• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.3
• /
• pp.114-119
• /
• 2005

We investigated compatibilizing effects of electrical properties such as charge distributions and electrical breakdown in blends of low density polyethylene (LDPE) / polystyrene (PS) with poly [styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS), the triblock copolymer. The blends with $70\;wt\%$ of LDPE and $30\;wt\%$ of PS were prepared through a melt blending in a batch type kneader at a temperature of $220^{\circ}C$ when the SEBS content increased up to $10\;wt\%$. Scanning electron microscopy (SEM) was investigated for observation of morphology of LDPE / PS blends increasing SEBS contents. The morphological observation showed that addition of SEBS results in the domain size reduction of the dispersed PS phase and a better interfacial adhesion between LDPE and PS phases. Measurements of space charge distributions for blends was carried out with pulsed electroacoustic (PEA) method. It was possible to observe that the amount of charge storage in the LDPE / PS blends decreased wiか increasing of SEBS content. The location of SEBS at a domain interface enables charges to move from one phase to the other via domain interface and results in a indicative decrease in the amount of space charge for the LDPE / PS blends with SEBS. Electrical breakdown strength of these blends was observed. It was found that the maximum breakdown strength of the blend was 51.55 kV/mm. These results were better than 38.38 kV/mm of LDPE used electrical insulator for cables and were caused by crystalinity of blends. Because the crystalinity of blends were lower than LDPE, electrical breakdown strength of LDPE / PS blends is higher than that of LDPE. We evaluated the possibility of these blends for insulating material substituted LDPE.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.1 no.1
• /
• pp.18-28
• /
• 1978

To study about the effect of harvested stage and physical treatment such as wilting or chopping of plant material on the quality of silage, Italian ryegrass(Lolium multiflorum) harvested at pre-headed or heading stage and Seombadi(Dystaenia takesimana Nakai) harvested at pre-flowering stage, were used for the purpose. The materials were treated in four different ways which were a) non-treated, b) one day-wilted, c) chopped with 1 to 2cm length and d) wilted and chopped, and those were ensiled in plastic containers and stored at room temperature for three months. After three months of storage, it was investigated and obtained the following results. 1) Having 6.31 of NFE/CP ratio and low content of crude fiber, Seombadi contained more suitable constituents for silage than Italian ryegrass. 2) Under the non-treated or chopped condition, the loss of NFE was higher, and lower with wilted material. 3) Wilting or chopping improved DM digestibility. 4) Compared with Italian ryegrass harvested at pre-headed stage, the storage amount per unit volume of heading stage-Italian ryegrass and Seombadi were higher 8% and 69% respectively, and wilting and/or chopping increased the storage amount 41 to 134%. 5) The majority of weight loss during storage was observed at 1st week after ensiling, it continued slightly until 4th week. The highest loss in 8th week were 3.76% of nontreated material. 6) One day wilting increased DM content of silage 23 to 131%. Wilting and chopping increased pH and lactic acid improved the quality considerably. 7) The correlation between $NH_3$ and butyric acid, and between lactic acid and DM were r=0.782**, r=0.634** respectively. The regression equation were y=12.853X+4.908 (X=butyric acid), y=0.016X+1.309(X=DM content), respectively. 8. The above results indicate that it is necessary to wilt or chop material to make good quality silage from Italian ryegrass, and such treatment can improve the quality of silage with Seombadi also.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.1
• /
• pp.31-42
• /
• 2020

Horse fat is known to be an effective ingredient in Asia, and the horse fat itself, which is mixed with other ingredients at the additive level, is often sold as a finished product. In this case, physical properties of the horse fat raw material are important. Many horse fats produced in Korea (Jeju) have low temperature stability, so if not stored at low temperatures, segregation may occur. In the case of Japanese horse fat, it is partially hydrogenated or is used the solid phase as the horse fat by separating the liquid phase and the solid phase that is harder and more stable than the horse fat of Jeju. In this study, the physical properties were tested to improve the temperature stability even without the partial hydrogenation process of Jeju horse fat. Various oil gelling agents were used in the study. Results confirmed that the physical properties of the hydroxystearic acid added Jeju horse fat were improved. In addition, stability evaluations at temperatures of 25 ℃, 40 ℃, 45 ℃ and flow behavior evaluations at temperatures of 25 ℃, 30 ℃, 40 ℃ were performed for Jeju horse fat with hydroxystearic acid, 100% Jeju horse fat, and 100% Japanese horse fat. Results showed that the Jeju horse fat improved in flow behavior by adding hydroxystearic acid similar to that of Japanese horse fat. In addition, when the crystal state was observed under a microscope, the thermal stability was improved by decreasing the size of the needle-type crystals with the addition of hydroxystearic acid. Jeju horse fat containing hydroxystearic acid was found to have no physical problems even when stored at room temperature for a long time.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.182-189
• /
• 2010

To develop a new functional kimchi with cognition-enhancing properties, black Panax ginseng extract (0.5-5%, w/w) was added to a baechu kimchi preparation and the mixture stored at $4^{\circ}C$ for 30 days. Compared with control kimchi, the L values of ginseng-treated material were significantly decreased, but the a and b values were increased. The hardness value of ginseng-treated kimchi was significantly higher than that of control material from the $20^{th}$ day of storage. The edibility period of baechu kimchi treated with ginseng was prolonged by approximately 15 days compared with control kimchi. This resulted from decreases in the numbers of lactic acid bacteria and yeasts during the final stages of fermentation in ginseng-treated material. Inhibition of acetylcholinesterase activity by ginseng-treated kimchi was 2-fold higher than that of control material. A strong ginseng flavor and a bitter taste were evident in kimchi treated with 5% (w/w) ginseng, and sensory quality was thus decreased compared with control material. It was concluded that an appropriate concentration of black ginseng extract was 3% (w/w) in preparation of kimchi with a cognition-enhancing effect.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.81-88
• /
• 2020

