• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1310-1319
• /
• 2005

This experiment was conducted to determine the effects of cage density (CD) and humate supplementation (HS) on laying performance, metabolic profile, and egg quality during the peak production period in hens. Lohman layers (n = 180, 46 wks of age) were blocked according to the location of cages and then allocated randomly to two levels of CD (4 or 6 hens per cage or 540 vs. 360 $cm^2$/hen) and three levels of HS (0, 0.15, and 0.30%). Egg production (EP) and feed consumption (FC) were measured daily; egg weight was measured bi-weekly; and BW was measured before and after the experiment. Blood and additional egg samples were obtained at the end of the experiment for determination of metabolic profile and egg quality. The data were analyzed using two-way ANOVA as repeated measures. Except for FC, CD did not affect laying performance parameters. Hens placed in high-density cages had lower FC than hens placed in normal-density cages. Increasing HS level linearly increased FC, EP, and feed conversion ratio (FCR). There was a CD by HS interaction effect on FC and EP. Hens placed in high-density cages had greater serum glucose, total protein, albumin, globulin, Ca, and P concentrations and tended to have greater serum corticosterone concentration than hens placed in normaldensity cages. Increasing HS level linearly increased serum glucose, total protein, albumin, globulin, creatine, and Ca concentrations and linearly decreased serum triglyceride and very low-density lipoprotein concentrations. There was a CD by HS interaction effect on serum glucose and albumin concentrations. There were no alterations in egg quality parameters in response to increasing CD. Albumen index and Haugh unit decreased linearly and other egg quality parameters did not change as HS level increased. In conclusion, increased caging density adversely affected metabolic profile, despite insignificantly deteriorating laying performance. Moreover, benefits from humate supplementation seem to be more noteworthy for hens housed in stressing conditions than for hens housed in standard conditions.

• Journal of Korean Medicine Rehabilitation
• /
• v.32 no.2
• /
• pp.19-36
• /
• 2022

Objectives This study is to investigate the effects and mechanisms of Imyo-san (IMS) on the obese mice model induced by high-fat diet. Methods Antioxidative capacity was measured by in vitro method. C57BL/6 mice were randomly assigned into 5 groups (n=7). Normal group was fed general diet (Normal). The other 4 groups were fed high fat diet (HFD) with water (Control), with Garcinia gummi-gutta (GG, Garcinia gummi-gutta 200 mg/kg), with low-dose IMS (IMSL, Imyo-san 0.54 g/kg) and with high-dose IMS (IMSH, Imyo-san 1.08 g/kg). Results IMS showed high radical scavenging activity. After 6 week experiment, body weight, food intake, food efficiency ratio (FER), epididymal fat and liver weight, triglyceride (TG), total cholesterol (TC), high density lipoprotein (HDL) cholesterol, low density lipoprotein (LDL) cholesterol, very low density lipoprotein (VLDL) cholesterol, sterol regulatory element-binding protein-1 (SREBP-1), phospho-acetyl-CoA carboxylase (p-ACC), fatty acid synthase (FAS), stearoyl-CoA desaturase-1 (SCD-1), SREBP-2, 3-hydroxy-3-methylglutaryl-CoA reductase (HMGCR), phospho-liver kinase B1 (p-LKB1), phospho-AMP-activated protein kinase (p-AMPK), peroxisome proliferator-activated receptor 𝛼 (PPAR𝛼), peroxisome proliferator-activated receptor 𝛾 coactivator-1𝛼 (PGC-1𝛼), uncoupling protein-2 (UCP-2), carnitine palmitoyltransferase 1A (CPT-1A), and histology of liver and epididymal fat were measured and analysed. Body weight gain, FER, liver and epididymal fat weight of IMS groups were significantly decreased. There were significant improvements in blood lipids with less TG, TC, LDL-cholesterol, VLDL-cholesterol and more HDL-cholesterol. Proteins associated with lipid synthesis (SREBP-1, p-ACC, FAS, SCD-1) and cholesterol (SREBP-2, HMGCR) was improved. Factors regulating lipid synthesis and lipid catabolism (p-LKBI, p-AMPK, PPARα, PGC-1α, UCP-2, CPT-1A) were increased. In histological examinations, IMS group had smaller fat droplets than control group. All results increased depending on concentration. Conclusions It can be suggested that IMS has anti-obesity effects with improving lipid metabolism.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.483-487
• /
• 2010

