• 한국작물학회지
• /
• 제37권1호
• /
• pp.28-36
• /
• 1992

쌀알의 알칼리붕괴도와 호화온도 및 수분흡수율간의 관계를 밝히기 위하여 50품종의 쌀을 이용하여 4농도의 알칼리용액에서 쌀알의 붕괴반응을 조사하였으며 알칼리붕괴반응에 근거하여 선발한 24품종에 대하여는 알칼리용액에서의 침지시간에 따른 쌀알의 붕괴정도, 가열온도 및 시간에 따른 쌀알의 완전호화율 그리고 21$^{\circ}C$ 및 77$^{\circ}C$의 물에 쌀을 침지했을 때의 흡수율 등을 조사하였다. 1. 자포니카형 및 통일형품종들의 알칼리붕괴도의 차이는 KOH 1.2%농도에서 가장 확실히 나타났지만 각 품종의 알칼리붕괴반응을 정확히 알기위해서는 KOH 1.2% 및 1.4%에서 쌀알의 붕괴도를 검정하는 것이 좋았다. 2. 4개수준의 알칼리농도에서 조사한 붕괴도에 근거하여 공시품종을 3품종군으로 나눌 수 있었는데 알칼리용액에 쌀알을 침지한 후 경과시간에 따른 붕괴반응에도 품종간 차이가 있었다. 3. 알칼리 붕괴반응이 크게 다른 품종군간에는 가열온도 및 시간에 따른 호화립비율의 차이가 분명하여 알칼리붕괴도가 낮은 품종의 쌀이 높은 쌀에 비하여 완전호화에 필요한 온도가 높았고 호화소요시간도 길었으나 동일한 품종군내에서도 품종간 차이가 있었다. 4. 알칼리붕괴도가 아주 낮았던 품종군의 쌀은 알칼리붕괴도가 중간 또는 높은 품종군에 비하여 상온(21$^{\circ}C$) 및 가열(77$^{\circ}C$)흡수율이 아주 낮았고 알칼리붕괴도가 중간인 품종군은 높은 품종군에 비하여 상온에서의 초기 수분흡수속도가 느렸다.

• Journal of Biosystems Engineering
• /
• 제41권4호
• /
• pp.328-336
• /
• 2016

Purpose: The heat culture areas of greenhouses have been continuously increasing. In the face of international oil price fluctuations, development of energy saving technologies is becoming essential. To save energy, auxiliary heat source and thermal insulation technologies are being developed, but they lack cost-efficiency. The present study was conducted to save energy by developing a conceptually new semi-basement type greenhouse. Methods: A semi-basement type greenhouse, was designed and constructed in the form of a three quarter greenhouse as a basic structure, which is an advantageous structure to inflow sunlight. To evaluate the performance of the developed greenhouse, a similar structured general greenhouse was installed as a control plot, and heating tests were conducted under the same crop growth conditions. Results: Although shadows appeared during the winter in the semi-basement type greenhouse due to the underground drop, the results of crop growth tests indicated that there were no differences in crop growth and development between the semi-basement type greenhouse and the control greenhouse, indicating that the shadows did not affect the crop up to the height of the crop growing point. The amount of fuel used for heating from January to March was almost the same between the two greenhouses for tests. The heating load coefficients of the experimental greenhouses were calculated as $3.1kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the semi-basement type greenhouse and $2.9kcal/m^2{\cdot}^{\circ}C{\cdot}h$ for the control greenhouse. Since the value is lower than the double layer PE (polyethylene) film greenhouse value of $3.5kcal/m^2{\cdot}^{\circ}C{\cdot}h$ from a previous study, Tthe semi-basement type greenhouse seemed to have energy saving effects. Conclusions: The semi-basement type greenhouse could be operated with the same fuel consumption as general greenhouses, even though its underground portion resulted in a larger volume, indicating positive effects on energy saving and space utilization. It was identified that the heat losses could be reduced by installing a thermal curtain of multi-layered materials for heat insulation inside the greenhouse for the cultivation of horticultural products by installing thermal curtain of multi-layered materials for heat insulation inside the greenhouse, it was identified that the heat losses could be reduced.

