• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.151-157
• /
• 2022

The transition to renewable energy, especially the expansion of photovoltaic (PV) generation, has become a global megatrend that can no longer be reserved. However, since the site for PV is limited, it is necessary to use the land efficiently. As an alternative, the concept of utility scale agricultural PV(UAPV) is a technology that continues farming in the lower part and installs PV in the upper part of farmland to efficiently use the land. Therefore, for UAPV, the growth of crops in the lower part and the optimal operation of PV in the upper part are important. In this, we analyze the characteristics of the upper PV generation system in the UAPV based on the empirical results under various conditions, and propose future research directions of the UAPV.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.5 no.1
• /
• pp.135-139
• /
• 2004

Objectives : The objectives of this report is to introduce PTA. Methods : The examination of the leg length inequality gives us a useful tool for diagnosis of body imbalance. especially pelvic distortion. There are four steps in the process of the leg analysis, according to "The Standard Manual of Chuna Society (2nd ed., Seoul:KCA Press. 2001)". In the last step of the analysis, knee-flexing over $90^{\circ}$, we have often experienced a specific sign that the lower legs are attracted toward one side spontaneously. The authors call it 'Lower Leg Lateral Attraction'. This is a very significant sign that gives us which is the major part between pelvis and the upper parts over sacrum. Thus it is definded as "Pelvic Twist Analysis, PTA" by the authors. With PTA, first, you must check the side of short leg and next, check the side of lateral attraction in lower leg over-flexing. If both sides coincide with each other, then the major part you can correct first is pelvic distortion. If not, you must find another part for primary correction, instead of pelvis. Conclusions : PTA becomes a useful complement to the examination of the leg length inequality.

• Korean Journal of Environment and Ecology
• /
• v.16 no.4
• /
• pp.457-464
• /
• 2003

A valley forest in Sangbuun area at Jirisan National Park was studied to investigate forest structure in relation to altitude and part of the slope. Forty-eight quadrats were set up in the valley forest along altitude of 726m to 1,090m and part of the slope, and vegetation analysis for the woody species in the tree and subtree layers were carried out. With increasing elevation belt, mean DBH, height and basal area of the trees in the tree layer increased while their density decreased. This trends may be caused by the disturbance which was relatively severe in the low elevation area. As elevation increased, the importance percentages of Fraxinus rhynchophylla, Quercus variabilis and Quercus mongolica increased while those of Styyax japonicus, Carpinus laxiflora and Pinus densiflora decreased. The importance percentages of Quercus variabilis and Pinus densiflora increased as going from lower part to upper part of the slope. However, the opposite trend was found for the importance percentages of Acer mono and Corlus heterophylla var. thunbergii. Number of species and species diversity decreased as increasing elevation and going from lower part to upper part of the slope. According to importance percentage and cluster analysis, the valley forest was classified into three forest communities of Quercus serrata-broad-leaved tree species community in lower part of the slope at low elevation belt, middle elevation belt and middle and upper parts of the slope at high elevation belt, Pinus dnsiflora-Quercus serrata community in middle and upper parts at low elevation belt, and Quercus mongolica-broad-leaved tree species community in lower part of the slope at high elevation belt and top area.

• Journal of the Korean Society of Costume
• /
• v.40
• /
• pp.95-107
• /
• 1998

The purpose of this research paper is to offer basic data for cloth design which is intended to apply appropriate shape and catacity to cloth. Followings are the analyzed result of investigation which was conducted to figure out the character of middle aged from 35 to 59 years old-women body especially in lower half of their body. 177 women took part in this investigation. 1. As a result of analyzed characters for middle aged women body shape, taking a side view of body, there are great variance in thickness coefficient which indicates the size of body. 2. According to a comparison result of early middle aged women body shape with late middle aged women body shape, the value in height items get shorter otherwise the value in thickness items get longer getting older. It means late middle aged women are relatively fat. 3. For the analysis of women body especially in lower half, 8 factors were used. They are as followings. Factor 1. Side thickness of lower half. Factor 2. Width of lower half. Factor 3. Height of lower half Factor 4. Droop of underbelly Factor 5. Salient rate of buttocks. Factor 6. Length of buttocks. Factor 7. Salient rate of underbelly. Factor 8. Droop of buttocks 4. Lower half shapes of middle aged women were divided into three groups and the character of each group are as followings. 〈Group 1〉65.0% of women who took part in this investigation have this type of body shape. They have long value in height items and thickness items. 〈Group 2〉16.4% of women who take part in this investigation were belonged to this group. The value in height items were not so different from group 1 but the thickness value are shorter than group 1. Women of group 2 have slime body shape. 〈Group 3〉18.6% of women were belonged to group 3. They show the shortest value in height items otherwise the longest value in thickness items. Therefore they are the smallest and the fattest group in this investigation.

• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.735-747
• /
• 2002

This study aimed at investigating the change of fat in each body part according to the wearing of sport underwear made of specially-processed materials. in this study. 6 females made up of three early twenties, and three later thirties took part in the exercises for 12 weeks to to out the change of fat amount in body, square of body part by CT and obesity after and before an exercise. The results are as follows: In the obesity condition after and before an exercise, Roller's index shows that in case of 51 and 54, one level was lowered concerning the basic physical strength and optimal index was not changed. In the silhouette between body frames. there are differences between ages. The body fat rate decreased 35.95% on the average. and the amount of the body fat of females in twenties was more than that in thirties. The amount of body fat decrease with the lapse of exercising time, while the amount of body fat shows increased of 0.75%, which showed the minus correlation. The rate of averaged flat by CT went up after an exercise in every body part. and also the decreased value of subcutaneous fat was not proportioned to that of weight and girth. Inbody parts, the lower abdomen was shown 49.7%, navel part 47.7% and waist part 37.3% each in numerical value. In the thickness of subcutaneous fat concerning waist, the value of front-center line was the lowest, and followed by rear-center line and lateral line. 1204degree part in the navel showed the most fat layed, and the lowest fat layed was in the lateral part. Concerning the lower part of abdomen, under-skin fat was the most layed in 120degree part like that of navel part.

• Journal of the Korean Home Economics Association
• /
• v.17 no.2
• /
• pp.1-8
• /
• 1979

Recently, the Korean women has been steadily growing in number of wearing slacks , therefore the measurement data on lower part of body for slacks pattern construction have become needed. Thus, in order to obtain the measurement data, 304 of sophomore and junior classes form universities and colleges in Seoul city area were selected on purposed and , set to the object of study. In the course of measurement , thirteen items on lower part of body which is the basis of slacks pattern construction were measured, and then average balue, standard deviation and the mutual correlation were obtained.

• Korean Journal of Human Ecology
• /
• v.14 no.2
• /
• pp.303-312
• /
• 2005

The purpose of this research is to analyze the lower part of dress forms with different sectional rotation-angles ($e.g.\;9^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ}$) using three-dimensional measurement system and to investigate measurement properties for dress making. The dress forms used in this experiment were size 8 and six types: four from Korea and two from Japan. The instrument and tools for three-dimensional measurement was Whole Body 3D scanner (Exyma-WBS2H). The analysis program used in this experiment was Rapid Form 2004 PP1 (INUS technology, Inc, Korea). The measurement of dress forms was done three times with different sectional rotation-angles and its data were analyzed using SPSS WIN 10.0 Package. The following results were obtained: 1. With mean and standard deviation of each measured part, it was found out that the dress forms from two countries were different in size per each part. For example, the Japanese one was relatively large in middle hip and hip, compared to the Korean one. 2. The 3D analysis of the sectional rotation-angles revealed some differences between the two dress forms in sectional length per each part. 3. With cluster analysis results, it was found that there were definite differences among measurements per each part, especially in $30^{\circ}\;and\;45^{\circ}$ sections. 4. The proportion of the dress forms showed significant differences in the curvature between center and side section of the lower parts. In addition, the shapes on the horizontal section map of the four levels (waist, middle hip, hip, and bottom) were analyzed.

• The KIPS Transactions:PartD
• /
• v.8D no.3
• /
• pp.273-284
• /
• 2001

A systematic approach for interpreting Korean addresses based on postal code is presented in this paper. The implementation is focused on producing the final delivery point code from various types of address recognized. There are two stages in the address interpretation : 1) agreement verification between the recognized postal code and upper part of the address and 2) analysis of lower part of the address. In the agreement verification procedure, the recognized postal code is used as the key to the address dictionary and each of the retrieved addresses is compared with the words in the recognized address. As the result, the boundary between the upper part and the lower part is located. The confusion matrix, which is introduced to correct possible mis-recognized characters, is applied to improve the performance of the process. In the procedure for interpreting the lower part address, a delivery code is assigned using the house number and/or the building name. Several rules for the interpretation have been developed based on the real addresses collected. Experiments have been performed to evaluate the proposed approach using addresses collected from Kwangju and Pusan areas.

• Korean Institute of Interior Design Journal
• /
• v.27 no.1
• /
• pp.132-139
• /
• 2018

The high-rise and high-density apartment complexes are built on a large scale and occupy a large portion of the city. The facade of the apartment has a great influence on the cityscape. In particular, the lower part of apartment design gives people to important impressions. For the harmonious landscape of the city, the color plan emphasizes its importance as an influential visual design element that forms the urban landscape. In specialized apartment design, especially finishing material on lower-parts of apartment which is recognized by pedestrian is more important planning factor. Also, finishing material which is one of the primary design elements is important for making the entire image about the building with color. Nowadays stone is mostly used for specialized design on lower-level in apartments. Stone makes luxurious image and harmonious landscape as a nature material. But when planning for design, only general stone graphic or pictures is used without specific plan, after construction, there is a big difference between a plan and the actual color and image. Thus based on exact understanding of stone, I analyzed current state of expression for stone which is used for lower-parts of apartments in Daegu. By this, the purpose of this study is to present detailed data to offer the basis for planning specialized design of lower-parts of apartment.

• Transactions of Materials Processing
• /
• v.30 no.5
• /
• pp.236-241
• /
• 2021

This study describes the cold stamping process design procedure to secure the formability and dimensional accuracy of the automotive structural component fabricated by 1.5GPa grade ultra-high strength steel sheet. The target product is selected as the front side rear lower member which is the most important energy absorption part in the frontal impact condition. To secure the product quality, an intermediate product shape is added while considering the low elongation and high strength characteristics of 1470Mart. The sequential optimization procedure of the intermediate product shape, the fine dimensional quality is then achieved without any crack or wrinkling. The cold stamping method with ultra-high strength steel sheets is validated by conducting the die tryout of the front side rear lower member.