• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.1
• /
• pp.92-98
• /
• 1997

In this paper, the results of the measurement and analysis of extremely low freqency(ELF) eletric field in the vicinity of 154[kV] overhad transmission lines have been described. The planar-type electric field sensor has been fabricated by three dimensional structure with special consideration of taking the power frequency and lower components. The calibration experiments have been carried out according to the procedures of IEEE recommendation. The electric field measuring system has the frequency bandwidth of 7[Hz] to 2.7[MHz] and the response sensitivity of 0.094[mV/V/m]. Also the practical measurements of electric field under an 154[kV] double corcuit overhead transmission lines have been made abd abalyzed. It was known that the lateral electric field profiles under an 154[kV] double circuit overhead transmission lines show the asymmetrical distributions owing to the environmental metal frame structures and their maximum electric field magnitude is less than 3[kV/m]. It can be concluded that the measured results of the electric fields satisfy with all limits or guide -lines of the various authorized international institutes' recommendations.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.1
• /
• pp.14-23
• /
• 1997

In this paper, the results of the measurement and analysis of extremely low frequency(ELF) electric field in the vicinity of 154[kV] overhead transmission lines have been described. The planar-type electric field sensor has been fabricated by three dimensional structure with special consideration of taking the power frequency and lower components. The calibration experiments have been carried out according to the procedures of IEEE recommendation. The electric field measuring system has the frequency bandwidth of 7[Hz] to 2.7[MHz] and the response sensitivity of 0.094[mV/V/m]. Also the practical measurements of electric field under an 154[kV] double circuit overhead transmission lines have been made and analyzed. It was known that the lateral electric field profiles under an 154[kV] double circuit overhead transmission lines show the asymmetrical distributions owing to the environmental metal frame structures and their maximum electric field magnitude is less than 3[kV/m]. It can be concluded that the measured results of the electric fields satisfy with all limits or guidelines of the various authorized international institutes' recommendations.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.257-260
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm“Rijndael”. To achieve high throughput rate, a sub-pipeline stage is inserted into the round transformation block, resulting that the second half of current round function and the first half of next round function are being simultaneously operated. For area-efficient and low-power implementation the round transformation block is designed to share the hardware resources in encryption and decryption. An efficient scheme for on-the-fly key scheduling, which supports the three master-key lengths of 128-b/192-b/256-b, is devised to generate round keys in the first sub-pipeline stage of each round processing. The cryptoprocessor designed in Verilog-HDL was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}{\textrm}{m}$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2885-2890
• /
• 2014

Localization of a sensor network node using machine learning has been recently studied. It is easy for Support vector machines algorithm to implement in high level language enabling parallelism. Raspberrypi is a linux system which can be used as a sensor node. Pi can be used to construct IP based Hadoop clusters. In this paper, we realized Support vector machine using python language and built a sensor network cluster with 5 Pi's. We also established a Hadoop software framework to employ MapReduce mechanism. In our experiment, we implemented the test sensor network with a variety of parameters and examined based on proficiency, resource evaluation, and processing time. The experimentation showed that with more execution power and memory volume, Pi could be appropriate for a member node of the cluster, accomplishing precise classification for sensor localization using machine learning.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1610-1618
• /
• 2014

Wearable computer systems can use the wireless universal serial bus (WUSB) that refers to USB technology that is merged with WiMedia PHY/MAC technical specifications. In this paper, we focus on an integrated system of the wireless USB over the IEEE 802.15.6 wireless body area networks (WBAN) for wireless wearable computer systems supporting U-health services. And a communication structure that performs the hibernation for low power consumption is proposed for WUSB over IEEE 802.15.6 hierarchical protocol. In the proposed hibernation mechanisms, WUSB communications are permitted at each m-periodic inactive periods of WBAN superframes by using the WBAN information of Wakeup Period and Wakeup Phase message fields. In our performance evaluations, performances according to amount of WUSB traffic and Wakeup Periods are analyzed respectively to evaluate the effectiveness of proposed hibernation structure in WUSB over IEEE 802.15.6.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.485-487
• /
• 2017