Flight data recorder is a equipment that records data required for investigation of aircraft accidents and should be developed in compliance with the ED-112A standard. Unlike general data storage device, flight data recorder must be able to recover data after an aircraft accident, requiring a housing and a memory board to protect data in extreme environments. To attain this performance, we designed a housing that can withstand the test by analyzing the physical environment of the impact, shear/tensile, penetration resistance and static crush test of the crash survival test and minimized the size and weight compared to the existing one in consideration of the installation of the aircraft in this paper. Insulation material and thermal block material were applied to endure high and low temperature fire so that the internal temperature does not rise above 150℃ even in 260℃, 10 hour environment. In addition, the memory board is designed to minimize the size and we devise a hoping programming method to prevent continuous data loss of more than 16 seconds. Through this, Crash protected memory module that satisfies ED-112A was completed.

• Journal of Hydrogen and New Energy
• /
• v.26 no.5
• /
• pp.416-422
• /
• 2015

Lithium Ion capacitor (LIC) is a new storage device which combines high power density and high energy density compared to conventional supercapacitors. LIC is capable of storing approximately 5.10 times more energy than conventional EDLCs and also have the benefits of high power and long cycle-life. In this study, LICs are assembled with activated carbon (AC) cathode and pre-doped graphite anode. Cathode material of natural graphite and artificial graphite kinds of MAGE-E3 was selected as the experiment proceeds. Super-P as a conductive agent and PTFE was used as binder, with the graphite: conductive agent: binder of 85: 10: 5 ratio of the negative electrode was prepared. Lithium doping condition of current density of $2mA/cm^2$ to $1mA/cm^2$, and was conducted by varying the doping. Results Analysis of Inductively Coupled Plasma Spectrometer (ICP) was used and a $1mA/cm^2$ current density, $2mA/cm^2$, when more than 1.5% of lithium ions was confirmed that contained. In addition, lithium ion doping to 0.005 V at 10, 20 and $30^{\circ}C$ temperature varying the voltage variation was confirmed, $20^{\circ}C$ cell from the low internal resistance of $4.9{\Omega}$ was confirmed.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.140-146
• /
• 2010

This paper addresses recent status and trends of carbon dioxide capture technologies using dry sorbents in the flue gas. The advantages of dry sorbent $CO_2$ capture technology are broader operating temperature range, less energy loss, less waste water, less corrosion problem, and natural properties of solid wastes. Recently, U.S.A. and Korea have been developing processes capturing $CO_2$ from real coal flue gas as well as sorbents improving sorption capacity to decrease total $CO_2$ capture cost. New class of dry sorbents have been developed such as chemisorbents with alkali metals of which material cost is low, amines physically adsorbed on silica supports, amines covalently tethered to the silica support, carbon-supported amines, polymer-supported amines, amine-containing solid organic resins and metal-organic framework. The breakthrough is needed in the materials on dry sorbents to decrease capture cost.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.751-758
• /
• 2020

SCR technology, which uses urea-water as a NO_x reducing agent, has been widely used to reduce NO_x in marine diesel engines. However, as an alternative NO_x reducing agent, solid-phase ammonium carbamate has several advantages, such as low-temperature NO_x reduction performance and NH₃ storage capacity. This study presents a method for evaluating the purity of ammonium carbamate using EA, FTIR, and XRD to investigate the change in the material characteristics of ammonium carbamate when it is exposed to various temperature and pressure conditions. In this study, it was found that the purity of ammonium carbamate can be effectively evaluated via EA analysis. The FTIR analysis results confirmed that the properties of ammonium carbamate did not change even after repeated heating and cooling under thermal decomposition temperature conditions, which may be applied to the SCR system of marine diesel engines. Additionally, it was found that when ammonium carbamate was exposed to the atmosphere for a long time, it transformed into ammonium carbonate.

• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.63-76
• /
• 2021

The purpose of this study is to scientifically analyze physicochemical characteristics of the roof tiles used for palaces in the Joseon Dynasty which stored in Changdeokgung material storage and Seooreung Jaesil and the modern handmade ones which made by N company to understand the differences between their manufacturing techniques. Through chromaticity, cross-sectional observation, component analysis, and crystal structure analysis, it was possible to confirm the physicochemical properties and fired properties of the roof tile. Roof tiles from the Joseon Dynasty have a wider colorimetric range and higher apparent porosity and water absorption, on average, than the modern roof tiles. The cross section of the Joseon Dynasty roof tiles shows that most clay minerals have not been vitrified, remaining in the form of atypical particles, while the modern roof tiles have denser clay materials. X-ray diffraction analysis identified low-temperature minerals such as micas in Joseon roof tiles but no peak of these minerals was observed in the modern roof tiles, implying that the modern ones are fired at higher temperature than the Joseon ones. Therefore, the modern roof tiles are fired at higher temperature and have higher density than the Joseon ones due to the use of pugmills. The general content of main ingredients was similar between the two. Additionally, the principal component analysis of trace elements in the Joseon roof tiles showed that most samples were from similar areas. It seems that the Joseon roof tiles were manufactured using soils supplied from a specific region at the same timeframe and their consistency in the content of principal components implies that they also have similar mix proportions of clay.