To fabricate $TiO_2$ nanoparticle-based dye sensitized solar cells (DSSCs) at a low-temperature, DSSCs were fabricated using hydropolymer and ZnO nanoparticles composites for the electron transport layer around a low-temperature ($200^{\circ}C$). ZnO nanoparticle with 20 nm and 60 nm diameter were used and Pt was deposited as a counter electrode on ITO/glass using an RF magnetron sputtering. We investigate the effect of ZnO nanoparticle concentration in hydropolymer and ZnO nanoparticle solution on the photoconversion performance of the low temperature fabricated ($200^{\circ}C$) DSSCs. Using cis-bis(isothiocyanato)bis(2,20 bipyridy1-4,40 dicarboxylato) ruthenium (II) bis-tetrabutylammonium (N719) dye as a sensitizer, the corresponding device performance and photo-physical characteristics are investigated through conventional physical characterization techniques. The effect of thickness of the ZnO photoelectrode and the morphology of the ZnO nanoparticles with the variations of hydropolymer to ZnO ratio on the photoconversion performance are also investigated. The morphology of the ZnO layer after sintering was examined using a field emission scanning electron microscope (FE-SEM). 60 nm ZnO nanoparticle DSSCs showed an incident photon-to-current conversion efficiency (IPCE) value of about 7% higher than that of 20 nm ZnO nanoparticle DSSCs. The maximum parameters of the short circuit current density ($J_{sc}$), the open circuit potential ($V_{oc}$), fill factor (ff), and efficiency ($\eta$) in the 60 nm ZnO nanoparticle-based DSSC devices were 4.93 mA/$cm^2$, 0.56V, 0.40, and 1.12%, respectively.

• Proceedings of the Korean Society of Tobacco Science Conference
• /
• 1997.10a
• /
• pp.91-113
• /
• 1997

One mg tar cigarettes represent a growing segment of the market, in various parts of the world but specially in the Far East. Cigarette design of ultra low tar cigarettes is not easy to manage: a simple extension of the techniques used in the design of the low tar segment will usually lead to tasteless cigarettes. A detailed analysis of the design of commercial ultra low tar cigarettes in different countries shows that no 《dominant design》 has yet been adopted. Blend composition, blend density, filter design, degree of filter ventilation all vary in a large range from cigarette brand to cigarette brand, and will influence the puff number, the tar concentration in each puff and ultimately the taste. We will report and comment on the detailed analysis of 17 commercial brands of ultra low tar cigarettes. We will then review the specific influence of tobacco chemical composition, introduction of reconstituted tobacco, influence of cigarette paper characteristics, selection of filter ventilation components on the burn characteristics and tar delivery; to conclude that the commercial success of an ultra low tar cigarette is linked to a very delicate balance between this techniques and... good marking of course!

• Korean journal of applied entomology
• /
• v.43 no.1
• /
• pp.71-79
• /
• 2004

Toxicities of 42 pesticides (13 acaricides, 13 insecticides, 13 fungicides and 3 adjuvants) commonly used to control rose insect, mite, and disease pests were evaluated to the two-spotted spider mite, Tetranychus urticae egg and adult, and its predator Phytoseiulus persimilis egg, nymph and adult at the recommended concentration. The effect of density suppression of T urticae by predatory mite and pesticide mixture on the rose in the greenhouses was also investigated. Among 13 acaricides tested, acequinocyl, bifenazate, fenbutatin oxide and spirodiclofen showed much less toxicity to P. persimilis than to T urticae. Among insecticides, acetamiprid, imidacloprid, spinosad, thiamethoxam and acetamiprid＋etofenprox showed low toxicity to P. persimilis. and T ruticae. Among 13 fungicides, azoxystrobin, kresoxim-methyl, myclobutanil, nuarimol, triadimefon, triflumizole and oxadixyl＋mancozeb had a negligible effect on P. persimilis and T. urticae. Among three adjuvants, cover and siloxane expressed high toxicity, while spreader showed very low toxicity to P. Persimilis. In the greenhouses experiments, the density of T urticae before treatment was 65.3 mites per leaf. However, their density after release about 30 predatory mites per rose abruptly decreased from 3.8 mites at 11th day to zero mite at 20th day. During survey periods, four treatments of fungicides (kresoxim-methyl, myclobutanil, nuarimol, triflumizole) for the control of Sphaerotheca pannosa and one treatment of insecticide (spinosad) the control of Frankliniella occidentalis were applied, and these treatments had no the pesticides had no effect on the predatory mite density. It may be suggested from these results that four acaricides, five insecticides, seven fungicides, and one adjuvant could be incorporated into the integrated T. urticae management system with P. persimilis on rose cultivation.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.400-405
• /
• 2016

