• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.858-864
• /
• 2001

This study was performed to investigate the effect of sodium lactate (SL, 60%) and a mixed fat replacer (FR) on the product quality and shelf-life effect of low-fat bologna sausage (LFBS) in a model system during refrigerated storage. Low-fat and regular-fat bologna sausages had pH values ranged from 6.15 to 6.30 and water activity values ranged from 0.95 to 0.96. LFBS had a moisture content of 74~76%, <2% fat and 14~15% protein, whereas regular-fat bologna had 60% moisture, 22% fat and approximately 12% protein in the final products. Expressible moisture (%) increased (p<0.05) in all bolognas, resulting in the soft texture, as the storage time (weeks) increased. LFBS manufactured with SL and a FR had lower (p<0.05) the cooking loss (%) and had higher (p<0.05) texture profile analysis (TPA) values than the regular-fat counterpart. As the sodium lactate level increased up to 5% in the formulation of LFBS, vacuum purge and TPA hardness values also increased (p<0.05), but thiobarbituric acid (TBA) values decreased (p<0.05). Total plate counts of LFBS were reduced (p<0.05) when the addition level of 60% SL solution was more than 3.3%. This result indicated that the increased level of SL (>3.3%) in the combination of a FR in the formulation of LFBS improved the product quality and did inhibit the total microbial growth of LFBS during storage, as compared to the control.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.577-582
• /
• 2002

Effects of the addition of single or blends of konjac flour (KF), carrageenan (CN), and soy protein isolate (SPI) into the sausage formulation were determined based on the physico-chemical and textural characteristics of low-fat comminuted sausage (LFS, fat <3%). LFSs had a pH range of 6.10 to 6.16, 77-79% moisture, <3% fat, and 13-15% protein contents, whereas regular-fat sausages (RFSs) had a pH value of 6.11, 62.5% moisture, 19.4% fat, and 11.9% protein. LFSs containing fat replacers were reduced (P<0.05) cooking loss (CL, %). KF alone or mixed with other hydrocolloids slightly improved the water-holding capacity, whereas CN increased (P<0.05) the gel strength, resulting in higher hardness values. Replacement of 6% lean meat with 1.5% SPI alone increased (P<0.05) yellowness (Hunter b value) and expressible moisture (EM, %). TPA values of KF+CN+SPI were the most similar to those of RFSs. These results indicated that triple addition of KF, CN and SPI at the ratio of 1 : 1 : 3 in LFS formulation improved functional properties, as compared to the low-fat control, and had textural characteristics most similar to those with RFSs.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.655-666
• /
• 2005

This study was performed to measure physicochemical and textural characteristics, and shelf-life effect of low-fat functional sausages(LFFSs) manufactured with sodium lactate(SL, 3.3%), lac pigment and various molecular weights(MWs) of chitosan (Low=1.5 kDa, Med=30-50 kDa and High=200 kDa) during storage at 15$^{\circ}C$ for 18 days. LFFSs had 73.7-76.0% moisture, lower than 3% fat and 14-15% protein, respectively. pH values were 6.05-6.44 and the control(150 ppm, $NaNO_2$) was the lowest among LFFSs (p<0.05). Increasing storage time decreased pH values, but no differences in pH values were observed up to 6 days of storage (p>0.05). LFFSs containing SL and low MW of chitosan improved water holding capacity (WHC) and different from those with SL and medium-MW chitosan. WHC was decreased with increased storage time and differences of WHC were observed from 18 days of storage. The addition of chitosan reduced both lightness and redness values, as compared to 150 ppm sodium nitrite(SN), and increased storage time decreased yellowness(p<0.05), especially at 12 days of storage. LFFSs with SL and medium-MW chitosan increased most textural properties compared to the control(p<0.05). The addition of SN of 150 ppm in LFFSs retarded microbial growth for E. coli 0157:H7, while those with SL tended to have an antimicrobial effect for Listeria monocytogenes(LM). The growth rate of LM was delayed by addition of various MW of chitosans in LFFSs, especially high MW chitosan, as compared to LFFSs containing SL alone. These results indicated that the functional, textural and antimicrobial effects of LFFSs were improved by addition SL and various MW of chitosan combinations. In addition, 0.05% lac pigment improved the cure color of LFFSs similar to those of 150 ppm SN.

