• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.893-895
• /
• 2009

In this paper, we described the unique and novel method to prepare two kinds of electro-active particles, black and white particles with different polarity. The surface of the particles was characterized to be uniform and clean by adopting spray dryer as a tool for genesis of particles; neither surfactants nor high dielectric medium like water was employed during particle preparation step. The other purpose of this study is to investigate the factors that contribute high driving voltage of particlebased display like QR-LPD. We extracted parameters interaction between particle and electrode, and between oppositely charged particles. Here we reported an excellent behavior of particle-based display that showed low operating voltage, high contrast ratio as high as 8:1 without scarification of quick response time. By optimizing the particle size, charge per mass, selection of external additive sets, a lower driving voltage as low as 40V for the particles with $10{\mu}m$ volume average diameter was obtained.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.79-86
• /
• 2004

This paper has presented to the design results of the analog and digital signal processor for the 2nd generation thermal imaging system using $480\times6$ infrared focal plane array In order to correct non-uniformities of detector arrays, we have developed the 2-point correction method using the thermo electric cooler. Additionally, to enhance the image of low contrast and improve the detection capability, we developed the new technique of histogram processing being suitable for the characteristics of contrast distribution of thermal imagery. Through these image processing techniques, we obtained a high qualify thermal image and acquired good result.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.38-41
• /
• 2002

Mammography is considered the single most important diagnostic tool in the early detection of breast cancer. Today's dedicated mammographic equipment, specially designed x-ray screen/film combinations, coupled with controlled film processing, produces excellent image quality and can detect very low contrast small lesions. In mammography, it is most important to produce consistent high-contrast, high-resolution images at the lowest radiation dose consistent with high image quality. Some of the major technical development milestones that have let to today's high quality in mammographic imaging are reviewed. Both the American College of Radiology Mammography Accreditation Program and the Mammography Quality Standards Act have significant impact on the improvement of the technical quality of mammographic images in the United States and worldwide. A most recent development in digital mammography has opened up avenues for improving diagnosis.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.159-164
• /
• 1999

Homogeneous but distinct visual objects having low-contrast boundaries are usually merged in most of the segmentation algorithms. To alleviate this problem, an efficient image segmentation algorithm based on a bottom-up approach is proposed by using spatial domain information only. For initial image segmentation, we adopt an efficient marker extraction algorithm conforming to the human visual system. Then, two region-merging algorithms are successively applied so that homogeneous visual objects can be represented as simple as possible without destroying low-contrast real boundaries among them. The resultant segmentation describes homogeneous visual objects with few regions while preserving semantic object shapes well. Finally, a size-based region decision procedure may be applied to represent complex visual objects simpler, if their precise semantic contents are not necessary. Experimental results show that the proposed image segmentation algorithm represents homogeneous visual objects with a few regions and describes complex visual objects with a marginal number of regions with well-preserved semantic object shapes.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.11
• /
• pp.152-165
• /
• 1998

The contour coding usually occupies the biggest part in the encoded bitstream, which causes the bottleneck problem of a region-based coding scheme. In this paper, new adaptive contour coding technique is proposed for the segmentation-based image coding. By adaptive contour coding considering contrast of neighbor regions in the proposed method, the overall bitrate can be significantly reduced without loss of the subjective image quality. After segmentation using watershed algorithm to the image, the contour segments are classified according to the contrast of the adjacent regions. Then, the contour segments between classified low contrast regions are highly compressed using morphological low pass filtering. The needed bits for encoding the contour information is reduced without loss of subjective image quality in the experiment.

