• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.12
• /
• pp.592-600
• /
• 2001

This Paper presents the transient analysis of the single-phase line-start permanent magnet synchronous motor. To analyse the starting characteristics, the dynamic equation which is combined electric dynamic equations with mechanical dynamic equation is used. The electric dynamics are derived from the d-q axis voltages of stator and rotor respectively. Especially, symmetrical components transformation is used to consider unbalanced magnetic field which is produced by single-phase input. Non-linear d-q axis inductances according to current amplitude and current phase angle are calculated by Finite Element Method and applied to lumped parameter circuit. The analysis methods are validated by comparing simulated and experimental results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.486-487
• /
• 1997

This paper presents the pure capacitive lumped element equivalent circuits for several coplanar waveguide(CPW) discontinuities such as an open-end, an open-end with connected ground planes, a gap and an open-end CPW stub and gives their capacitive element values as a function of physical dimensions of the discontinuity and the frequency for a specific substrate. The capacitive element values are determined from the scattering parameters which are obtained using the finite-difference time-domain(FDTD) method. For an open-end, an open-end with connected ground planes and a gap, the numerical results of the FDTD are compared with the quasi-static results which are calculated using the three- dimensional finite difference method(3D-FDM).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.188-193
• /
• 2010

In this paper, SI(Signal Integrity) characteristic of the 4-layer PCB(Printed Circuit Boards) with a through-hole via was analyzed by impedance mismatching between the through-hole via and the transmission line, and deterioration of clock pulse response characteristic due to the P/G plane resonances which are generated between the power and the ground plane. The minimized impedance mismatching between the through-hole via and the transmission line for the improving of SI characteristic is confirmed by the TDR(Time Domain Reflector) simulation and lumped element modeling of the through-hole via. And the cancellation method of P/G plane resonances for improvement of the SI characteristic is represented by simulation result.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.159-164
• /
• 2005

Recently, it has demanded high-speed digital circuits as information increase. Therefore, electromagnetic characteristics of compact microwave circuit occurred importantly. And, the effect of the imperfect ground plane on the signal integrity and influence of coupling between two parallel lines for high-speed digital transmission line on the printed circuit board is investigated by FDTD simulations in 3-D electromagnetic analysis method. The results of FDTD simulation are compared with the ADS simulation in commercial software, analyzed lumped element of modeling and electromagnetic wave's radiation of slot as frequency. As a consequence, when the slot in the ground plane is under microstrip line, it has much effect on propagation of wave.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.205-215
• /
• 2015

Common mode (CM) conducted interference are predicted and compared with experiments in a motor drive system of Electric vehicles in this study. The prediction model considers each part as an equivalent circuit model which is represented by lumped parameters and proposes the parameter extraction method. For the modeling of the inverter, a concentrated and equivalent method is used to process synthetically the CM interference source and the stray capacitance. For the parameter extraction in the power line model, a computation method that combines analytical method and finite element method is used. The modeling of the motor is based on measured date of the impedance and vector fitting technique. It is shown that the parasitic currents and interference voltage in the system can be simulated in the different parts of the prediction model in the conducted frequency range (150 kHz-30 MHz). Experiments have successfully confirmed that the approach is effective.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1503-1510
• /
• 2017

In this paper, a thermal analysis of a high speed induction motor with a PWM voltage source was performed by considering harmonic loss components. The electromagnetic analysis of the high speed induction motor was conducted using the time-varying finite element method, and its thermal characteristics were carried out using the lump-circuit method. Harmonic losses from tests in the high frequency region were divided into core loss and conductor loss components using various ratios, in order to determine the loss distributions for the thermal analysis. The results from both the calculations and experiment were validated using a high speed induction motor prototype operating at 20,000rpm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.261-265
• /
• 1999

This paper has dealt with the design and analysis methods of the frequency characteristics for the power dividers which are extensively used in CATV and DBS systems. Therefore, the lumped-element circuits have been implemented based on the Wilkinson power divider and the characteristics of the circuits approximated to ideal transformer examined. Then the frequency characteristics are analysised by using even ㆍodd-mode method. Furthermore, in order to improve the characteristics, the optimum design method by adding compensating circuit has been proposed and it has been shown that the characteristics are improved remarkably.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.200-204
• /
• 2000

In this paper, we have dealt with the design and analysis methods of the frequency charateristics for the power dividers which are extensively used in CATV and DBS(Direct Broadcasting Satellite) systems. The lumped-element circuits have been implemented based on the Wilkinson power divider and the charateristics of the circuits approximated to ideal transformer examined. Then the frequency characteristics are analysised by using even - odd-mode method. Furthermore, in order to improve the charateristics, the optimum design method by adding compensating circuit has been Proposed and it has been shown that the charateristics are improved remarkably.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1022-1025
• /
• 2008

To the best of our knowledge, for the first time, we applied impedance spectroscopy to analysis on OLED degradation mechanism by monitoring impedance change during constant voltage aging, and modeling OLED with lumped circuit elements. Change in each element value was used to explain charge accumulation and field redistribution in each organic layer.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.125-126
• /
• 2015

통신 시스템에서의 더 늘어난 대역폭(Band Width)의 수요로 인해 집적회로(Integrated Circuit)에서 더 높은 동작 주파수(Operating Frequency)를 필요로 하게 되었다. 고주파 영역에서는 SRF(Self Resonance Frequency) 문제와 소자 값의 정확성(Accuracy)에 대한 문제 때문에 정수소자(Lumped Element)를 이용하여 해석을 할 수 없으며 이로 인하여 어떠한 회로의 전기적 특성을 평가함에 있어서 전송선로(Transmission Line)를 이용하여 해석을 하는 것은 중요한 역할을 하게 되었다. 이러한 해석을 위해 순수한 내부 특성을 얻기 위하여 디 임베딩(De-Embedding)이라는 기법이 사용되고 있으나, 알려진 몇 가지의 방법들은 인터커넥터 부분을 완벽히 나타내지 못한다. 따라서 본 논문에서는 1-Port 측정을 기반으로 한 8-Term Error을 이용한 디 임베딩(De-Embedding) 방법을 이용하여 넓은 주파수 영역에서의 교정 값을 얻는 방법에 대하여 소개하고자 한다.