• Food Science of Animal Resources
• /
• v.23 no.2
• /
• pp.128-136
• /
• 2003

This study was peformed to evaluate physico-chemical and textural properties, and shelf-life effect of low-fat functional sausages(LFFS) manufactured with sodium lactate(SL), lac color and various molecular weights of chitosans(low=1.5 kDa, medium=30∼40 kDa and high=200 kDa) during storage at 4$^{\circ}C$ for 8 weeks. LFFS had a pH range of 6.39∼6.50, 76∼78% moisture, <2% fat, 14∼15% protein. The combination of SL and low molecular weight(MW) of chitosan improved water holding capacity(WHC), however those of SL and medium MW of chitosan reduced WHC. Vacuum purge(VP) reduced with increased MW of chitosans during refrigerated storage. The addition of chitosans reduced the lightness and yellowness, but increased the redness values, which was comparable to the sodium nitrite concentration between 75 and 150 ppm. LFFS containing SL and medium MW of chitosan increased most texture profile analysis(TPA) values, as compared to controls with 75 and 150 ppm. The addition of SL in LFFS retarded the microbial growth for Listeria monocytogenes, however no synergistic effect with the addition of chitosans were observed. E coli O157:H7 and Salmonella typhimurium reduced during refrigerated storage, regardless of SL and chitosan treatments. Increased storage time increased values for VP, yellowness and textural properties. These results indicated that the combination of SL and various MW of chitosans affected the functional and textural properties, and inhibited the microbial growth for LM effectively. In addition, 0.5% lac color as a replacer for sodium nitrite improved the color development, resulting in similar hunter color values, which was comparable to the sodium nitrite concentration between 75 and 150 ppm.

• Food Science of Animal Resources
• /
• v.37 no.2
• /
• pp.162-167
• /
• 2017

Functional and nutritional soluble proteins can be recovered from surimi (and surimi-like material) processing wastewater, reducing environmental problems and the cost of an irresponsible waste disposal. Recovered proteins may be added back at a low percentage to surimi products. The aim of this work was to evaluate the effect of the addition of soluble recovered proteins (RP), obtained from mechanically separated chicken meat surimi-like material (MSCM-SLM) processing wastewater by acidic pH-shifting, on the composition and texture of RP-MSCM-SLM, with RP contents of 0, 10, 20 and 30% (w/w) in the mixture. For that, proximate composition and gel properties were evaluated. The fat content of the MSCM-SLM was significantly reduced to 11.98% and protein increased to 83.64% (dry basis) after three washing cycles. The addition of 30% RP in the MSCM-SLM significantly augmented the protein content to 93.45% and reduced fat content from to 2.78%. On the other hand, the addition of RP was responsible for a drastic decrease in texture parameters, reaching 252.36 g, 185.23 g.cm, and 6.97 N for breaking force, gel strength and cutting strength, respectively, when 30% of RP was included in the MSCM-SLM. It was concluded that the obtained intermediary product (RP-MSCM-SLM) is a good option to applications in processed meat products where high texture parameters are dispensable, e.g., emulsified inlaid frankfurter-type sausages, but high protein content and low fat content desired.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.05a
• /
• pp.236-238
• /
• 2004

Functional porperties such as CL, VP and EM did not affected by the addition of chitosans, however, level and MW of chitosans affected textural properties of LFSs, resulting in harder and springer texture of LFSs containing 0.3% MME chitosan as compared to others, Approximately 9 flavor compounds were different between RFC and LFS, and the addition of chitosans did not affected volatile compounds in the LFSs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.11
• /
• pp.1763-1775
• /
• 2019

Objective: The influence of konjac gel level on fermentation process and product qualities were assessed to evaluate the feasibility of using it as fat analog in Northeastern Thai fermented sausage (Sai Krok E-san). Methods: Five treatments of fermented sausages were formulated by replacing pork backfat with 0%, 7.5%, 22.5%, and 30% konjac gel. The changes in lactic acid bacteria (LAB) and important physicochemical properties of samples were assessed during 3 days of fermentation. After the end of fermentation at day 3, water activity ($a_w$), instrumental texture, color, microbial counts, and sensory evaluation were compared. The best product formulation using konjac for replacing pork back fat were selected and used to compare proximate composition and energy value with control sample (30% pork backfat). Results: An increase in konjac gel resulted in higher values of LAB, total acidity, and proteolysis index with lower pH and lipid oxidation during 3 days of product fermentation (p<0.05). It was noted that larger weight loss and product shrinkage during fermentation was observed with higher levels of konjac gel (p<0.05). The resulting sausage at day 3 with 15% to 30% konjac gel exhibited higher hardness, cohesiveness, gumminess, springiness, and chewiness than control (p<0.05). The external color of samples with 22.5% to 30% konjac gel were redder than others (p<0.05). Mold, Salmonella spp., Staphylococcus aureus, and Escherichia coli in all finished products were lower than detectable levels. Product with 15% konjac gel had the highest scores of sourness linking and overall acceptability (p<0.05). Conclusion: The product with 15% of konjac gel was the optimum formulation for replacing pork backfat. It had higher sensorial scores of sourness and overall acceptability than control with less negative impact on external appearance (product shrinkage) and weight loss. Moreover, it provided 46% fat reduction and 32% energy reduction than control.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.98-105
• /
• 2006

