• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.2
• /
• pp.239-250
• /
• 2022

LoRa is a physical layer technology designed to secure highly reliable long-range communication with introducing loco parentis tree network and chirp spreading spectrum. Since since a leaf can send message to more than one parents simultaneously with a single transmission in a region, packet delivery ratio increases logarithmically as the number of gateways increases. The delivery ratio, however, dramatically collapses even under loco parentis tree topology due to the limitations of ALOHA-like primitive MAC, . The proposed method is intended to exploit SDMA approach to reuse frequency in an area. With the view, TxPower of each sender for each message in a concurrent transmission is elaborately controlled to survive the collision at different gateway. Thus, the gain from the capture effect improves the capacity of resource-hungry Low Power and Wide Area Networks.

• Journal of Korea Multimedia Society
• /
• v.19 no.10
• /
• pp.1808-1815
• /
• 2016

TPSN(Timing-sync Protocol for Sensor Networks), the representative of time synchronization protocol, has been already developed to provide time synchronization among nodes in wireless sensor networks. Even though the TPSN's method has been referenced by so many other time synchronization schemes for resource-constrained networks like wireless sensor networks or low power personal area networks, it has some inefficiency in terms of power consumption and network-wide synchronization time (or called convergence time). The main reason is that each node in TPSN needs waiting delay to solve the collision problem due to simultaneous transmission among competing nodes, which causes more power consumption and longer network convergence time for a network-wide synchronization. In this paper an improved scheme is proposed by changing message exchange method among nodes. The proposed scheme not only shortens network-wide synchronization time, but also reduce collision traffic which lead to needless power consumption. The proposed scheme's performance has been evaluated and compared with an original scheme by simulation. The results are shown to be better than the original algorithm used in TPSN.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1105-1112
• /
• 2022

Field data monitoring systems such as renewable energy generation and smart farm integrated control are developing from PC and server to mobile first, and various wireless communication and application services have emerged with the development of IoT technology. Low-power wide-area networks are services optimized for low-power, low-capacity, and low-speed data transmission, and data collected in the field is transmitted to designated storage servers or cloud-based data platforms, enabling data monitoring. In this paper, we implement an IoT repeater that collects field data with a single device and transmits it to a wireless carrier cloud data flat using a low-power wide-area network, and a monitoring app using it. Using this, the system configuration is simpler, the cost of deployment and operation is lower, and effective data accumulation is possible.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.5
• /
• pp.141-148
• /
• 2009

Wireless Sensor Networks (WSN) can be applied to various industry fields and environment analysis fields with the progress of various sensor technologies. Also WSN help automatically monitoring of sensor nodes installed at wide area. Especially, the tiny sensor nodes recently developed for the environment analysis require much more electronic power. The reasons are the measurable fields are departmentalized and the more detailed measuring fields are created by the development of various materials and applications. Furthermore, the sensor nodes operated by small batteries for the fields require low cost and low power consumption in wireless networks technology. The power efficiency is the most important factor for the WSN life time. Because the sensor nodes are installed at wide area and hard to recover. This paper proposes the WSN algorithm is applied sensor node that has low power consumption and efficiency measurement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.283-288
• /
• 2019

LPWA (Low Power Wide Area) networks have been considered as one of the technologies which can be implemented in IoT (Internet of Things) applications by providing less power and longer communication range compared with existing wireless technologies. In this paper, we investigate LoRa which is one of representative technologies for LPWA networks. First, we present general properties and several technologies of LPWA networks. Then, the technical specification, properties, and pros/cons of LoRa are studied. Finally, we discuss analysis of LoRa's performance and its ehancement technologies by focusing on physical layer and MAC (Medium Access Control) layer.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2018

