary vascularity, thickening of the bronchial wall and accentuation of basal interstitial markings in 26 of the 31 patients. Chest radiographs were norma! in the remaining 5 patients. Regardless of type, the findings of RII were basically the same, and characterized by the deposition of radioaerosol in the central parts or in the main respiratory air ways along with mottled nonsegmental ventilation defects in the periphery. Peripheral parenchymal defects were more extensive than that of expected findings from clinical symptoms, pulmonary function test and chest radiograph. Broomstick sign was present in 17 patients. The abnormality of RII was poorly correlated with perfusion scans. In all 5 patients treated with bronchodilators, follow-up study demonstrated a decrease in the degree of radioaerosol deposition in the central air way with improved ventilation defects. This study indicates that RII is a useful technique for the evaluation of regional ventilation abnormality and the effect of treatment with bronchodilators in patients with bronchial asthma.

• Asian-Australasian Journal of Animal Sciences
• /
• 제22권10호
• /
• pp.1420-1428
• /
• 2009

In this study we cloned and characterized a novel lipid-accumulating gene, the oxidized low-density lipoprotein receptor 1 (OLR1), which is associated with lipogenesis. We analyzed the gene structure and detected the mRNA transcriptional expression levels in pig adipose tissues at different months of age (MA) and in different economic types (lean type and obese type) using real-time fluorescence quantitative PCR. OLR1 expression profile in different tissues of pig was analyzed. Finally, we studied the correlation between OLR1 and lipid metabolism related genes including peroxisome proliferator-activated $receptor{\gamma}2$ ($PPAR{\gamma}2$), fatty acid synthetase (FAS), triacylglycerol hydrolase (TGH), CAAT/enhancer binding protein $\alpha$ ($C/EBP{\alpha}$) and sterol regulatory element binding protein-1c (SREBP-1c). Results indicated that the OLR1 gene of the pig exhibited the highest homology with the cattle (84%), and the lowest with the mouse (27%). The signal peptide located from amino acid 38 to 60 and the domain from amino acid 144 to 256 were shared by the C-type lectin family. The expression level of OLR1 in pig lung was exceedingly higher than other tested tissues (p<0.01). In pig adipose tissue, the expression level of OLR1 mRNA increased significantly with growth (p<0.01). The expression level of OLR1 mRNA in obese-type pigs was significantly higher than that of lean-type pigs of the same monthly age (p<0.05). In adipose tissue, the expression of OLR1 correlated with $PPAR{\gamma}2$, FAS and SREBP-1c, but not TGH or C/EBP${\alpha}$. In conclusion, OLR1 was highly associated with fat deposition and its transcription, as suggested by high correlations, was possibly regulated by $PPAR{\gamma}2$ and SREBP-1c.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권5호
• /
• pp.640-647
• /
• 2008

Breed differences in adult animals are determined during fetal development. If interventions are to be developed that influence growth of muscle and fat, it is important to know at which time during gestation breed differences appear and are fixed. The objective of this study was to characterize fetal development in cattle of different breeds. Pregnant cows of 4 cattle breeds with different growth impetus and muscularity were slaughtered under normal processing conditions and the fetuses were removed. German Angus, a typical beef cattle; Galloway, a smaller, environmentally resistant beef type; Holstein Friesian, a dairy type; and Belgian Blue, an extreme type for muscle growth were used. Fetuses of each breed were investigated at 3, 6, and 9 mo of gestation. Fetuses were weighed and dissected into carcass, organs, and muscles. Body fat weight was obtained using the Soxhlet extraction method. Fetal weight increased most rapidly in the third trimester of gestation mainly due to the accelerated muscle and fat deposition. The organ weight to body weight (BW) ratios decreased and the muscle and fat weight to BW ratios increased. At 3 mo of gestation, Galloway fetuses had the significantly smallest BW, half-carcass weight, leg weight, organ weight, muscle weight and shortest leg length. In contrast, Holstein fetuses had the significantly greatest BW, liver, kidney, and lung weights and significantly longest leg length among the 4 breeds, but no differences between Holstein Friesian and Belgian Blue were detected in half-carcass and leg weight. Indeed, Belgian Blue fetuses had the significantly greatest half-carcass weight, leg weight, and muscle weight at 9 mo of gestation, and Galloway had a significantly greater body fat to BW ratio than Holstein Friesian and Belgian Blue. These differences were not evident at 3 and 6 mo of gestation. These data show that the profound increase of tissue and organ weights occurred in later gestation in cattle fetuses even though breed differences were evident as early as 3 mo of gestation. Depending on the tissue of interest, impacting fetal growth likely needs to occur early in gestation before the appearance of breed-specific differences.

• 센서학회지
• /
• 제11권5호
• /
• pp.263-272
• /
• 2002

본 논문에서는 X선 컴퓨터 단층 촬영으로부터 획득된 기관지의 3차원 영상으로부터 기관지의 구조 및 형태 정보를 추출할 수 있는 가능성을 조사하고, 분진 침착 모델의 수학적인 개발과 실험적인 검증에 사용될 수 있는 물리적인 공동 주형 모델을 개발한다. CT로부터 획득된 영상으로부터 수학적 모폴로지 기법에 의하여 폐의 기관지 영역을 검출한다. 검출된 폐의 기관지 영역의 체적 데이터를 3차원 공간상에서 나타낼 수 있는 표면 데이터를 STL(streolithography) 파일로 변환한 후에, 고속 프로토타입 기기에 입력하여 3차원 입체 형상을 제작한다. 이때 기존의 기관지 팬텀과 실제 정상인으로부터 획득된 CT 영상으로부터 각각의 공동 주형 모델을 제작하게 된다. CT 스캔하여 얻어진 원래의 영상과 제작된 공동 주형 모델을 CT 스캔하여 얻어진 영상에서의 기관지 영역의 단면 직경을 비교하여 생성된 폐 기관지 모델의 유용성을 검증하였다.