With the growth of the IoT, security is a growing concern. Things the risk of IoT security has been constantly raised, and there have been many cases of hacking. As a result, there is a growing concern and scale about security, but there is a lack of interest and research on the message protocols between Iot devices. With the development of the IoT, the importance of low-power, lightweight and accurate message delivery will become more important and more advanced message protocols will be needed. In this paper, it is aimed to construct the system for communication between client and server of MQTT and CoAP with Confirmative option, which are most used among IoT message protocols and compare the message reliability of each communication protocol to check efficiency.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1329-1336
• /
• 2015

Due to the advances in hardware technologies for low-power CMOS cameras, there have been various researches on wireless video sensor network(WVSN) applications including agricultural monitoring and environmental tracking. In such a system, its core technologies include video compression and wireless transmission. Since data of video sensors are bigger than those of other sensors, it is particularly necessary to estimate precisely the traffic after video encoding. In this paper, we present an estimation method for the encoded video traffic in WVSN networks. To estimate traffic characteristics accurately, the proposed method first measures complexities of frames and then applies them to the bit rate estimation adaptively. It is shown by experimental results that the proposed method improves the estimation of bit rate characteristics by more than 12% as compared to the existing method.

• Journal of The Korean Association of Information Education
• /
• v.8 no.3
• /
• pp.365-372
• /
• 2004

The purpose of this study is to develop FVU, which enables teachers effectively to construct self-page on the screen, to reduce the size of file for teaching, and to correct many different kinds of event which was already made in the previous. The instrument used in the development of this Editor is UML(Unified Modeling Language), which is object-oriented methodology. The Authoring tool developed in this study is named FVU. The first page which is needed in class can be constructed by using VUEditor in FVU. Using VUEditor can get Instructional Syllabus exported into VUAuthor through Vector-transformation. Through this procedure, the size of image file comes to be reduced into forming low band width, which results in solving the problem of network traffic. Also, Instructor can create image, shape and text, and delete and correct errors or mistakes which make in the course of constructing materials for teaching. In conclusion, this VUEditor enables program designer to construct the first page, even without using such applied program as Image Tool and Power Point. This VUEditor makes instructor to make some contents for teaching easily.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.11
• /
• pp.33-43
• /
• 2002

This paper describes a design of cryptographic processor that implements the AES (Advanced Encryption Standard) block cipher algorithm "Rijndael". To achieve high throughput rate, a sub-pipeline stage is inserted into a round transformation block, resulting that two consecutive round functions are simultaneously operated. For area-efficient and low-power implementation, the round transformation block is designed to share the hardware resources for encryption and decryption. An efficient on-the-fly key scheduler is devised to supports the three master-key lengths of 128-b/192-b/256-b, and it generates round keys in the first sub-pipeline stage of each round processing. The Verilog-HDL model of the cryptoprocessor was verified using Xilinx FPGA board and test system. The core synthesized using 0.35-${\mu}m$ CMOS cell library consists of about 25,000 gates. Simulation results show that it has a throughput of about 520-Mbits/sec with 220-MHz clock frequency at 2.5-V supply.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.37-43
• /
• 2009

Streaming video service over wireless and mobile communication networks has received significant interests from both academia and industry recently. Specifically, mobile WiMAX (IEEE 802.16e) is capable of providing high data rate and flexible Quality of Service (QoS) mechanisms, supporting mobile streaming very attractive. However, we need to note that streaming videos can be partially deteriorated in their macroblocks and/or slices owing to errors on OFDMA subcarriers, as we consider that compressed video sequence is generally sensitive to the error-prone channel status of the wireless and mobile network. In this paper, we introduce an OFDMA subcarrier-adaptive mobile streaming server based on cross-layer design. This streaming server system is substantially efficient to reduce the deterioration of streaming video transferred on the subcarriers of low power strength without any modifications of the existing schedulers, packet ordering/reassembly, and subcarrier allocation strategies in the base station.