• 제목/요약/키워드: Low-Swing Technology

검색결과 104건 처리시간 0.025초

Low-Swing 기술을 이용한 저 전력 병렬 곱셈기 설계 (Design of a Low-Power Parallel Multiplier Using Low-Swing Technique)

  • 강장희;김정범
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
    • /
    • pp.79-82
    • /
    • 2003
  • This paper describes a new low-swing inverter for low power consumption. To reduce a power consumption, an output voltage swing is in the range from 0 to $V_{ref}-V_{TH}$, where $V_{ref}=V_{DD}-nV_{TH}$. This can be done by the inverter structure that allow a full swing or a swing on its input terminal without leakage current. Using this low-swing voltage technology, we propose a low-power $4\times4$ bit parallel multiplier. The proposed circuits are simulated with HSPICE under $0.35{\mu}m$ CMOS standard technology. Compare to the previous works, this circuit can reduce the power consumption rate of 11.2% and the power-delay product of 10.3%.

  • PDF

저 전압 스윙 기술을 이용한 저 전력 병렬 곱셈기 설계 (Design of a Low-Power Parallel Multiplier Using Low-Swing Technique)

  • 김정범
    • 정보처리학회논문지A
    • /
    • 제14A권3호
    • /
    • pp.147-150
    • /
    • 2007
  • 본 논문에서는 작은 점유면적과 저 전력 소모 특성을 갖도록 CPL(Complementary Pass-Transistor Logic) 논리구조의 전가산기에 저 전압 스윙 기술을 적용하여 16$\times$16 비트 병렬 곱셈기를 설계하였다. 회로구성상 CPL 논리구조는 CMOS 논리구조에 비해 NMOS 트랜지스터만을 사용하기 때문에 작은 면적을 소비한다. 저 전압 스윙 기술은 회로에 공급되는 전압보다 낮은 전압 레벨에서 출력 동작을 하여 전력 소모를 감소시키는 기술이다. 본 논문에서는 전가산기의 출력 단에 사용되는 인버터에 저 전압 스윙 기술을 적용하여 저 전력 소모 특성을 갖는 16$\times$16 비트 병렬 곱셈기를 설계하였다 설계한 회로는 17.3%의 전력 소모 감소와 16.5%의 전력소모와 지연시간의 곱(Power Delay) 감소가 이루어졌다.

에탄올-n-헵탄 공비 혼합물의 분리를 위한 압력변환 증류공정 연구 (A Study on the Pressure-Swing Distillation of Ethanol-n-Heptane Azeotrope)

  • 노상균
    • 청정기술
    • /
    • 제21권4호
    • /
    • pp.217-223
    • /
    • 2015
  • 본 연구에서는 에탄올-n-헵탄 이성분계 공비 혼합물의 분리를 위해 압력변환 증류공정(pressure-swing distillation, PSD)을 사용하여 전산모사 및 공정 최적화를 진행하였다. 저압-고압 컬럼 배열과 고압-저압 컬럼 배열을 통해 고순도 에탄올과 고순도 n-헵탄을 얻기 위한 압력변환 증류공정을 수행하였다. 전산모사 결과, 저압-고압 컬럼 배열 공정보다 고압-저압 컬럼 배열 공정을 사용할 경우 heat duty 값이 약 5.8% 정도 감소되어 에너지 소모량 면에서 더 경제적임을 확인할 수 있었다.

