• Title/Summary/Keyword: Low-Point

Search Result 5,340, Processing Time 0.033 seconds

Evaluation on the Radiation Exposure of Radiation Workers in Proton Therapy (양성자 치료 시 방사선 작업 종사자에게 미치는 방사선 피폭에 대한 평가)

  • Lee, Seung-Hyun;Jang, Yo-Jong;Kim, Tae-Yoon;Jeong, Do-Hyung;Choi, Gye-Suk
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.24 no.2
    • /
    • pp.107-114
    • /
    • 2012
  • Purpose: Unlike the existing linear accelerator with photon, proton therapy produces a number of second radiation due to the kinds of nuclide including neutron that is produced from the interaction with matter, and more attention must be paid on the exposure level of radiation workers for this reason. Therefore, thermoluminescence dosimeter (TLD) that is being widely used to measure radiation was utilized to analyze the exposure level of the radiation workers and propose a basic data about the radiation exposure level during the proton therapy. Materials and Methods: The subjects were radiation workers who worked at the proton therapy center of National Cancer Center and TLD Badge was used to compare the measured data of exposure level. In order to check the dispersion of exposure dose on body parts from the second radiation coming out surrounding the beam line of proton, TLD (width and length: 3 mm each) was attached to on the body spots (lateral canthi, neck, nipples, umbilicus, back, wrists) and retained them for 8 working hours, and the average data was obtained after measuring them for 80 hours. Moreover, in order to look into the dispersion of spatial exposure in the treatment room, TLD was attached on the snout, PPS (Patient Positioning System), Pendant, block closet, DIPS (Digital Image Positioning System), Console, doors and measured its exposure dose level during the working hours per day. Results: As a result of measuring exposure level of TLD Badge of radiation workers, quarterly average was 0.174 mSv, yearly average was 0.543 mSv, and after measuring the exposure level of body spots, it showed that the highest exposed body spot was neck and the lowest exposed body spot was back (the middle point of a line connecting both scapula superior angles). Investigation into the spatial exposure according to the workers' movement revealed that the exposure level was highest near the snout and as the distance becomes distant, it went lower. Conclusion: Even a small amount of exposure will eventually increase cumulative dose and exposure dose on a specific body part can bring health risks if one works in a same location for a long period. Therefore, radiation workers must thoroughly manage exposure dose and try their best to minimize it according to ALARA (As Low As Reasonably Achievable) as the International Commission on Radiological Protection (ICRP) recommends.

  • PDF

Attitudes of Safety for the Food Developed by Gene-Recombination in Korea -Focus on the Specialist Group Related to Food- (유전자재조합 식품의 안전성에 대한 기본인식 조사 - 식품관련 전문가 그룹을 중심으로 -)

  • 김영찬;박경진;이홍석;김동연
    • Journal of Food Hygiene and Safety
    • /
    • v.14 no.4
    • /
    • pp.397-407
    • /
    • 1999
  • A survey was conducted to investigate the attitudes of the food specialist to the food developed by gene recombination. The mail survey was distributed to 1,400 food specialists and received 464, a response rate of 33.1%. Respondents were asked about knowledge, concerns of potential hazards, purchasing and labeling of the gene recombination foods. Most respondents (98.7%) have some knowledge on the gene recombination foods. 91.3% of respondents recognized necessity of gene recombination technology. However, they also point out its potential hazards (80.9%). The groups with less knowledge showed their increased worry on the hazard in comparison with ones of having more knowledge(p<0.01). The result indicated that there was negative relationship between knowledge and worry on the gene recombination foods. The groups with more knowledge showed their increased purchasing on gene recombination foods in comparison with ones of having less knowledge(p<0.01). The result indicated that there was positive relation-ship between their purchase intent for gene recombination foods and knowledge. 68.4% of respondents showed their interest on purchasing the gene recombination foods. In this group, most of them (44.9%) has on condition that low cost (27.0%). In addition, they also have not use the foods for their children (17.9%) if they buy it. Most respondents (85.3%) want labeling on the gene recombination foods.

