• 제어로봇시스템학회논문지
• /
• 제12권4호
• /
• pp.380-388
• /
• 2006

A noisy behavior of the time domain passivity controller during the period of low velocity is analyzed. Main reasons of the noisy behavior are investigated through a simulation with a one-DOF (Degree of Freedom) haptic interface model. It is shown that the PO/PC is ineffective in dissipating the produced energy when the sign of the velocity, which is numerically calculated from the measured position, is suddenly changed, and when this velocity is zero. These cases happen during the period of low velocity due to the limited resolution of the position sensor. New methods, ignoring the produced energy from the velocity sign change, and holding the control force while the velocity is zero, are proposed for removing the noisy behavior. The feasibility of the developed methods is proved with both a simulation and a real experiment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.271-273
• /
• 2009

Because few signals are generated using low resolution position sensor at low speed, rotor position estimation is difficult in drum washing machine application. Besides, inertia of water and drum affect the initial operation load up to two times of rated load. Therefore overcurrent can be occurred at initial operation. In this paper, IPMSM vector control for drum washing machine is proposed by applying I/F initial operating method and sensorless control. And we verify the performance through experiment.

• 한국측량학회지
• /
• 제26권3호
• /
• pp.263-273
• /
• 2008

위치 센서를 기반으로 하는 디지털 지도의 구축과 이로부터의 도로의 추출과 같은 생성물의 정확도는 센서의 위치 정확도에 좌우되며, 센서의 위치결정을 위하여 GPS, 토탈스테이션, 레이저거리계 등 다양한 거리측정시스템들이 사용되어 왔다. 일반적으로 거리측정시스템들은 주위 다양한 환경에 따라 신호단절 및 감퇴의 문제점과 낮은 시간해상도를 가지고 있다. 이러한 한계를 극복하기 위해 관성 장치와 같은 자동 항법 장치를 이용하여 상호 보완 및 통합하여 IMU/Range 통합 시스템을 구성 할 수 있다. 본 논문에서는 항법 및 측지분야에서 성공적으로 사용되어 왔던 선형필터인 확장 칼만 필터(Extended Kalman Filter, EKF)의 문제점을 지적하고, 비선형 변환과 선택된 시그마 포인트를 이용한 시그마 포인트 칼만 필터(sigma point Kalman filter, SPKF)와 비가우시안 가정과 샘플링 방식의 파티클 필터(Particle filter, PF) 등 두가지 비선형 필터를 구현하고, 시뮬레이션을 수행하여 그 결과를 확장 칼만 필터의 경우와 비교하였다. 시뮬레이션의 거리측정시스템으로 GPS와 토탈스테이션이 사용되었고 IMU의 경우, 정밀도 레벨에 따른 일반적인 3가지 센서(IMU400C, HG1700, LN100)가 선택되었다. 모든 IMU와 거리측정시스템에 대해서 샘플링 기반의 비선형 필터인 SPKF와 PF가 EKF에 비해 통계 결과에서 향상된 위치 결과를 보여 주었으며 특히 거리측정시스템의 갱신간격이 길어질수록(1초$\rightarrow$5초) 비선형 필터의 우수성이 나타났다. 따라서 저가형 위치센서의 경우, 비선형 필터를 적용하여 센서 위치의 정확도를 높일 수 있는 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.164-169
• /
• 2020

Use of SiPM has been considered as an alternative to PMT, because of its compact size, low-operating voltage, non-sensitive to electromagnetic, low costs and so on. The main limitation for the use of SiPM is due to its small sensitive area compared to PMT that limits the light collection, and therefore the sensor energy resolution. In this article we studied the effect of increasing the number of SiPM by connecting them in parallel to increase the active detection area. This allowed us to compare the different energy resolution measurements. ¹³⁷Cs has been selected as reference to study the energy resolution for 662 keV gamma-rays. Another investigation was to compare the minimum detectable gamma energy under various SiPM configurations. It has been found that the use of 4 SiPM arrays can greatly improve the energy resolution up to 4% than only one SiPM array, meanwhile use of more than 2 SiPM arrays does not increase the energy resolution significantly. Thus we can conclude that for a large area of cylindrical scintillator (3 × 3 inches), the use of SiPMs are limited to a certain number or certai active area depending on the commercial SiPMs, and its cost should be less than traditional PMT for the cost-effective and compact size considerations. It is well known that the gain of SiPM varies with temperature. In this article, we also calibrated gain to guarantee the same position of photoelectric peak in response of different temperatures.

• 한국정밀공학회지
• /
• 제24권9호
• /
• pp.60-67
• /
• 2007

A signal conditioning circuit for capacitive displacement sensors was developed using a high frequency modulation/demodulation method, and its performance was evaluated. Since capacitive displacement sensors can achieve high resolution and linearity, they have been widely used as precision sensors within the range of several hundred micrometers. However, they inherently have a limitation in low frequency range and some nonlinearity characteristics and so a specially designed signal conditioning circuit is needed to handle these properties. The developed signal processing circuit consists of three parts: linearization, modulation/demodulation, and nonlinearity compensation. Each part was constructed discretely using several IC chips and passive elements. An evaluation system for precision displacement sensors was developed using a laser interferometer, a precision stage, and a PID position controller. The signal processing circuit was tested using the evaluation system in the respect of resolution, repeatability, linearity, and so on. From the experimental results, we know that a highly linear voltage output can be obtained successfully, which is proportional to displacement and the nonlinearity of output is less than 0.02% of full range. However, in the future, further investigation is required to reduce noise level and phase delay due to a low-pass filter. The evaluation system also can be applied effectively to calibration and evaluation of precision sensors and stages.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.6-8
• /
• 1994