• 자원리싸이클링
• /
• 제18권6호
• /
• pp.54-59
• /
• 2009

RDF 생산 기술은 국내 실정에 맞는 제조 설비로 자체 생산할 수 있는 단계이지만, 사업장 가연성 폐기물에 대한 연료화 설비가 구축된 사례는 드물다. 본 연구에서는 사업장 가연성 폐기물을 대상으로 한 RPF(Refuse Plastic Fuel) 제조 공정의 고형연료 제조 가능성에 대해 검토하였다. 고형연료는 폐합성수지, 폐지 및 폐목재의 지역별 폐기물 발생비율 기준으로 제조되었으며, 제조된 RPF의 물리적 특성을 조사하였다. 대경(대구, 경북)지역을 기준으로 제조된 RPF의 발열량이 가장 높게 나타났으며, 폐지와 폐목재의 첨가량이 늘어날수록 발열량은 감소하였다.

• 대한기계학회논문집B
• /
• 제35권7호
• /
• pp.693-699
• /
• 2011

바이오매스나 기타 유기성 폐기물로부터 가스화공정을 거쳐 얻을 수 있는 합성가스는 환경보호와 화석연료고갈 방지 측면에서 유망한 대체연료 중 하나로 여겨지고 있다. 그러나 가스화로부터 얻어지는 합성가스는 일반적인 천연가스와 같은 가스연료에 비해 발열량이 낮고 연료조성이 불균일하여 내연기관에 적용시 안정적이고 지속적인 운전이 어렵다는 단점이 있다. 따라서 본 연구에서는 이러한 저발열량과 불균일한 가스 조성의 특징을 가진 합성가스가 연소에 미치는 영향을 파악하여 고효율의 엔진을 개발하고자 연구를 수행하였다. 저발열량의 합성가스를 모사하기 위하여 천연가스에 질소를 희석한 연료를 사용하였다. 또한 체적당 발열량을 유지하면서 동일유량조건으로 합성가스에 수소 혼합비율을 10 ~ 30%로 변화시키면서 연소 특성 변화를 살펴보았다.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.465-469
• /
• 2013

본 연구는 반탄화된 OPF(oil palm fronds)의 연료로써 이용가능성을 알아보았다. OPF는 200, 250, 300, $350^{\circ}C$에서 각각 1시간과 2시간 동안 반탄화를 진행하였다. 반탄화된 OPF는 온도가 높아짐에 따라 그리고 반탄화 시간이 증가됨에 따라 발열량이 증가하였다. 또한, 반탄화 시간보다는 반탄화 온도가 더 중요한 요소였다. 하지만 반탄화 온도가 높아질수록 반탄의 수득률이 감소함으로 적절한 반탄화 온도가 요구되었다. $250^{\circ}C$에서의 반탄화로는 헤미셀룰로오스의 분해가 상당히 진행되고 $300^{\circ}C$에서는 셀룰로오스의 분해까지도 거의 진행됨을 OPF의 열분해 거동으로부터 알 수 있었다. 또한, 반탄화된 OPF는 바이오매스의 grindability를 향상시킴으로 분쇄에 소모되는 에너지를 감소시킴을 예측할 수 있었다.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.770-776
• /
• 2018

This study measured the energy recovery rate of each municipal waste incineration facility according to the revised energy recovery rate estimation method, which targeted four municipal waste incineration facilities (Unit No. 7). The results calculated by the measuring instruments were used for each factor to estimate the recovery rate, and the available potential of available energy was examined by analyzing the energy production and valid consumption. As a result of the low heating value, 2,540 kcal/kg was calculated on average when the LHVw formula was applied, which is approximately 116 kcal/kg higher than the average design standard of 2,424 kcal/kg. The energy recovery rate was calculated as 96.9% on average based on production and 67.5% based on effective consumption, and the analysis shows that approximately 29.4% energy can be used.

