• 한국전문물리치료학회지
• /
• 제8권3호
• /
• pp.1-10
• /
• 2001

The purpose of this study was to compare the static pressure, dynamic pressure, dynamic pressure-time integral, relative impulse, and contact time between the sound lower limb and amputated lower limb in trans-tibial amputee subjects using Parotec system. Seventeen trans-tibial amputee subjects wearing endoskeletal trans-tibial prosthesis voluntarily participated in this study. The results were as follows: 1) In static standing condition, there were significantly higher static pressure in sound lower limb insole sensor of 10, 14, 15, 18, 19, 23, and 24 and in amputated lower limb insole sensor of 9, 12, and 16 (p<.05). 2) In dynamic gait condition, there were significantly higher dynamic pressure in sound lower limb insole sensor of 2, 18, 22, 23, and 24 and in amputated lower limb insole sensor of 5, 9, 10, 11, 12, 14, 15, and 16 (p<.05). 3) In dynamic gait condition, there were significantly higher pressure-time integral in sound lower limb insole sensor of 2, 4, 18, 19, 20, 21, 23, and 24 and in amputated lower limb insole sensor of 5, 11, 12, and 15 (p<.05). 4) In dynamic gait condition, there were significantly higher relative impulse in sound lower limb insole sensor of 18, 19, 20, 22, 23, and 24 and in amputated lower limb insole sensor of 5, 9, 10, 11, 12, and 15 (p<.05). 5) In dynamic gait condition, there was significantly higher percentage of contact time in push off phase of sound lower limb and in support phase of amputated lower limb (p<.05). These results suggest that trans-tibial amputee subjects had characteristics of shortened push off phase due to unutilized forefoot and of lengthened support phase with higher pressure in the midfoot.

• 한국운동역학회지
• /
• 제15권4호
• /
• pp.131-142
• /
• 2005

This study was investigated the stability of the AK amputee gait through analysing the variability on kinematic variables between the sound leg and the prosthetic limb. The one male, AK amputee who could walk for himself with his prosthetic limb was participated in this study. Six cameras of the MCU 240 and the QTM(Qualisys Track Manager) software were used for data collecting in this study. The relative angle of both segments was the difference between the absolute angle of the distal segment and the absolute angle of the proximal segment. The coupling angles between the prosthetic limb and the sound leg were caculated on the thigh Flexion/Extension in relative to the shank Flexion/Extension and the shank Flexion/Extension n relative to the foot Flexion/Extension. In order to evaluate the variability of segment and joint angle, C.V. was used, and to evaluate the variability for coupling angles, the Relative motion calculated by vector coding method of the continuous methods was used. As stated, the gait pattern of the prosthetic limb was almost similar gait pattern of the sound leg, but the prosthetic limb showed that the gait pattern of the sound leg and the prosthetic limb were not stable against the sound leg.

• 로봇학회논문지
• /
• 제19권2호
• /
• pp.159-168
• /
• 2024

Lower limb amputees are increasing due to various reasons. It is difficult for lower limb amputees to walk without an assistive device such as a prosthetic leg. In this paper, an electronically controlled knee-type prosthetic leg with a 4-bar linkage structure for lower limb amputees was developed. The knee-type prosthetic leg has a 4-bar linkage structure and assists walking by using an integrated drive module. The torque is 90 Nm, the rotation speed is up to 120 deg, and it weight 1.9 kg, so it is lighter than a commercial prosthetic leg, so it can be used for a long time because there is less fatigue when walking. An integrated control board was developed by applying various sensors and microprocessor. The motor drive and encoder are built into the integrated drive module. The integrated control board and integrated drive module communicate using CAN. When a lower limb amputee wears a knee-type prosthetic leg and walks, it shows a shape similar to the swing phase graph of a normal people, and it is possible to walk naturally while walking.

• 대한물리치료과학회지
• /
• 제12권4호
• /
• pp.33-41
• /
• 2005

The purpose of this report was to describe the gait pattern and parameters of the complicated bilateral amputee with right transtibial and left tarsometatarsal amputation. Using a Vicon 370 three dimensional gait analysis system, the gait analysis was performed at pre and post-test. Treadmill Training with 15 degree, incline was practiced for 8weeks, 3times per week. In linear parameters, the Velocity, Stride length and Single limb support were increased than pre-test. but Cadence and Double limb support were less post-test than pre-test. In kinematics, the maximal pelvic tilt angle showed right side $21.87^{\circ}$, left side $20.67^{\circ}$ at pre-swing phase, and decreased as compared with pre-test. Especially, the inimal hip flexion angle showed right side $-6.83^{\circ}$, left side $1.52^{\circ}$ at pre-swing phase and increased as compared with pre-test. The maximal knee flexion angle disclosed right side $2.66^{\circ}$, left side $21.71^{\circ}$ at stance phase, and decreased as compared with pre-test. In kinetics, the hip extension moment on initial contact stage was right side 0.938NM/Kg, left side 0.09NM/Kg, which was impaired compared with normal person.