Switched reluctance motor drive system is well known as a variable speed drive system because it has a simple motor structure and a simple driving circuit. Widely slotted photo interrupter has been investigated as a position sensor for SRM speed control because it has advantages of low cost and simple structure. However it has low resolution and it produces dead-time signal. This paper studies variable speed SRM drive system with slotted photo-interrupter. Controller in this study is constructed by using fuzzy controller that covers system nonlinearities and small perturbations in sufficiency. The performance of this system is evaluated through computer simulation and experiment results.

• 융합신호처리학회논문지
• /
• 제11권1호
• /
• pp.63-73
• /
• 2010

본 논문에서는 위치 불확실성이 최소화되도록 중첩 초음파 센서 링을 최적 설계하는 방법과 이를 향상된 해상도의 장애물 탐지에 응용하는 방안에 대해 기술하도록 한다. 기본적으로 일군의 초음파 센서들이 일정 간격으로 상호 빔 폭이 중첩되도록 원형으로 배치된다고 가정한다. 첫째, 빔 폭 중첩 상태를 활용함으로써 초음파 센서 고유의 위치 불확실성을 현저히 감소시킬 수 있음을 보인다. 둘째, 반경이 영인 이상적인 중첩 초음파 센서 링에 대해, 위치 불확실성을 나타낼 수 있도록 유효 빔 폭의 개념을 도입하고, 유효 빔 폭을 최소화하기 위해 필요한 초음파 센서의 최적 개수를 구한다. 셋째, 일정 반경의 실제 중첩 초음파 센서 링을 대상으로, 위치 불확실성 정도를 표현하는 설계 지수를 정의하고, 상용 저지향성 초음파 센서를 구성되는 중첩 초음파 센서 링의 최적 설계 예를 제시한다. 넷째, 초음파 센서의 측정 거리로부터 이동로봇 중심 기준 장애물의 위치를 산정하기 위한 기하학적 방법을 기술한다. 마지막으로, 한 쪽이 열린 평면 장애물 탐지 실험을 통해, 자체 제작된 초음파 센서 링의 장애물 탐지 해상도가 향상됨을 입증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.99-101
• /
• 2009

자동차의 조향 장치에서 연비 절감과 조향성능의 향상을 위해 연구되고 있는 전동식 파워스티어링 시스템은 기존의 유압식에 비해 소음과 진동이 발생하는 단점을 가지고 있다. 이를 감소시키기 위해 토크 리플을 줄이는 것이 관건이고, 토크 리플을 발생시키는 큰 원인 중 하나가 위치 센서 분해능 제한이다. 본 논문에서는 가격 절감을 위해 낮은 분해능의 위치 센서로 전동식 파워스티어링 시스템의 토크 리플을 저감하기 위해 위치 추정 기법을 제안하고, 실험을 통해 이를 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.186-186
• /
• 2000

In the GPS/DR integrated system, the GPS position(or velocity) is used to compensate the DR output and to calibrate errors in the DR sensor. This synergistic relationship ensures that the calibrated DR accuracy can be maintained even when the GPS signal is blocked. Because of the observability problem, however, the DR sensors are not sufficiently calibrated when the vehicle speed is low. This problem can be solved if we use a multi-antenna GPS receiver for attitude determination instead of conventional one. This paper designs a two-antenna GPS receiver integrated with DR sensors. The proposed integration system has three remarkable features. First, the DR sensor can be calibrated regardless of the vehicle speed with the aid of two-antenna GPS receiver. Secondly, the search space of integer ambiguities in GPS carrier-phase measurements is reduced to a part of the surface of the sphere using DR heading. Thirdly, the detection resolution of cycle-slips in GPS carrier-phase measurements is improved with the aid of DR heading. From the experimental result, it is shown that the search grace is drastically reduced to about 3120 of the non-aided case and the cycle-slips of 1 or half cycle can be detected.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권2호
• /
• pp.72-79
• /
• 2001

In the GPS/DR integrated system, the GPS position(or velocity) is used to compensate the DR output and to calibrate errors of the DR sensor. This synergistic relationship ensures that the calibrated DR accuracy can be maintained even when the GPS signal is blocked. Because of the observability problem, however, the DR sensors are not sufficiently calibrated when the vehicle speed is low. This problem can be solved if we use a multi-antenna GPS receiver for attitude determination instead of conventional one. This paper designs a two-antenna GP receiver integrated with DR sensors. The proposed integration system has three remarkable features. First, the DR sensor can be calibrated regardless of the vehicle speed with the aid of two-antenna GPS receiver. Secondly, the search space of integer ambiguities in GPS carrier-phase measurements is reduced to a part of the surface of the sphere using DR heading. Thirdly, the detection resolution of cycle-slips in GPS carrier-phase measurements is improved with the aid of DR heading. From the experimental result, it is shown that the search space is drastically reduced to about 3/20 of the non-aided case and the cycle-slips of 1 or half cycle can be detected.