  • PDF

The Significance of $p27^{KIP1}$, MIB-1, bcl-2 and p53 Expression in the Differential Diagnosis of Follicular Adenoma and Carcinoma of the Thyroid Gland (갑상선 여포상 선종과 암종의 감별진단에서 $p27^{KIP1}$, MIB-1, bcl-2, p53 발현의 유용성에 대한 연구)

  • Kang Mi-Seon;Yoon Hye-Kyoung;Kim Sang-Hyo;Yoon Ki-Young;Lee Choong-Han;Choi Kyung-Hyun;Hur Bang;Roh Mi-Sook;Hong Sook-Hee
    • Korean Journal of Head & Neck Oncology
    • /
    • v.17 no.2
    • /
    • pp.139-147
    • /
    • 2001
  • Objectives: The most important differential point of follicular carcinoma from adenoma is capsular invasion or angioinvasion of follicular cells. Serial sections for examination of levels of tumor margins are necessary to watch the invasion. However, the interpretation of capsular invasion or angioinvasion is sometimes not feasible on the routine staining of tumor tissue. The aim of this study is to evaluate the clinical significance of expressions of $p27^{KIP1}$, MIB-1, bcl-2 and p53 in differential diagnosis of follicular adenoma and carcinoma. Materials and Methods: 16 cases of follicular carcinoma and 26 cases of follicular adenoma were entered on study of immunohistochemical stains for $p27^{KIP1}$, MIB-1, bcl-2 and p53. In carcinoma cases, correlation between the above markers, patient's age, tumor size, infiltration pattern and metastasis was studied. Results: $p27^{KIP1}$ labelling index (LI) of follicular carcinoma and adenoma was $4.89{\pm}6.92$ and $14.52{\pm}9.17$, respectively, but there was no significant difference between adenoma and carcinoma (p=0.2560). MIB-1 LI of carcinoma and adenoma was $4.11{\pm}3.89$ and $0.80{\pm}0.75$, respectively, and MIB-1 LI was significantly higher in carcinoma (p=0.0000). bcl-2 expression was seen in 2(12.5%) of 16 carcinoma cases and 130(50.0%) of 26 adenoma cases, and bcl-2 expression rate was higher in adenoma than in carcinoma(p=0.014). In one adenoma and one carcinoma case, p53 expression was noted. In follicular adenoma with atypia compared to adenoma without atypia, lower $p27^{KIP1}$ LI, higher MIB-1 LI and lower bcl-2 expression rate were seen. In follicular carcinoma, MIB-1 LI was significantly higher in invasive carcinoma(p=0.045) and was relatively increased in tumors larger than 3.0cm, showing angioinvasion and distant metastasis. But $p27^{KIP1}$ LI was higher in cases over 40 years old(p=0.008) and with conspicuous capsular invasion. There were no positive correlations between expressions of MIB-1, bcl-2 and p53. Conclusion: MIB-1 labelling index and bcl-2 expression could be helpful for differential diagnosis of follicular adenoma and carcinoma, but p53 showed very low expression rate and no significance in differential diagnosis. $p27^{KIP1}$ labelling index reveals decreasing tendency in carcinoma compared with adenoma, MIB-1 LI was considered as a poor prognostic marker in follicular carcinoma, but $p27^{KIP1}$ LI was higher in carcinoma cases over 40 years old with showing conspicuous capsular invasion. Further study for the significance of $p27^{KIP1}$ labelling index in follicular neoplasms is necessary to evaluate diagnostic value of follicular carcinoma.

  • PDF

A Plan to Improve Consumer Satisfaction and Reliability of Opticians by Analyzing Consumers' Spectacles Purchasing Behavior (소비자의 안경 구매 행태 분석을 통한 만족도 및 신뢰도의 향상 방안)

  • Park, Jee-Hyun;Lee, Eun-Hee;Koo, Eun-Hye;Kim, Hee-A;Song, Da-Hye;Hyun, Jin-Hee;Kim, Hyojin
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.15 no.1
    • /
    • pp.1-7
    • /
    • 2010
  • Purpose: To plan and improve consumers' satisfaction by analyzing consumers' purchasing behavior of spectacles. Also this will show the need of improvement in reliance of an optician. Methods: A total of 307 people (10 to 60 years) participated in individual questionnaires. Questionnaires comprised of general characteristic of surveyed people, purchasing spectacles behavior, satisfaction after purchasing spectacles, reliability of optician, and improvement points of optician. Results: Most important points in selecting the product were the design and the price of the spectacles. 142 people (46.3%) replied "average" and 140 people (45.6%) replied "satisfying" out of maximum point of satisfaction level which was 5 points. 72.3% of people have regularly visiting optical shop due to the high accessibility, after-sales care, and courteous optician. On the contrary, 27.7% replied "never visit same optician shop again" because of the low accessibility, minimal range of products, and high price. Data showed that people had high re liability about the opticians' knowledge of product, and their technique of eye refraction. Data revealed that people did not show high satisfaction about opticians' knowledge of ophthalmology, and price of products. Most important improvement points were accurate spectacle prescription by Opticians rating 42% of reply. Factors most considered during spectacle selection among the 10 to 20 age group were design by 34.8% and price by 10.1%. Among the 40 to 50 age group, most considered factors were design by 14% and spectacle frame material by 10.1%. Conclusions: Satisfaction rate of purchasing spectacles for the total participant group was 4.2 average grades. Reliability of opticians' eye refraction result and prescription was 50.5%. However consumers wanted to obtain more accurate eye refraction result and prescription with more comprehensive explanations. Also, consumers wanted opticians to be sensitive and have appreciative eye in select spectacles for customers, and to offer precise spectacle dispensing services and courteous after-sales care.