• 한국운동역학회지
• /
• 제23권1호
• /
• pp.77-83
• /
• 2013

The purpose of this study was to compare kinematic variables and stiffnesses of ankle joints between normal person and transfemoral amputee gait in order to develop or fit prosthetic leg. Twenty subjects (ten normal persons and ten transfemoral amputees) participated in this experiment, and walked three trials at a self-selected pace. The gait motions were captured with Vicon system and variables were calculated with Visual-3D. The velocity, stride length, stride width, cycle time, double limb support time and right swing time of gaits were statistically significant. Because coefficients of variability of normal persons on velocity, double limb support time and swing time were greater than transfemoral amputees, normal persons controlled these gait variables effectively. The stiffnesses of ankle joints were not statistically significant, but patterns of stiffnesses of ankle joints during three rockers were absolutely different. The negative correlations between stiffnesses of ankle joints and cycle time and swing time were presented. These differences suggest that developing and fitting prosthetic leg were demanded. Further studies should develop fitting program and simulator of prosthetic leg.

• 한국정밀공학회지
• /
• 제29권2호
• /
• pp.239-244
• /
• 2012

The prevalence of knee osteoarthritis was higher people with lower limb amputation. This was identified that transfemoral amputees have a greater external knee adduction moment than ablebodied subjects by biomechanical studies. Therefore, they need rehabilitative intervention for prevention and reduction of knee osteoarthritis. The purpose of this study was to determine the effect of lateral wedge insole used in the treatment of knee osteoarthritis. This study was participated in fourteen unilateral transfemoral amputees and we were analyzed the difference gait variables between without lateral wedge insole and with $5^{\circ}$ and $10^{\circ}$ lateral wedge insole during gait. Our results showed that step length ratio was more symmetrical and, hip adduction and ankle inversion angle were more close to normal value, and knee adduction moment was decreased as the wedge angle increases. We proposed that these data would be utilized conservative treatment of knee osteoarthritis in lower limb amputees.

• 재활복지공학회논문지
• /
• 제10권4호
• /
• pp.305-313
• /
• 2016

두 발을 번갈아 옮기며 몸을 앞으로 움직이는 단순한 동작의 반복으로 보이는 보행이란 과정은 실제 인체 내의 대부분의 근육 및 인대, 뼈가 연관되어 이루어지는 복잡한 행동이다. 신체 일부가 소실된 하퇴 절단자의 경우 생체조직이 온전히 보전되어 있는 일반인과는 달리 남은 생체 부위와 의지의 공학적인 성능에만 의존해 보행을 해야 한다는 어려운 상황에 직면하게 된다. 따라서 하퇴절단자를 위한 하퇴의지는 우선 환자가 기본적인 보행이 가능케 함과 동시에 최대한 복잡한 지면 상태에 적응할 수 있도록 설계가 되어야 한다. 원활한 보행을 위해서는 배/저굴 방향의 발목의 회전이 매우 중요하고 고르지 못한 지면 상태를 극복하기 위해서는 내/외전 방향의 족부의 회전 기능이 요구된다. 최근 생체역학적인 연구를 접목한 다양한 하퇴의지가 개발되고 있으나, 이러한 고가의 고성능 하퇴의지의 경우 주로 활동성이 높은 하지절단 환자들에 초점이 맞춰져 있다. 본 연구에서는 하퇴의지 착용자의 대다수인 활동성이 낮은 K2 레벨의 환자들을 위한 하퇴의지를 개발했다. 기본적인 보행 능력 향상을 위해서 배/저굴 방향으로의 회전이 가능한 유압식 발목을 개발했고, 이를 통해서 배/저굴 방향으로 각각 $2.5^{\circ}$와 $4^{\circ}$의 회전이 가능함을 확인했다. 또한 수동 조절이 가능한 유압 노즐을 탑재해 환자 개개인에 적합한 발목 회전 저항력을 설정할 수 있도록 설계했다. 내/외전 방향으로의 족부의 회전이 가능하도록 이중고무 방식의 중간재를 삽입해 각각 $3.6^{\circ}$와 $4.1^{\circ}$의 회전이 가능하도록 설계되어 측경사나 작은 장애물들을 극복할 수 있도록 제작했다. 본 연구를 통해 개발된 하퇴의지는 K2 레벨의 하퇴절단자들이 일상생활 중에 겪게 되는 다양한 지면 환경을 극복하는데 도움을 줄 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1070-1073
• /
• 2002