• 한국식품조리과학회지
• /
• 제29권5호
• /
• pp.525-531
• /
• 2013

Nutritional components and quality characteristics of drained soybean boiling water(DBW), which is discarded in the mass production of fermented soy foods, were compared with raw soybean(Control) and Cheonggukjang(CGJ) to provide the basic data for its recycle. The contents of moisture, crude protein, crude lipid and crude ash of DBW were shown as 87%, 2.2%, 0.15% and 1.42%, respectively. Decreased total amino acid of 1,677.8 mg/100g in DBW was comparable with 29,051.1 mg/100g in control, however, there was no great difference in the proportion of essential amino acid to the total. While the total sugar contents were decreased in both DBW and CGJ with 8.39% and 7.17% each from the control of 11.50%, the reducing sugars were increased with higher amount of 6.44% in CGJ and 8.30% in DBW than 5.60% in control. pH of DBW was lower than both of the control and CGJ. Hunter's color values revealed the increase of redness(a value) and yellowness(b value) of DBW and CGJ suggesting that Maillard reaction products were produced by the heating and fermentation process. Polyphenol compounds were highly abundant in CGJ of 0.74 tannic acid equivalent(mg/g) followed by similar low amounts of 0.33 and 0.29 tannic acid equivalent(mg/g) in DBW and control, respectively. Antioxidative activity determined by Electron Donating Ability(%) using DPPH radical showed that CGJ, of which polyphenols were the highest, has the strongest electron donating ability with the lowest $EC_{50}$ value of 5.91 mg/mL. DBW was much lower but similar with the control. From the above results the drained soybean boiling water was shown to have many nutritional and functional components as much as soybean, therefore, it could be a potent reusable food material.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.90-95
• /
• 2008

An SHGC(Solar Heat Gain Coefficient) is a determinant of total flux of solar radiation coming indoor and a critical factor in evaluating heating and cooling load. U-value represents heat loss while SHGC denominates heat gain. Recently, windows with high solar gain, mid solar gain or low solar gain are being produced with the development of Low-E coating technology. This study evaluated changes in energy consumption for heating and cooling according to changes in SHGC when using double-layered Low-E glass and triple layered Low-E glass in relation to double layered clear glass as base glass. An Office was chosen for the evaluation. For deriving optical properties of each window, WINDOW 5 by LBNL, an U.S. based company. and the results were analyzed to evaluate performance of heat and cooling energy on anannual basis using ESP-r, an energy interpretation program. Compared to the energy consumption of the double layered clear glass, the double layered Low-E glass with high solar gain consumed $69.5kWh/m^2,yr$, 9% more than the double layered clear glass in cooling energy. The one with mid solar gain consumed $63.1kWh/m^2,yr$, 1% less than the base glass while the one with low solar gain consumed $57.6kWh/m^2,yr$, 10% less than the base glass. When it comes to tripled layered glass, the ones with high solar showed 2% of increase respectively while the one with mid solar gain and low solar gain resulted 5% and 11% in decrease in energy consumption due to low acquisition of solar radiation. With respect to cooling energy. it was found that the lower the SHGC. the less energy consumption becomes.

• 자원리싸이클링
• /
• 제16권6호
• /
• pp.46-51
• /
• 2007

본 연구는 에너지의 합리적 이용 및 산업폐기물의 재활용을 위하여 고효율 폐기물 고형연료의 개발을 목표로 하였다. 이 분야의 대부분의 연구는 킬른과 같은 대형연소장치에 집중하여 연구가 이루어졌기 때문에 본 연구에서는 화격자연소방식인 열용량 $66{\sim}132m^2$ 규모의 소용량 열시스템에 초점을 맞추었다. 실험은 RDF, 코크스 및 폐타이어 3종류의 연료를 이용하여 질량값 및 열량값의 변화를 측정하였으며 CO, $CO_2$, NO, $NO_2$ 등의 연소가스 분석 실험을 수행하였다. 연소가스분석결과 RDF의 CO 농도값은 코크스와 폐타이어보다 높았으며. RDF 및 코크스의 NO, $CO_2$, $SO_2$의 농도값은 폐타이어보다는 낮은 값을 나타내었다.

• 한국군사과학기술학회지
• /
• 제17권4호
• /
• pp.463-470
• /
• 2014

Stealth technology of combat aircraft is most significant capability in recent air battlefield. As the detector of IR missiles is being developed, IR stealth capability which is evaluated by IR signature level become more important than it was in previous generation. Among IR signature of aircraft from various sources, aerodynamic heating dominates in long-wavelength IR spectrum of $8{\sim}12{\mu}m$. Skin temperature change by aerodynamic heating which is derived by effects of Mach number and structure. The 4th and 5th generation aircraft are selected for calculation of the skin temperature, and its height and velocity in numerical conditions are 10,000 m and Ma 0.9~1.9 respectively. Aircraft skin temperature is calculated by computing convection of fluid and conduction, convection and radiation of surface. As the aircraft accelerates to higher Mach number, maximum skin temperature increases more rapidly than average temperature and temperature distribution changes in more sharp, interactive ways. The 4th generation aircraft whose shape is more complex than that of the 5th generation aircraft have complicated temperature distribution. On the other hand, the 5th generation aircraft whose shape is relatively simple shows plain temperature distribution and lower skin temperature in terms of both average and maximum value.