• Journal of radiological science and technology
• /
• v.42 no.1
• /
• pp.39-46
• /
• 2019

This study conducted a comparative analysis of differences between cartesian trajectory in a linear rectangular coordinate system and MultiVane trajectory in a nonlinear rectangular coordinate system axial T1 and axial T2 images using an American College of Radiology(ACR) phantom. The phantom was placed at the center of the head coil and the top-to-bottom and left-to-right levels were adjusted by using a level. The experiment was performed according to the Phantom Test Guidance provided by the ACR, and sagittal localizer images were obtained. As shown in Figure 2, slices # 1 and # 11 were scanned after placing them at the center of a $45^{\circ}$ wedge shape, and a total of 11 slices were obtained. According to the evaluation results, the image intensity uniformity(IIU) was 93.34% for the cartesian trajectory, and 93.19% for the MultiVane trajectory, both of which fall under the normal range in the axial T1 image. The IIU for the cartesian trajectory was 0.15% higher than that for the MultiVane trajectory. In axial T2, the IIU was 96.44% for the cartesian trajectory, and 95.97% for the MultiVane trajectory, which fall under the normal range. The IIU for the cartesian trajectory was by 0.47% higher than that for the MultiVane trajectory. As a result, the cartesian technique was superior to the MultiVane technique in terms of the high-contrast spatial resolution, image intensity uniformity, and low-contrast object detectability.

• Korean Institute of Interior Design Journal
• /
• no.7
• /
• pp.31-37
• /
• 1996

The purpose of this study is to grasp the characteristics by image type in interior color. This experiment is carried out by the evaluation method of color simulation with the color image processor. And the result of this experimental evaluation is analyzed quantitatively by HAYASI 1 Program. The results of this analysis are as follows : 1) In casual and clear images, the most main colors are GY, PB, Y , and N, Casual image has high chroma and the most arrangement of colors is hue-contrast or contrast -harmony with white. Also the main colors of clear image are in identical or similar harmony with the hues of floor. 2) In romantic, elegant, pretty, and gorgeous images, the most main colors are GY, RP, R , YR and Y and the most arrangement of colors is identical or similar harmony. The romantic image of pastel tone is wholly lighter than the pretty image of bright tone. And elegant image is lower in chroma than romantic images, so generally dark. Also gorgeous image is the vivid tone with high chroma. 3) In chic and modern images, the main colors are the hues of B, PB, high value and low chroma with bright tone. Also, the main colors are in identical or similar harmony with the hues of floor : BG , B, PB and P. 4) In natural and semiclassic images, the main color is the warm color of Y, YR and the most arrangement of colors is identical or similar harmony. Also Semiclassic images is the dull tone with middle value and middle chroma and darker tone than natural image. 5) In dynamic image, the main color is the hue of N, Y, PB and GY and most of color is high chroma. And the most arrangement of colors is value-contrast.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.99-100
• /
• 2015

Digital image blur occurs due to various environmental conditions at the time of shooting. Blur produces the low-frequency component in the image. This problem worsens the quality of the digital image. To address this issue, contrast improvement methods has been widely studied. 2D filter to enhance the edges is a simple structure with a fast processing speed. However, the sensitivity of the human visual system is different depending on the surrounding brightness locally. Thus, in this paper, we proposed feature-based contrast enhancement method for the digital image using 2D filter to enhance the edges and JND(Just Noticeable Difference) according to the surrounding brightness. We confirmed the result image of proposed method and identified that the contrast is improved.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.4
• /
• pp.30-40
• /
• 1999

The possibility of the characterization of sheet formation by image analysis with transmitted light was evaluated. Specific perimenter, average perimeter and variation could not be used to predict the sheet formation because there were no corrleation. Although image analysis method still have a lot of problems , it was found that the contrast intensity obtained by image analysis with transmitted light can be used to predict the sheet formation. In the case of highly filled sheet, the intensity of transmitted light was too low to characterize the sheet formation . However, it was possible to characterize the formation of unfilled heavy weight paper($\leq$200g/㎡).

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1662-1665
• /
• 2004

A real-time joint transform correlator by using JPEG-compressed reference images is proposed as practical solution to storage problem and improvement of processing time of automatic target recognition system [1]. Effects of compression on recognition performance of join transform correlator are quantitatively investigated under situations where the target is suffered from noise and has contrast difference with respect to the reference. Two images with different spatial-frequency contents and contrast were used as the test scenes. The simulation results show that, the recognition performance of joint transform correlator by using the compressed reference images with high spatial-frequency components is more sensitive to noise and contrast difference than the low spatial-frequency image.