The biomechanical interaction between the stump and the prosthetic socket is critically important to achieve close-to-normal ambulation. Many investigators suggested that the pressure changes during gait of transfemoral amputees are closely related to the prosthetic alignment, the socket shape, the stump size, and the residual muscle activity. The effects of the prosthetic alignment, the socket shape, and the stump size on the interface pressure were investigated previously. However, there is no report how the residual muscle activities in the transfemoral stump affect the socket interface pressure characteristics during gait. Since designs of socket fur lower limb amputees need to consider the socket interface pressure characteristics, the interface pressure patterns by the residual muscle activities during gait should be investigated. In this study, myoelectric signals (MES) and socket interface pressure in residual limb of transfemoral amputees were measured during the stance and swing phases of gait. For the purpose, specially designed quadrilateral sockets that MES electrodes could be instrumented were fabricated. A total of two transfemoral amputees were participated in the experiments. The measured temporal MES amplitude and interface pressure in knee flexor (biceps femoris) and extensor (rectus femoris) had significant correlations (P ＜ 0.05). Based on the test results, It was suggested that the residual muscle activity of transfemoral amputees stump is an important factor affecting socket pressure changes during walk.

• 융합신호처리학회논문지
• /
• 제25권2호
• /
• pp.77-85
• /
• 2024

의족과 절단단을 연결해주는 현가장치는 하지 절단 장애인이 의족착용을 가능하게 하며 보행뿐만 아니라 일상생활 중에서도 항상 절단단과 접촉되어 있어 의족 사용 중 가장 민감하게 느끼는 부분이다. 본 논문에서는 영구자석의 인력과 척력의 원리를 이용하여 자석의 극성변화로 하지 절단 장애인들의 절단단과 의족을 고정할 수 있는 자석락 현가장치를 개발하였다. 자석락의 작동 방식은 비자성체인 황동심을 기준으로 좌우에 네오디움 자석을 NNSS로 배치 시 자력은 흡착부재를 매개체로 하여 황동심을 넘어 외부로 흘러 결합력이 발생하며, 90도 회전 시 자석은 NSNS로 위치 이동하며 자력이 내부로 흘러 상쇄되는 원리이다. 이를 바탕으로 인장강도를 통한 결합력 시험 및 비교군인 셔틀락 현가장치와의 단기적인 의족 비교 평가를 수행하여 시제품에 대한 신뢰성 검증 및 만족도를 평가하였다. 그 결과 적정 결합력을 상회하는 인장강도를 확인하였으며 자석락이 셔틀락 대비 높은 만족도를 나타냈다. 추후 제품화를 위한 장기적인 ADL 임상시험을 수행해 실제 절단 장애인들에게 보급 가능한 제품으로 개발하고자 한다.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.621-632
• /
• 2009

The purpose of this study was to analyze the physical characteristic of the wheelchair users by directly measuring the disabled men who use a wheelchair and to classify body types. The subjects were 178 male wheelchair users 20-69 years range of age. The results of this study were as follows. The cause of disability was classified into four groups; Poliomyelitis(P), Spinal Cord Injury(S), Cerebral Palsy(C), Amputee(A). There was a remarkable difference in the physical characteristic of the wheelchair users due to their cause of disability. A have greater values in all the dimensions. P have the largest drop values and smaller values in the lower body dimensions. S have greater values in the height of upper body trunk, back interscye length, and chest circumference, whereas smaller values in waist front length and thigh circumference. C have smaller values in most body dimensions except circumference of lower limb. By the factor analysis on the anthropometric data came out the result to be eight factors. The result of cluster analysis using factor scores shows the body types of wheelchair users can be divided into four body types; PY, RBB, TBP, RA. PY type is short and has the largest drop values, whereas RBB type tends to have the smallest drop values. TBP type is tall and the torso tends to be larger than those of the other types. RA type has smaller values in front body dimensions and moderate values in other dimensions. The diversity in body types should be considered among the wheelchair users.