• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.533-541
• /
• 2001

In this paper, we proposed lowpass filter using all-pass sums of flat delay characteristics. this filter consisted of all-pass filter of parallel structure, the general analog filter is impossible to adjust the phase and the delay, using the Proposed filter, it has advantage to adjust them. And, we compared and analyzed this filter with passband width and magnitude characteristics, and the relation of group delay characteristics and cut-off frequency. Also, in order to obtain desired cut-off frequency, forming the weighing, we obtained desired cut-off frequency and group delay characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.606-609
• /
• 2000

These results indicate that the low-Sequency signal of T/P data (with periods greater than 200 days) can be interpreted most safely. Similarly to the case of the T/P data, corrections were also applied to those of tide gauge counterparts. Hence, when the 200-day effect was filtered out, the agreement between T/P and TG data sets was optimized.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.594-596
• /
• 2006

In this thesis, we propose a algorithm that is able to detect a user's motion. A minute noise of accelerometer arises cumulative error in case of converting velocity and distance, which makes it difficult to detect movement of sensor. We use a lowpass filter, ALS algorithm, and motion detection block to minimize such cumulative error. we experiment using a motion-detective module which is composed of accelerometer, micro-controller, and serial interface. Our scheme is capable of detecting such as up, down, left, right, forward, and backward movement of the module. It is expected that our scheme is applied to a game controller or user interface of a next generation PC.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.12B
• /
• pp.2039-2045
• /
• 2000

본 논문에서는 계산이 간단한 두 가지의 GMSK (Gaussian minimum shift-keying) 변조기들을 제안한다. 제안된 방법들에서는 필터링과 적분과정의 순차적인 처리 대신에, 필터링되는 데이터 계열들에 따른 적분기 출력에서의 위상 성분들을 미리 구하고, ROM (read only memory)에 저장함으로써 계산량을 크게 줄일 수 있다. 첫 번째 방법에서는 필터링되는 심벌들에 따른 각 샘플시점에서의 위상 변화량들이 미리 계산되며, 위상 샘플 값은 필터에 입력되는 데이터 계열에 의한 샘플시점에서의 총 위상 변화량을 구하여 누적함으로써 얻어진다. 두 번째 방법에서는 입력되는 모든 가능한 데이터 계열들에 따른 모든 샘플시점에서의 총 위상 변화량들을 미리 구하여 ROM에 저장하며, 위상 샘플 값은 입력되는 데이터 계열에 따라 샘플시점에 해당하는 총 위상 변화량을 선택하여 누적함으로써 얻어진다. 또한, 두 번째 방법에서는 데이터 계열의 패턴에 따른 총 위상 변화량들의 대칭적인 성질을 이용함으로써 필요한 메모리량을 줄일 수 있다.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1215-1221
• /
• 1999

A high speed digital distance relaying algorithm based on a Wavelet Transformation is proposed. To obtain stable phasor values very quickly, first, a lowpass filter which has low cutoff frequency is used. Secondly, db2(Daubechies 2) Wavelet which has the data window of 4 samples is used. A FIR filter which removes the DC-offset component in current relaying signals is applied. In accordance with a series of tests, the operation time of the relaying algorithm is less than 3/4 cycles after faults in a 80 [km], 154[kV], 60[Hz] over-head transmission line system.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.348-351
• /
• 2001

In this paper, the Gm-C filter for low voltage and low power applications using a fully-differential transconductor is presented. The designed transconductor using the series composite transistors and the low voltage composite transistors has wide input range at low supply voltage. A negative resistor load (NRL) technology for high DC gain of the transconductor is employed with a common mode feedback(CMFB). As a design example, the third-order Elliptic lowpass filter is designed. The designed filter is simulated and examined by HSPICE using TSMC $0.35{\mu}m$ CMOS n-well parameters. The simulation results show 138kHz cutoff frequency and 11.05mW power dissipation with a 3.3V supply voltage.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.6-8
• /
• 2009

In this paper. we propose receiver algorithms for VHF(Very High Frequency) digital link mode-2(VDL Mode-2) systems. Unlike conventional digital communication systems using the root raised cosine filter as a transmit and receive filter, raised cosine filter is used as a transmit filter in VDL Mode-2 systems. Hence, it is crucial to design and implement the optimum lowpass receive filter by considering the amount of inter-symbol interference and noise performance. On the other hand, due to the short preamble pattern, it is crucial to develop an efficient packet detection algorithm for reliable communication link. In this paper, we design the optimum receive filter and packet detection algorithm and evaluate the performance of receiver adopting the proposed receive filter and packet detection algorithm.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.257-260
• /
• 2000

In this paper, a Gm-C filter for low voltage and low power applications using a fully-differential transconductor is presented. The designed transconductor using the series composite transistors and the low voltage composite transistors has wide input range at low supply voltage. A negative resistor load (NRL) technology for high DC gain of the transconductor is employed with a common mode feedback (CMFB). As a design example, the third-order Elliptic lowpass filter is designed. The designed filter is simulated and examined by HSPICE using 0.25${\mu}{\textrm}{m}$ CMOS n-well parameters. The simulation results show 105MHz cutoff frequency and 2.4㎽ power dissipation with a 2.5V supply voltage.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.1
• /
• pp.65-68
• /
• 2004

The performances of millimeter wave Power amplifier have been improved by using PBG (photonic bandgap structure) in this paper. The PBG structure has been optimized to obtain the lowpass characteristics in Ka band and employed at output port of Ka band power amplifier. The harmonics of the power amplifier have been suppressed by the PBG of output port and the proposed PBG has suppressed the second harmonic to 40dBc around 50 GHz. The improvements of IMD and PAE of the amplifier employing the PBG structure are obtained $15\%$ and $25\%$, compared with those of the conventional Ka band power amplifier, respectively.

• ETRI Journal
• /
• v.29 no.4
• /
• pp.470-476
• /
• 2007

In this paper, a versatile three-input five-output universal capacitor-grounded voltage-mode filter is proposed. The circuit employs two differential voltage current conveyors as active elements together with two grounded capacitors and four resistors as passive elements. The proposed configuration can be used as either a single-input five-output or three-input two-output. Unlike the previously reported works, it can simultaneously realize five different generic filtering signals: lowpass, bandpass, highpass, bandreject, and allpass. It still maintains the following advantages: (i) the employment of all grounded capacitors, (ii) no need to employ inverting-type input signals, (iii) no need to impose component choice, (iv) orthogonal control of the resonance angular frequency ${\omega}_o$ and the quality factor Q, and (v) low active and passive sensitivity performances.