고속 저전압 스윙 온 칩 버스 (High Speed And Low Voltage Swing On-Chip BUS)

  • 양병도;김이섭
    • 대한전자공학회논문지SD
    • /
    • 제39권2호
    • /
    • pp.56-62
    • /
    • 2002
  • 문턱전압 스윙 드라이버(threshold voltage swing driver)와 이중 감지 증폭기 리시버(dual sense amplifier receiver)를 가진 새로군 고속 저전압 스윙 온 칩 버스 (on-chip BUS)를 제안하였다. 문턱전압 스윙 드라이버는 버스에서의 전압상승 시간을 CMOS 인버터(inverter) 드라이버에서의 약 30% 이내로 줄여주고, 이중 감지 증폭기 리시버는 감지 증폭기 리시버를 사용하는 기존의 저전압 스윙 버스들의 데이터 전송량을 두 배 향상시켜 준다. 문턱전압 스윙 드라이버와 이중 감지 증폭기 리시버를 모두 사용할 경우, 온 칩 버스에서 사용하는 기존의 CMOS 인버터와 비교하여 제안된 방식은 약 60%의 속도 증가와 75%의 소모전력 감소를 얻는다.

New Method to Quantify the Operation Condition for Zone 3 Impedance Relays during Low-Frequency Power Swings

  • Li, Shenghu
    • Journal of Electrical Engineering and Technology
    • /
    • 제3권1호
    • /
    • pp.29-35
    • /
    • 2008
  • With long time setting, zone 3 impedance relays are considered insensitive to power swings, and their operation condition during power swings is seldom analyzed. Instead of ti me-consuming simulation to the swing loci, their operation condition is directly quantified by polynominal functions in this paper to find the critical swing angle and frequency for relay operation under different relay settings and system parameters. It is found: (1) the swing loci are more densely populated inside than outside of the protection region, which corresponds to long residence time and possible relay operations; (2) the relays may be sensitive to load encroac hments and stable power swings with different relay settings and system parameters; (3) the critical swing frequency may be in the range of low-frequency power swings.

전력소모 감소를 위한 저 전압 BUS 구동과 인터페이스 분석 (Low Voltage Swing BUS Driver and Interface Analysis for Low Power Consumption)

  • 이호석;김이섭
    • 전자공학회논문지C
    • /
    • 제36C권7호
    • /
    • pp.10-16
    • /
    • 1999
  • 본 논문은 FCSR(Freedback Control Swing voltage Reduction) 방식을 이용하여 bus 구동전압을 수백 mV이내로 줄일 수 있는 구동기에 대한 내용을 다루고 있다. 이는 MDL 구조와 같이 대용량, 대단위 bus에서의 전력소모를 줄이기 위한 연구로 FCSR은 dual-line bus와 bus precharging을 기본구조로 채택하고 있다. Bus 환경이 변화함에 따라 일정한 구동전압을 유지하기 위하여 구동기의 크기를 자동적으로 조절할 수 있도록 구동기와 bus를 모델링 하였고 또한 odd mode로 동작하는 이웃하는 선간의 커플링 영향을 평행 전류원으로 모델링하여 선간간섭(crosstalk) 영향을 분석하였다. 현대 0.8um 공정으로 제작된 chip은 bus를 600mV로 구동하도록 설계되었으며 테스트결과 3.3V에서 70Mhz로 동작 가능하다. Hspice 시뮬레이션으로 FCSR은 3.3V에서 250Mhz의 동작이 가능하다.

  • PDF

휘발성 유기화합물 제거를 위한 저온 vacuum swing adsorption 공정의 실용화 연구 (Practical Study of Low-temperature Vacuum Swing Adsorption Process for VOCs Removal)

