• 복식문화연구
• /
• 제13권1호
• /
• pp.6-17
• /
• 2005

The purpose of this research is to define low body shapes of Plus-sized women at ages between 21 and 69 whose satisfied the Plus-sized judgment criteria took part in this study. This research also classifies different body types, and provides basic data for designing skirt's and slacks' prototypes according to each body type. Based on factor analysis of the measured data, seven key factors are grouped. And four different body types are classified based on the cluster analysis using factor marks. Type 1 refers to those who are tall in stature and balanced. This body type is characterized by trapezoid body shape when looked from the front, and slim the abdomen, bulge the belly and flat the buttocks when looked from the side. Type 2 refers to short and an obese body shapes, with trapezoid front and bulge abdomen and belly and flat the buttocks. Type 3 refers to those who are of medium height and long-legged body shapes, with rectangular front, protruding belly and buttocks. Type 4 refers to obese body shapes, with rectangular front, protruding abdomen and belly, flat the buttocks. 9 items are available to judge Plus-sized women's low body types and the hit ratio is 93.5%.

• 한국의류학회지
• /
• 제28권3_4호
• /
• pp.499-508
• /
• 2004

The purpose of this research is to define body characteristics of middle-aged men at ages between 35 and 55 whose physical changes are very prominent, by comparing the measurement data collected from this age group. This research also classifies different body types, and provides basic data for designing slacks' original forms according to each body type. Based on factor analysis of the measured data, seven key factors are grouped. And five different body types are classified based on the cluster analysis using factor marks. Type 1 refers to those who are tall and standard. This body type is characterized by trapezoid body shape when looked from the front, and slim abdomen when looked from the side. Type 2 refers to short and a little fat body shapes, with trapezoid front and protruding hip and abdomen. Type 3 refers to tall and fat body shapes, with rectangular front, protruding abdomen, and slim hip. Type 4 refers to those who are of medium height and a little obese, with rectangular front and protruding abdomen and hip. Type 5 refers to short and obese body shapes, with rectangular front, slim abdomen, and protruding hip. 12 items are available to judge middle-aged men's low body types and the hit ratio is 90%.

• Korean Journal of Acupuncture
• /
• 제18권1호
• /
• pp.27-63
• /
• 2001

The phrase 'Gyeong Su' in the twelve gyeong su(經水) indicate twelve lower reaches of rivers and lakes which are located in the center of China. The reason of this chapter called 'twelve gyeong su(經水)' is that the ki(氣) circulation through twelve meridians in the human body is similar to constant flow of twelve lower reaches of rivers and lakes. This chapter is divided into five sub chapters, according to its contents as follows, Chapter 1 deals with the correlation between twelve gyeong su and twelve meridians, Chapter 2 deals with the correlation between universe and human body, Chapter 3 deals with the definite example of the correlation between human body and universe and Um-Yang(陰陽), Chapter 4 deals with most proper acupuncturing depth and remain time of acupuncture according to the theory of man, as a microcosm, is connected with the macrocosm(天人相應) and more or less of moxibustion amount, Chapter 5 deals with acupuncture application according to height, age, body shape of patients.

• 한국의류학회지
• /
• 제45권6호
• /
• pp.965-977
• /
• 2021

The study aimed to analyze the functional differences in 3D virtual garment programs and compare body scan data with the corresponding 3D virtual models. We selected 3D virtual garment programs, formed virtual models in a representative size for high-school male cyclists, and analyzed them using the Design-X program. The results were as follows. In the 3D virtual garment programs, the anthropometric items for virtual model forming differed significantly from the standard anthropometric items suggested by Size Korea. Comparing the lower body scan data and virtual models formed by the 3D virtual garment programs, the biggest difference was in the shapes of the waist and hips, i.e., the flatness values of the waist and hips were different for each program in the cross-section view. In the lower body, a data-input-based program was needed for changing the exact measurement position of the waist circumference and hips' shape in detail. If a 3D virtual garment program provides functions for the virtual model's joint angle input and free motion transformation, it is expected to be widely used in the sportswear industry.

• 한국의류산업학회지
• /
• 제16권4호
• /
• pp.625-634
• /
• 2014

This study develops a sizing system of mass-customized male suits for wheelchair users. One hundred and three male wheelchair users' 21 anthropometric dimensions were measured to identify body shapes and develop a sizing system. The measured wheelchair users' body sizes were compared with the average body sizes of Korean males from the $6^{th}$ Korean Body Size Survey to understand the body size differences between two groups. As a result of body shape classification using the KS's Drop method, wheelchair user body shapes were classified into four shapes for upper-body (A: 32%, B: 26%, BB: 24%, and Y: 18%), and two shapes for lower-body (B: 70% and A: 30%). The upper-body of wheelchair users was relatively developed than Korean males; however, the lower-body was relatively stunted. The key dimensions of a sizing system were selected as chest circumference, waist circumference, and trunk length, outside leg length based on the correlation analysis between anthropometric measures. The top sizes were determined considering chest and waist circumferences for horizontal sizes, and additionally the trunk length was divided into short, medium, and long groups for vertical sizes. The bottom sizes were selected considering the waist and hip circumferences for horizontal sizes, and additionally their outside leg length was divided into short, medium, and long groups for vertical sizes.