The Effects of Mean Grain Size and Organic Matter Contents in Sediments on the Nutrients and Heavy Metals Concentrations (퇴적물 내 입도와 유기물 함량이 영양염류 및 중금속 농도에 미치는 영향)

  • Kim, Seog-Ku;Lee, Mi-Kyung;Ahn, Jae-Hwan;Kang, Sung-Won;Jeon, Sang-Ho
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.9
    • /
    • pp.923-931
    • /
    • 2005
  • A study was carried out to identify the major causes of sediments pollution in the Paldang Lake in the vicinity of Gyeongan river. Samples from 40 sites were collected and analyzed to characterize the regional distributions of grain size, organic matter contents, and concentrations of T-N, T-P and heavy metals. contaminations. The mean grain size(Mz) ranged from sand type(Mz, $1{\sim}3\;{\phi}$) where Bukhan River and Namhan River converges at a high flow rate to silt type(Mz, $5{\sim}10\;{\phi}$) at the downstream of Gyeongancheon and Paldang lake, reflecting the water circulation in the area. Except sampling point St. 36 near the wetland, the determination coefficient($r^2$) of Mz and organic matter(LOI) was 0.88, showing that more organic matters are concentrated inside finer sediments. The concentrations of T-N and T-P in sediments were higher in the area at which Mz and organic matters are also higher. High concentrations of T-P analyzed in the sediments, ranging from $216{\sim}1,623\;{\mu}g/g$ (Avg. $769\;{\mu}g/g$) could be considered as a critical level. Adsorbed-P and NAI-P, which are easily released to the surrounding environments when physico-chemical characteristics of sediments are changed, was found to be around 20%, which was showed by the result of fractionated-P. Moreover, Principle Component Analysis(PCA), showed that high concentrations of T-N, T-P, organophilic metals (Cd, Cu, Pb, Zn) are distributed in the areas where high organic matter contents and fine grain-sized sediments are found. However, results of $I'_{geo}$ (Geoaccumulation Index) that considers the grain size of sediments showed that heavy metal concentrations in the lake was low enough to be considered as Class 1 indicating the relative degree of pollution was less than zero.

Synthesis of Zeolite P1 and Analcime from Sewage Sludge Incinerator Fly Ash (하수슬러지 소각 비산재를 이용한 제올라이트 P1 및 Analcime의 합성)

  • Lee, Je-Seung;Chung, Sook-Nye;Park, Chul-Hwi
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.30 no.6
    • /
    • pp.659-665
    • /
    • 2008
  • This study is about zeolite synthesis from the sewage sludge incinerator fly ash of "S" sewage treatment center located in Seoul. For this purpose, the properties of raw fly ash as starting material, the hydrothermal conditions for zeolite synthesis and the environmental applicabilities of synthesized zeolites were examined. Fly ash from sewage sludge incinerator has large quantities of SiO$_2$ and Al$_2$O$_3$ and their contents are 42.8 wt.% and 21.2 wt.% respectively. So fly ash is considered to be possible starting material for zeolite synthesis. The results from leaching test of fly ash showed that the concentration of hazardous metals were very low as compared with the Korea leaching standard of the Waste Management Law. But the concentration from total recoverable test of fly ash were higher than the fertilizer standard of Fertilizer Management Law. Major zeolite products synthesized by hydrothermal reaction are analcime in teflon vessel and zeolite P1 in borosilicate flask. Optimum conditions for the synthesis of analcime were 1 N of NaOH concentration, 16 hour of reaction time and 135$^{\circ}C$ of reaction temperature. For the zeolite P1 formation, the proper conditions were demonstrated to be 5 N of NaOH concentration, 16 hour reaction time and 130$^{\circ}C$ of reaction temperature in this study. Hazardous metal contents in the analcime product are similar with those in raw fly ash. In case of the zeolite P1, the contents are reduced to nearly a half. Raw fly ash and the analcime product showed NH$_4{^+}$ ion exchange capacity of 0$\sim$1.0 mg of NH$_4{^+}$g$^{-1}$ and 3.0$\sim$7.4 mg of NH$_4{^+}$g$^{-1}$, respectively. However, the zeolite P1 product reached exchange capacity to 14.6$\sim$17.8 mg of NH$_4{^+}$g$^{-1}$. This values are in the range of those of natural clinoptilolite and phillipsite. From this point of view, zeolite synthesis from sewage treatment sludge incinerator fly ash is a good alternative for solid waste recycling.