  • 전미진;박서현;이형돈;전용우
    • 공업화학
    • /
    • 제28권3호
    • /
    • pp.332-338
    • /
    • 2017
  • 본 연구에서는 주요한 휘발성 유기화합물의 발생원인 도장공장 중에서 중소규모의 공장에 적용 가능한 저온 vacuum swing adsorption (VSA) 기술에 대하여 연구하였다. 저온 VSA 기술이란 기존의 thermal swing adsorption (TSA)의 단점을 보완하기 위하여 저온($60{\sim}90^{\circ}C$)에서 감압하여 흡착질을 탈착하는 방식이다. 국내에서 시판되고 있는 상용 활성탄을 이용하여 대표적인 VOCs인 톨루엔의 흡 탈착 특성을 랩(Lab)규모로 실험하였으며, 이를 바탕으로 $30m^3min^{-1}$ 규모의 VSA 시스템을 설계하여 실제 도장 공장에 적용하여 VSA 시스템의 현장적용 가능성에 대하여 평가하였다. 랩 규모 실험 결과, 2 mm 펠렛형 활성탄은 4 mm 펠렛형 활성탄보다 높은 톨루엔 흡착능을 나타내었으며, 이에 파일럿 규모의 VSA의 충진 활성탄으로 사용되었다. 탈착 실험에서는 $80{\sim}90^{\circ}C$의 온도와 100 torr의 압력이 최적 조건으로 결정되었다. 랩 규모 실험 결과를 바탕으로 파일럿 규모 VSA 시스템을 설계하였으며 실제 도장 공장에 현장 적용하여 95회 흡 탈착 실험을 반복 수행하였다. 수행 결과, 연속 흡 탈착 반복실험 후, 도정공장에서 배출된 VOCs를 98% 이상 효과적으로 제거 가능함을 확인하였으며 VSA 시스템의 안정적인 현장 적용이 가능함을 검증하였다.

A Reduced-Swing Voltage-Mode Driver for Low-Power Multi-Gb/s Transmitters

  • Song, Hee-Soo;Kim, Su-Hwan;Jeong, Deog-Kyoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제9권2호
    • /
    • pp.104-109
    • /
    • 2009
  • At a lower supply voltage, voltage-mode drivers draw less current than current-mode drivers. In this paper, we newly propose a voltage-mode driver with an additional current path that reduces the output voltage swing without the need for complicated additional circuitry, compared to conventional voltage-mode drivers. The prototype driver is fabriccated in a 0.13-$^{\mu}m$ CMOS technology and used to transmit data streams at the rate of 2.5 Gb/s. Deemphasis is also implemented for the compensation of channel attenuation. With a 1.2-V supply, it dissipates 8.0 mA for a 400-mV output voltage swing.

트위스티드 다이오드 연결 구조를 이용한 저전압 스윙 도미노 로직 (A New Small-Swing Domino Logic based on Twisted Diode Connections)

  • 안상윤;김석만;장영조;조경록
    • 전자공학회논문지
    • /
    • 제51권4호
    • /
    • pp.42-48
    • /
    • 2014
  • 본 논문에서는, 트위스티드 연결구조를 이용한 새로운 저전압 스윙 도미노 로직 회로를 제안한다. 제안된 회로의 출력스윙 범위는 트위스티드 트랜지스터의 사이즈와 출력 캐패시턴스의 크기에 따라 조절가능하다. 제안된 회로를 적용한 리플캐리덧셈기(Ripple Carry Adder)는 도미노 CMOS로직에 비해 전력소비는 37%감소했고 전력 지연 곱(power-delay product)은 43%감소했다.

Effect of vacuum regeneration of activated carbon on volatile organic compound adsorption

  • Pak, Seo-Hyun;Jeon, Yong-Woo
    • Environmental Engineering Research
    • /
    • 제22권2호
    • /
    • pp.169-174
    • /
    • 2017
  • Vacuum swing adsorption (VSA) is a promising treatment method for volatile organic compounds (VOCs). This study focuses on a VSA process for regenerating activated carbon spent with VOCs, and then investigates its adsorption capacities. Toluene was selected as the test VOC molecule, and the VSA regeneration experiments results were compared to the thermal swing adsorption process. Cyclic adsorption-desorption experiments were performed using a lab-scale apparatus with commercial activated carbon (Samchully Co.). The VSA regeneration was performed in air (0.5 L/min) at 363.15 K and 13,332 Pa. The comparative results depicted that in terms of VSA regeneration, it was found that after the fifth regeneration, about a 90% regeneration ratio was maintained. These experiments thus confirm that the VSA regeneration process has good recovery while operating at low temperatures (363.15 K) and 13,332 Pa.