• 한국운동역학회지
• /
• 제26권2호
• /
• pp.161-166
• /
• 2016

Objective: The purpose of this study was to determine the knee and ankle joint kinematics and kinetics by comparing downhill walking with valley-shape combined slope walking. Method: Eighteen healthy men participated in this study. A three-dimensional motion capture system equipped with eight infrared cameras and a synchronized force plate, which was embedded in the sloped walkway, was used. Obtained kinematic and kinetic parameters were compared using paired two-tailed Student's t-tests at a significance level of 0.05. Results: The knee flexion angle after the mid-stance phase, the mean peak knee flexion angle in the early swing phase, and the ankle mean peak dorsiflexion angle were greater during downhill walking compared with valley-shape combined slope walking (p < 0.001). Both the mean peak vertical ground reaction force (GRF) in the early stance phase and late stance phase during downhill walking were smaller than those values during valley-shape combined slope walking. (p = 0.007 and p < 0.001, respectively). The mean peak anterior GRF, appearing right after toe-off during downhill walking, was also smaller than that of valley-shape combined slope walking (p = 0.002). The mean peak knee extension moment and ankle plantar flexion moment in late stance phase during downhill walking were significantly smaller than those of valley-shape combined slope walking (p = 0.002 and p = 0.015, respectively). Conclusion: These results suggest that gait strategy was modified during valley-shape combined slope walking when compared with continuous downhill walking in order to gain the propulsion for lifting the body up the incline for foot clearance.

• 한국가정과교육학회지
• /
• 제10권1호
• /
• pp.17-27
• /
• 1998

The purpose of this study was to investigate the recognition of body shape, the difference between self-evaluated obesity and obesity index of RBW, and attitude toward weight control of middle students. The questionnaires were completed by 195 male and 189 female students of liveing in Yongwol county. The average stature of the boys is 166.97$\pm$6.21cm, the girls is 158.13$\pm$5.83cm, and the average weight of the boys is 57.97$\pm$12.39kg, the girls is 52.88$\pm$8.35kg. 2. In the present body structure of them, the underweight structure is 6.0%, the normal weight structure is 87.2%, and the overweight structure is 6.7%. In the recognition of their own body structures, there are meaningful differences between boys and girls. 3. In the contentment degree of the present body structure of their own, the underweiht structure is much more satisfied with it.(p〈0.001) It shows a meaningful difference between boys and girls. 25.6% boys are satisfied with their own body structures, and 7.4% girls are satisfied with it.(p〈0.001) 4. In the interest degree about the weight's control, 87.1% is interested in it, it is lower in the underweight structure. 88.0% girls and 77.4% boys are interested in the weight's control. There is a meaningful difference between boys and girls, too.(p〈0.001) Each of the weight groups has differences in a experienced or experiencing for the weight's control. 5. The recognition degree of the present body structure showed the meaningful positive relation to the contentment degree of the present body structure and the weight's control.(p〈0.001)

• 소음진동
• /
• 제7권2호
• /
• pp.261-272
• /
• 1997

Recently washing machines are to be in lower vibration and lower sound because of better environment. Vibration problems in washing machines occur in both washing mode and spinning mode, but vibration in spinning mode becomes main problem because of its high rotating speed and continuity. Vibration while spinning is mainly due to rigid body motion of total washing system which includes suspending rods, washing bath, spinning bath, and gear sets. In this study, some researches were done in order to analyze the rigid body motion of washing system and flexible vibration of spinning bath. A basic mathematical model was established, and the effect of position of salt water and shape change of salt water case were considered. And the effect of lengths of suspending rods, attaching angles, vertical and horizontal position, stiffness of spring on the change of vibration were also considered. To identify the effect of salt water on vibration, some measurements were done. When salt water was positioned at upper part, the effect was most and this coincides with the tendency of simulation.

• 복식문화연구
• /
• 제7권1호
• /
• pp.154-164
• /
• 1999

The purpose of this study is to provide total information for elderly women\`s clothing construction by classifying and analyzing the characteristics of their lower body types. Three hundred three subjects, between the ages of 60 and 82, were chosen. The data were collected from 37 anthropometric measurements of each subject and analyzed by the multivariate method. Through the factor analysis of principal component model, eight factors were extracted from anthropometric measurements. The most important factors were obesity, vertical size, and shape of below waistline to hip. The subjects were classified into 5 types according to cluster analysis by Ward\`s minimum variance method. The dominent types were type 1, 2. The chracteristics of type 1 are average height and sized tyoes, a greater difference between hip and waist. The charateristics of type 2 are shorter height and comparatively fat types, fatness of the waist and abdomen.

• 한국생활과학회지
• /
• 제13권6호
• /
• pp.1023-1029
• /
• 2004

In the current study, we measured the hands and other representative body items of 223 elementary school girls using Martin Anthropometer and a digital camera so that we would be able to provide information on both size and shape of hands for design of hand-related products. As time goes on, hands get bigger, yet they get thinner at the same time. The data implies that the frame of hands grows, but the skin fat lessens, which could be a determinant factor in the size system of hand-related products. According to the results of a factor analysis on 26 hand items, 5 factors including hand laterality and linearity, fingertip shape, finger breadth, and hand depth, have been extracted. Pearson's correlation showed that most of hand-related factors were strongly associated with other body items. Finger breadth and hand depth, however, were found less related to other body items. The ANOVA test used in testing the difference of hand factors showed, in most items, a difference by ages, but there was no significant differences in fingertip breadth, the third factor, Interestingly, in hand depth, the fifth factor, lower grade girls' hands were thicker than higher grade girls'. This research suggests that the size system of uniformly increasing the size of all hand parts by age groups should be reconsidered and leaves much for improvement.