Ferric oxide (${\alpha}-Fe_2O_3$, hematite) is an n-type semiconductor; due to its narrow band gap ($E_g=2.1eV$), it is a highly attractive and desirable material for use in solar hydrogenation by water oxidation. However, the actual conversion efficiency achieved with $Fe_2O_3$ is considerably lower than the theoretical values because the considerably short diffusion length (2-4 nm) of holes in $Fe_2O_3$ induces excessive charge recombination and low absorption. This is a significant hurdle that must be overcome in order to obtain high solar-to-hydrogen conversion efficiency. In consideration of this, it is thought that elemental doping, which may make it possible to enhance the charge transfer at the interface, will have a marked effect in terms of improving the photoactivities of ${\alpha}-Fe_2O_3$ photoanodes. Herein, we report on the synthesis by pulsed electrodeposition of ${\alpha}-Fe_2O_3$-based anodes; we also report on the resulting photoelectrochemical (PEC) properties. We attempted Ti-doping to enhance the PEC properties of ${\alpha}-Fe_2O_3$ anodes. It is revealed that the photocurrent density of a bare ${\alpha}-Fe_2O_3$ anode can be dramatically changed by controlling the condition of the electrodeposition and the concentration of $TiCl_3$. Under optimum conditions, a modified ${\alpha}-Fe_2O_3$ anode exhibits a maximum photocurrent density of $0.4mA/cm^2$ at 1.23 V vs. reversible hydrogen electrode (RHE) under 1.5 G simulated sunlight illumination; this photocurrent density value is about 3 times greater than that of unmodified ${\alpha}-Fe_2O_3$ anodes.

• Nutrition Research and Practice
• /
• v.6 no.3
• /
• pp.195-200
• /
• 2012

The purpose of this study was to investigate the effects of ${\alpha}$-lipoic acid on body weight and lipid profiles in Sprague-Dawley rats fed a high fat diet (HFD). After 4 weeks of feeding, rats on the HFD were divided into three groups by randomized block design; the first group received the high-fat-diet (n = 10), and the second group received the HFD administered with 0.25% ${\alpha}$-lipoic acid (0.25LA), and the third group received the high-fat diet with 0.5% ${\alpha}$-lipoic acid (0.5LA). The high fat diet with ${\alpha}$-lipoic acid supplemented groups had significantly inhibited body weight gain, compared to that in the HFD group (P < 0.05). Organ weights of rats were also significantly reduced in liver, kidney, spleen, and visible fat tissues in rats supplemented with ${\alpha}$-lipoic acid (P < 0.05). Significant differences in plasma lipid profiles, such as total lipids, total cholesterol, triglycerides, low-density lipoprotein, and high-density lipoprotein, were observed between the HFD and 0.5LA groups. The atherogenic index and the plasma high density lipoprotein-cholesterol/total cholesterol ratio improved significantly with ${\alpha}$-lipoic acid supplementation in a dose-dependent manner (P < 0.05). Total hepatic cholesterol and total lipid concentration decreased significantly in high fat fed rats supplemented with ${\alpha}$-lipoic acid in a dose-dependent manner (P < 0.05), whereas liver triglyceride content was not affected. In conclusion, ${\alpha}$-lipoic acid supplementation had a positive effect on weight gain and plasma and liver lipid profiles in rats.