A Study on Efficiently Designing Customer Rewards Programs (고객 보상프로그램의 효율적 구성에 관한 연구)

  • Kim, Sang-Cheol
    • Journal of Distribution Science
    • /
    • v.10 no.1
    • /
    • pp.5-10
    • /
    • 2012
  • Currently, the rewards programs offered by many companies to strengthen customer relationships have been working quite well. In addition, many companies' rewards programs, designed for stabilizing revenue, are recognized to be effective. However, these rewards programs are not significantly differentiated between companies and there are no accurate conclusions currently, which can be made about their effects. Because of this, a company with a customer rewards program may not comprehend the true level of active participation. In this environment some companies' rewards programs inadvertently hinder business profitability as a side effect while attempting to increase customer loyalty. In fact, airline and oil companies pass on the financial cost of their programs to the customer, and as a result, they have been criticized publicly. The result of this is that the corporations with bad rewards programs tend to get a bad image. In this study of stores' rewards programs, we centered our focus on the design of the program. The main problem in this study is to recognize the financial value of the rewards program and whether it can create a competitive edge for the companies despite the cost issues experienced by them. Customers receiving financial rewards for their business may be just as satisfied with a particular company or store versus those who are not, and the program, perhaps, does not form a distinctive competitive advantage. When the customer is deciding between competing companies to secure their product needs with, we wanted to figure out how much of an affect a valuable reward program had on their decision making. To evaluate this, we set the first hypothesis as, "based on the level of involvement of the customers, there is a difference between customers' preferences for rewards programs." In the results of Experiment 1 we saw that in a financial compensation program for high-involvement groups and low-involvement groups, significant differences appeared and Hypothesis 1 was partially supported. As for the second hypothesis that "customers will have different preferences between a financial rewards programs (SE) and a joint rewards programs (JE)," the analysis showed that the preference for JE was significantly higher than that for other programs. In addition, through Experiment 2, we were able to find meaningful results, which revealed that consumers have shown a significant difference in their preferences between SE and JE. The purpose of these experiments was to enable the designing of a rewards program by learning how to enhance service information distribution and strengthen customer relationships. From the results, there should be a great amount of value for future service-related endeavors and academic research programs. The research is significant, because the results can be found to have a positive effect on reward program designs however, it does have the following limitations. First, this study was performed using an experiment, and all experiments have limitations. Second, although there was an individual evaluation and a joint evaluation, setting a proper evaluation criteria was difficult. In this study, 1,000 Korean won (KRW) in the individual evaluation had a value of 2 points, and, in the joint evaluation, 1,000 KRW had a value of 1 point. There may have been alternative ways to differentiate the evaluations to obtain the proper results. In this study, since there was no funding, the experiments were performed orally however, this was complementary to the study. Third, the subjects who participated in this experiment were students. Conducting this study through experimentation was unavoidable for us, and future research should be conducted using an actual program with the target customers.

  • PDF

A Case Study of Artist-centered Art Fair for Popularizing Art Market (미술 대중화를 위한 작가중심형 아트페어 사례 연구)