This study was performed to investigate the product characteristics of meat products sold in Korean markets and determine if these products meet the comsumer demands. The total nineteen meat produce were evaluated the physico-chemical, textural properties, and microbial counts of total bacteria and Enterobacteriaceae. pH values were ranged from 5.46 to 6.69, moisture $47.6{\sim}65.3%,\;fat\;14.2{\sim}34.7%,\;and\;9{\sim}20%$ and the pH values of ham products were higher than those of sausages. Purge loss(%) and expressible moisture(%) were ranged $2.40{\sim}7.44\;and\;6.10{\sim}21.2%$ respectively. Varied hunter color values (Lightness $59.6{\sim}75.7$, Redness $11.6{\sim}21.1$, Yellowness $2.30{\sim}l1.4$) were observed. Texture profile analysis values were observed and Frank A sausages made with chicken had highest fracturability, hardness and springiness, whereas loin ham and beershinken had highest cohesiveness, gumminess and chewiness. Most meat products had the total microbial counts of less than 3 log CFU/g and Enterbacteriaceae were not detected (< 2 log CFU/g) in this study. These data suggested that the meat products sold in Korean market were various and relatively safe. In addition, well-being meat products, such as low-fat, salt and containing functional ingredient, should be developed to meet the consumer needs these days.

• Korean journal of food and cookery science
• /
• v.31 no.4
• /
• pp.431-440
• /
• 2015

This study was performed to evaluate the quality characteristics of sausages after addition of lentil and Opuntia ficus-indica ethanol extract. Seven sausages were prepared as follows : F0 (control), F1 (5% lentils), F2 (5% lentils + 1% Opuntia ficus-indica), F3 (5% lentils + 3% Opuntia ficus-indica), F4(10% lentils), F5 (10% lentils + 1% Opuntia ficus-indica), and F6 (10% lentils + 3% Opuntia ficus-indica). Addition of lentils increase dietary fiber and starch in sausage while lowering fat content. Starch is used in manufacturing sausage to stabilize and increase viscosity. Opuntia ficus-indica contains dietary fibers and therefore addition of it to sausage increases dietary fiber, much like lentil addition. Lightness decreased and yellowness increased in all treatments. Redness was lowered by lentil addition but enhanced by addition of Opuntia ficus-indica. Redness in F3 and F5 were similar with control. But, F5 was more similar with control in all colors. Addition of lentil and Opuntia ficus-indica improved texture in hardness, springiness, gumminess, and chewiness. In sensory evaluation, color was lowered but taste was heightened by adding lentil and Opuntia ficus-indica extract. From results of this study, we could conclude that addition of mixture of lentil and Opuntia ficus-indica made sausage low in fat, with high in dietary fibers and starch. In addition, texture was increased and taste was better. F5 had the most similar color to control. We found out the optimal amounts of the two ingredients, lentil and Opuntia ficus- indica extract, were 10% and 1%, respectively.

• Journal of Animal Science and Technology
• /
• v.45 no.2
• /
• pp.283-296
• /
• 2003

Emulsion-type sausages were manufactured to investigate the effects of CLA-vegetable oils and CLA-lard on quality characteristics of emulsion-type sausage. Each treatments replaced pork back fat with CLA-corn oil (CLA-CO), CLA-safflower seed oil (CLA-SSO) and CLA-lard (CLA-LD) were stored during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. The changes in physico-chemical properties, texture, thiobarbituric acid reactive substances (TBARS), fatty acid composition and CLA content of each treatments were measured during 1, 7, 14, 21 and 28 days at 4$^{\circ}C$. During storage, pH of control showed higher pH value than that of CLA-vegetable and CLA-lard treatments. The pH values of all treatments was significantly low at storage 14 days (p<0.05). The color L* and a*-value of all the treatments was not significantly changed with the storage periods. Color b*-value of CLA-treatments was higher than that of control during the storage period. Fatty acids composition was changed by addition of CLA-vegetable oils and CLA-lard. All kinds of fatty acids composition were decreased with CLA replacements than that of the control. Whereas linolenic acid content extremely increased by replacement of CLA-vegetable. CLA content of CLA-treatments was extremely increased than that of the control. The cohesiveness, springness, gumminess and brittleness of CLA-LD treatment was significantly higher (P<0.05) than that of the other treatments. The TBARS value of all treatments were significantly increased (P<0.05) as the storage period was passed. TBARS of sausage products containing CLA-CO was the lowest. Summing up the a forementioned results, emulsion-type sausage manufacturing with CLA-vegetable oil and CLA-lard was not affected in physico-chemical properties and texture characteristics. Also, it may be assumed that the high quality sausage can be manufactured with the extent of storage period and CLA accumulation.