• Journal of Surface Science and Engineering
• /
• v.28 no.4
• /
• pp.207-218
• /
• 1995

Tungsten(W) metal has excellent properties in heat-resistance, corrison-resistance and impact-resistance but W-Metal is hard to sinter because higher than $2,000^{\circ}C$ is required to sinter W-powder. Con-sequently, a deposit technique of Nikel Phosphorus(NiP) on W-powber by the liquid reduction precipitation method was performed. Sintering temperature of the resulting W-NiP composite was lowered around to $1,000^{\circ}C$, and the mechanical properties of the sintered body was studied. The most suitable conditions for NiP thin film deposit on W-Powder by the liquid reduction precipitation method, which are composition, concentration, pH and temperature of the liquid reduction solution, were considered. The activated sintering was carried out in a reducing condition furnace. Components and properties of the sintered body were investigated by the density and the hardness measurements, X- ray diffraction analysis, and microscopic photographs of the surface. Quantity of NiP thin film on W-powder could be varied by the change of the liquid reduction solution composition. The sintering temperature of W-NiP composite powder is lowered to $950^{\circ}C$ from $2,000^{\circ}C$ and the hardness is increased (ca. 720 Hv). Large shrinkage could be observed since density was increased from 5.5 to 11.0 g/$cm^2$ which 86.2% of theoretical density. W metal and $Ni_3P$ crystal were detected through X-ray diffraction on the sintered body. Perfectly activated sintering was observed by microscopic photographs.

• Journal of Surface Science and Engineering
• /
• v.48 no.6
• /
• pp.253-259
• /
• 2015

The test equipment becomes more important with the development of semiconductor industry. MEMS probe is an important testing component to detect the defects from the generated electric signal when it contacts the metal pad of semiconductor devices. Ni-Pd alloy has been paid attention to as a candidate of MEMS probe material because of its high surface hardness and relatively low resistivity. In this study, electroplated Ni-Pd alloy has been prepared by using ethylene diamine as a complexing agent. Solid solution alloy coating could be formed when concentration of palladium chloride and current density were in the ranges of 1~5 mM and $0.2{\sim}1.5A/dm^2$, respectively. The increase of current density brought about an decrease in palladium content, which made both of lattice parameter and grain size smaller. As a result of grain refinement, high hardness could be obtained. However, surface cracking was observed due to residual stress when the current density was above $1.3A/dm^2$. When effects of heat treatment temperature on hardness and sheet resistance were investigated, the accompanied grain growth decreased both of them. The decrease of hardness remained stable at a temperature of $200^{\circ}C$. The sheet resistance was drastically reduced at $100^{\circ}C$. After that, it was found to become constant.

• Korean Journal of Veterinary Service
• /
• v.15 no.1
• /
• pp.32-45
• /
• 1992

In order to establish and enzyme-linked immunosorbent assay to ILTV, field virus strain of ILTV was propagated in chorioallantoic membrane of the embryonated eggs. purified and used as antigen. The antisera selected from the field samples and immunized chickens based on serum neutralization test were used as the standard positive and negative sera in all tests. It was found that optimal antigen concentration was $2{\mu}g$ of protein per well and a 1 : 100 dilution of standard serum showed low background optical density with negative serum and high P/N values of positive sera. A 1 : 500 dilution of the rabbit anti-chicken IgG peroxidase conjugate produced a high P/N values and thirty minutes was chosen as suitable time to read the optical density of the enzyme substrate reaction and optical density was consistent during the 16 hours after stopper was treated. When coated antigen was kept on microplate for varying time up to 16 hours at $4^{\circ}C$ or $37^{\circ}C,$ no significant difference was observed between the treatment. The coated antigen could be kept without change of antigenicity for at least one month at $-70^{\circ}C,\; -20^{\circ}C,\; 4^{\circ}C$ and room temperature. When blocking buffer contanining bovine serum albumin was mixed directly with conjugate and serum at 10% level induced higher P/N values compared to blocking antigen coated microplate with the same blocking buffer. The coefficience of correlation between ELISA and SN test was 0.577. When antibody response of chickens, vaccinated with ILTV, was examined by ELISA and SN test, antibody rising and decay pattern between the two test was similar until 11 weeks of age. However 12 weeks onward antibody titer checked on by SN test was slightly lower than that tested by ELISA.