Wide-area monitoring of tree-related high impedance fault (THIF) efficiently contributes to increase reliability of large-scaled network, since the failure to early location of them may results in critical lines tripping and consequently large blackouts. In the first place, this wide-area monitoring of THIF requires managing the placement of sensors across large power grid network according to THIF detection objective. For this purpose, current paper presents a framework in which sensors are distributed according to a predetermined risk map. The proposed risk map determines the possibility of THIF occurrence on every branch in a power network, based on electrical conductivity of trees and their positions to power lines which extracted from spectral data. The obtained possibility value can be considered as a weight coefficient assigned to each branch in sensor placement problem. The next step after sensors deployment is to on-line monitor based on moving data window. In this on-line process, the received data window is evaluated for obtaining a correlation between low frequency and high frequency components of signal. If obtained correlation follows a specified pattern, received signal is considered as a THIF. Thereafter, if several faulted section candidates are found by deployed sensors, the most likely location is chosen from the list of candidates based on predetermined THIF risk map.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2302-2322
• /
• 2012

Wireless Body Area Networks (WBANs) are introduced as an enabling technology in tele-health for patient monitoring. Designing an efficient Medium Access Control (MAC) protocol is the main challenge in WBANs because of their various applications and strict requirements such as low level of energy consumption, low transmission delay, the wide range of data rates and prioritizing emergency data. In this paper, we propose a new MAC protocol to provide different requirements of WBANs targeted for medical applications. The proposed MAC provides an efficient emergency response mechanism by considering the correlation between medical signals. It also reduces the power consumption of nodes by minimizing contention access, reducing the probability of the collision and using an efficient synchronization algorithm. In addition, the proposed MAC protocol increases the data rate of the nodes by allocating the resources according to the condition of the network. Analytical and simulation results show that the proposed MAC protocol outperforms IEEE 802.15.4 MAC protocol in terms of power consumption level as well as the average response delay. Also, the comparison results of the proposed MAC with IEEE 802.15.6 MAC protocol show a tradeoff between average response delay and medical data rate.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.163-172
• /
• 2004

Ultra Wide Bandwidth (UWB) spread-spectrum techniques will playa key role in short range wireless connectivity supporting high bit rates availability and low power consumption. UWB can be used in the design of wireless local and personal area networks providing advanced integrated multimedia services to nomadic users within hot-spot areas. Thus the assessment of the possible interference caused by UWB devices on already existing narrowband and wideband systems is fundamental to ensure nonconflicting coexistence and, therefore, to guarantee acceptance of UWB technology worldwide. In this paper, we study the coexistence issues between an indoor UWB-based system (hot-spot) and outdoor point to point (PP) links and Fixed Wireless Access (FWA) systems operating in the 3.5 - 5.0 GHz frequency range. We consider a realistic UWB master/slave system architecture and we show through computer simulation, that in all practical cases UWB system can coexist with PP and FWA without causing any dangerous interference.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.194-198
• /
• 2021

LoRa is a physical layer technology that is designed to provide a reliable long-range communication with introducing CSS and with introducing a loco parentis tree network. Since a leaf can utilize multiple parents at the same time with a single transmission, PDR increases logarithmically as the number of gateways increases. Because of the ALOHA-like MAC of LoRa, however, the PDR degrades even under the loco parentis tree topology similarly to the single-gateway environment. Our proposed method is aimed to achieve SDMA approach to reuse the same frequency in different areas. For that purpose, it elaborately controls each TxPower of the senders for each message in concurrent transmission to survive the collision at each different gateway. The gain from this so-called capture effect increases the capacity of resource-hungry LPWAN. Compared to a typical collision-free controlled-access scheme, our method outperforms by 10-35% from the perspective of the total count of the consumed time slots. Also, due to the power control mechanism in our method, the energy consumption reduced by 20-40%.

• KNOM Review
• /
• v.22 no.2
• /
• pp.29-38
• /
• 2019

The rapid growth of IoT (Internet of Things) owing to the advancement and spread of technologies such as wireless networks, communication modules, sensors, smart terminals, etc. enables the development of new services in diverse public and private sectors. In particular, research on IoT technology and its applications has increased in the field of science. To establish an IoT infrastructure in this field, KREONET launched the wireless IoT network, called ScienceLoRa, based on low power wide area network (LPWAN). ScienceLoRa aims to collect a variety of data from sensors and utilize and analyze the collected data for research in a variety of scientific fields. In this article, the authors present the concept, current status, applications and future plans of ScienceLoRa.