• Journal of Photoscience
• /
• v.2 no.2
• /
• pp.83-87
• /
• 1995

Luminscence spectra and decay of crystalline hexahydro-1,3,5-trinitro-1,3,5-s-tetrazine (RDX) are observed at 90 K and the effects of photochemical reaction on the luminescence of RDX are investigated. The uv light from high power Hg lamp is used for the photochemical reaction of RDX. While no significant changes are observed in the luminescence spectra after the photochemical reaction, the intensity profile of the spectra changes with the progress of chemical reactions. The biexponential decay of luminescence is modified by chemical reactions. Features of the electronic states of crystalline RDX are discussed in relation to the luminescence.

• Journal of Radiation Protection and Research
• /
• v.41 no.3
• /
• pp.222-228
• /
• 2016

Background: We are developing a small size dosimeter for dose estimation in particle therapies. The developed dosimeter is an optical fiber based dosimeter mounting an radiation induced luminescence material, such as an OSL or a scintillator, at a tip. These materials generally suffer from the quenching effect under high LET particle irradiation. Materials and Methods: We fabricated two types of the small size dosimeters. They used an OSL material Eu:BaFBr and a BGO scintillator. Carbon ions were irradiated into the fabricated dosimeters at Heavy Ion Medical Accelerator in Chiba (HIMAC). The small size dosimeters were set behind the water equivalent acrylic phantom. Bragg peak was observed by changing the phantom thickness. An ion chamber was also placed near the small size dosimeters as a reference. Results and Discussion: Eu:BaFBr and BGO dosimeters showed a Bragg peak at the same thickness as the ion chamber. Under high LET particle irradiation, the response of the luminescence-based small size dosimeters deteriorated compared with that of the ion chamber due to the quenching effect. We confirmed the luminescence efficiency of Eu:BaFBr and BGO decrease with the LET. The reduction coefficient of luminescence efficiency was different between the BGO and the Eu:BaFBr. The LET can be determined from the luminescence ratio between Eu:BaFBr and BGO, and the dosimeter response can be corrected. Conclusion: We evaluated the LET dependence of the luminescence efficiency of the BGO and Eu:BaFBr as the quenching effect. We propose and discuss the correction of the quenching effect using the signal intensity ratio of the both materials. Although the correction precision is not sufficient, feasibility of the proposed correction method is proved through basic experiments.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.75-76
• /
• 2007

ZnS:Cu,Cl phosphor was coated by solid-gel reaction with $SiO_2$ outside layer. The effect of $Cu^{2+}$-doping concentration has been investigated on the luminescence characteristics of ZnS:Cu,Cl blue-green phosphors for inorganic electro luminescent device. Also, SiO2 coated layers' effect on luminescence characteristics. Evaluation of luminescence characteristics dependent on the synthesis conditions is important to get high-performance phosphors properties. EL and PL properties such as luminescence intensity and chromaticity of ZnS:Cu,Cl phosphors synthesized with different concentration of activator, $Cu^{2+}$, were analysed separately

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.112-113
• /
• 2007

ZnS:Cn,Cl phosphor was coated by solid-gel reaction with $SiO_2$ outside layer. The effect of $Cu^{2+}$ -doping concentration has been investigated on the luminescence characteristics of ZnS:Cn,Cl blue-green phosphors for inorganic electro luminescent device. Also, SiO2 coated layers' effect on luminescence characteristics. Evaluation of luminescence characteristics dependent on the synthesis conditions is important to get high-performance phosphors properties. EL and PL properties such as luminescence intensity and chromaticity of ZnS:Cn,Cl phosphors synthesized with different concentration of activator, $Cu^{2+}$, were analysed separately

• Journal of the Korean Society of Costume
• /
• v.63 no.4
• /
• pp.17-29
• /
• 2013