  • Kim, Sun-Young;Yi, Eni-Shin
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.2
    • /
    • pp.279-292
    • /
    • 2018
  • Unlike the global art market which experienced rapid recovery from the impacts of the Global Financial Crisis in 2008, the Korean art market has not yet fully recovered. The gallery-oriented distribution system, vulnerable primary art market functions, and the market structure centered on a small number of collectors make it difficult for young and medium artists to enter the market and, as a result, deepen the economic polarization of artists. In addition, the high price of art works limits market participation by restricting the general public. This study began with the idea that the interest of the public in the art market as well as their participation in the market are urgent. To this end, we noted that public awareness of art transactions can be a starting point for improving the constitution of the fragile art market, focusing on the 'Artist-centered Art Fair' rather than existing art fairs. To examine the contribution of such an art fair to the popularization of the art market, we analyzed the case of the 'Visual Artist Market (VAM)' project of the Korea Arts Management Service. Results found that the 'Artist-centered Art Fair' focuses on providing opportunities for market entry to young and medium artists rather than on the interests of distributors, and promotes the popularization of the art market by promoting low-priced works to the general public. Also, the 'Artist-centered Art Fair' seems to play a primary role in the public sector to foster solid groups of artists as well as to establish healty distribution networks of Korean Art market. However, in the long run, it is necessary to promote sustainable development of the 'Artist-centered Art Fair' through indirect support, such as the provision of a publicity platform or consumer finance support, rather than direct support.

Suspected Upper Gastrointestinal Bleeding by Interaction of Clozapine and Buspirone (상부위장관 출혈이 의심되는 클로자핀과 부스피론의 상호작용)

  • Sung, Yu-Mi;Kim, Soo-In;Yun, Kyu-Wol;Lim, Weon-Jeong
    • Korean Journal of Psychosomatic Medicine
    • /
    • v.14 no.1
    • /
    • pp.62-66
    • /
    • 2006
  • Introduction: Unexpected serious and lethal drug interactions can be occurred by polypharmacy for treatment-resistant psychiatric disorders. We report a case who has suspected upper gastrointestinal bleeding after the combination of clozapine and buspirone. Case : A 69-year-old woman with DSM-IV schizophrenia who was admitted to our hospital had no previous medical problems. Findings on physical exam, laboratory values, EEG, and a magnetic reso-nance imaging scans were no abnormality, except for slightly low level of hemoglobin at admission. Because of aggravating anxiety symptom, a trial of buspirone was begun from 15mg, in addition to olanzapine 30mg. And then olanzapine was switched to clozapine due to her treatment-refractory his-tory and poor response on this admission. Moreover, At the admission 11 weeks later, after 4 weeks of starting buspirone and clozapine, she was placed on a regimen of clozapine 300mg and buspirone 60mg. At this point, she started to complaint nonspecific abdominal pain for 4 days and then hematemesis, melena and hypotension were developed suddenly with negative findings in gastroduodenoscopy. After stopping all medication, the suspected upper gastrointestinal bleeding was subsided. After the regimen was switched back to clozapine only, psychotic symptoms were improved without the recurrence of the adverse events. Conclusion : We concluded that the upper gastrointestinal bleeding in this case was attributed to the drug interaction with clozapine and buspirone, although the definite mechanism is not clear. The clini-cians should be very cautious to prescribe the combination of clozapine and buspirone due to a possible lethal adverse effect.

  • PDF

Evaluation of Dark Spots Formated on the High Temperature Metal Filter Elements (고온 금속필터 element 표면에 생성된 반점에 대한 평가)

  • Park, Seung-Chul;Hwang, Tae-Won;Moon, Chan-Kook
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.6 no.3
    • /
    • pp.171-178
    • /
    • 2008
  • Metal filter elements were newly introduced to the high temperature filter(HTF) system in the low- and intermediate-level radioactive waste vitrification plant. In order to evaluate the performance of various metal materials as filter media, elements made of AISI 316L, AISI 904L, and Inconel 600 were included to the test set of filter elements. At the visual inspection to the elements performed after completion of each test, a few dark spots were observed on the surface of some elements. Especially they were found much more at the AISI 316L elements than others. To check the dark spots are the corrosion phenomena or not, two kinds of analyses were performed to the tested filter elements. Firstly, the surfaces or the cross sections of filter specimens cut out from both normal area and dark spot area of elements were analyzed by SEM/EDS. The results showed that the dark spots were not evidences of corrosion but the deposition of sodium, sulfur and silica compounds volatilized from waste or molten glass. Secondly, the ring tensile strength were analyzed for the ring-shape filter specimens cut out from each kind of element. The result obtained from the strength tested showed no evidence of corrosion as well. Conclusionally, depending on the two kinds of analysis, no evidences of corrosion were found at the tested metal filter elements. But the dark spots formed on the surface could reduce the effective filtering area and increase the overall pressure drop of HTF system. Thus, continuous heating inside filter housing up to dew point will be required normally. And a few long-period test should be followed for the exact evaluation of corrosion of the metal filter elements.

  • PDF