The purpose of this study is to analyze the factors of action and reaction through the examples of luminescence digital fashion design, which is a part of the interactive digital paradigm in 21st century, and to classify types of interaction expressed in luminescence digital fashion design. The significance of this study is to provide an effective database for researches on new ideas and expression methods of fashion design using luminescence digital device. The contents are as follows. First, identifying the concepts of interaction, digital fashion, and luminescence digital device. Second, analyzing the factors that put the luminescence digital device into effect through materials such as the collected photos and the stimulus behind the materials. Third, analyzing and classifying types of reaction according to the types of stimulus in luminescence digital fashion design. Detailed use of luminescence digital devices in Fashion designs did not start until after 2000 so the scope of this study starts from 2000 and on. The methods of this study are as follows. The theoretical frameworks of digital fashion and interaction were setup by using information from various related books, papers, and internet sites. In addition, the empirical analysis was performed using collected photos and explanations through related Internet sites of digital fashion. Through the study, the interaction types in 21st century's luminescence digital fashion design can be expressed variously according to the current input type, biometric recognition type, environment recognition type.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4145-4149
• /
• 2012

A novel and simple method of luminescence enhancement effect for the determination of trace amounts of bile acid was proposed. The procedure was based on the luminescence intensity of the balofloxacin-europium(III) complex that could be strongly enhanced by bile acid in the presence of sodium dodecyl benzene sulfonate (SDBS). Under the optimum conditions, the enhanced luminescence intensity of the system exhibited a good linear relationship with the bile acid concentration in the range $5.0{\times}10^{-9}-7.0{\times}10^{-7}\;mol\;L^{-1}$ with a detection limit of $1.3{\times}10^{-9}\;mol\;L^{-1}$ ($3{\sigma}$). The relative standard deviation (RSD) was 1.7% (n = 11) for $5.0{\times}10^{-8}\;mol\;L^{-1}$ bile acid. The applicability of the method to the determination of bile acid was demonstrated by investigating the effect of potential interferences and by analyzing human serum and urine samples. The possible enhancement mechanism of luminescence intensity in balofloxacin-europium(III)-bile acid-SDBS system was also discussed briefly.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1362-1366
• /
• 2016

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.386-393
• /
• 1998

A new analytical luminescence method for the $Dy^{3+}$ ion was studied using the luminescence enhancement by the treatment of the o-phenanthroline on the TLC plate. Compared to the specific emission intensities of the ion in water solution, if the ion solution is spotted on the TLC plate, the luminescence intensities were extremely enhanced. There was additional enhancement effect of the luminescence intensities of the ions on the TLC plate, if the ion on the TLC plate is treated with o-phenanthroline. Based on the luminescence enhancement, the detection limit was improved by more than 4 order of magnitude compared to that of solution sample. The dynamic ranges and correlation coefficients of the calibration curves near the detection limit were 102 order and ~0.99, respectively. The energy-transfer mechanism was explained for the theoretical back ground of the luminescence enhancement.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.165-169
• /
• 2007

Organic EL has been expected to adopt to a new styles of technology that make flat display after Tang & Vanslyke made food electric luminescence device in late 1980s. Their studies based on multi layer structure that consists of emitting layer and carrier transporting layer using proper organic material. In this study we made multi layer device using $Eu(TTA)_3(phen)$ as a luminescence material by PVD and investigate luminous properties of each device. But oxidization of organic layer by ITO, energy walls in both pole interface, contaminations of ITO surface, importance of protecting membrane, diffusive dimming of light to cathode organic layer, these causes of degradations are common facts of a macromolecule and micromolecule. We think these degradation caused by the impact of heat and electro-chemical factor, bulk effect and interface phenomenon, and raise a question.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.65-68
• /
• 2007

High brightness and long persistent luminescence phosphor $CaAl_2O_4:Eu^{2+}$ was prepared with varying $Eu^{2+}$ concentration by solid state reaction technique. Synthesized materials were investigated by powder X-ray diffractometer (XRD), SEM, TEM, photoluminescence excitation and emission spectra. Broad band UV excited luminescence of the $CaAl_2O_4:Eu^{2+}$ was observed in the blue region (${\lambda}_{max}\;=\;440\;nm$) due to transitions from the $4f^65d^1$ to the $4f^7$ configuration of the $Eu^{2+}$ ion. The decay time of the persistence indicated that the persistent luminescence phosphor has bright phosphorescence and maintains a long duration. These materials have great potential for outdoor night time displays.