• Design & Manufacturing
• /
• 제15권3호
• /
• pp.7-12
• /
• 2021

Plastic injection molds used for rapid heating and cooling must minimize surface damage due to friction and maintain excellent thermal and low electrical conductivity. Accordingly, various surface treatments are being applied. The properties of Al₂O₃ coating and DLC coating were compared to find the optimal surface treatment method. Al₂O₃ coating was deposited by thermal spray method. DLC films were deposited by sputtering process in room temperature and high temperature PECVD (Plasma enhanced chemical vapor deposition) process in 723 K temperature. For the evaluation of physical properties, the electrical and thermal conductivity including surface hardness, adhesion and wear resistance were analyzed. The electrical resistance of the all coated samples was showed insulation properties of 24 MΩ/sq or more. Especially, the friction coefficient of high temp. DLC coating was the lowest at 0.134.

• 자원리싸이클링
• /
• 제25권5호
• /
• pp.57-63
• /
• 2016

본 연구는 호주산 저품위 동광의 선광실험결과로 얻은 고품위 광물의 황산화 배소 및 선택적 침출반응 조건 확립을 통해 유가 광물 중에 함유된 성분을 선별적으로 용해해냄으로써 철 성분을 비롯한 불순물을 줄이거나, 동 및 니켈 성분을 용해 혹은 잔사에 잔류시킴으로써 유가금속회수를 효과적으로 회수하고자 하는데 목적이 있다. 본 연구실험결과 얻은 최적조건은 황산화 배소시 $450^{\circ}C$, $Na_2SO_4$ 2 mole ratio 및 1.5 h이었고, 배소산물의 침출온도는 상온 및 침출제는 $H_2O$ 혹은 1M $H_2SO_4$이었다. 최적조건 하에서 Cu 성분은 90 wt.% 침출율을 Fe성분은 20 wt.%내외, Ni성분은 15 wt.% 정도를 나타내는 것으로 보아 선택적 분해침출이 가능하다.

• 마이크로전자및패키징학회지
• /
• 제11권3호
• /
• pp.91-97
• /
• 2004

PZT 박막을 rf-마그네트론 스퍼터링으로 $Pt/Ti/SiO_2/Si$ 기판 위에 형성시켰다. $5\%$ 과잉 PbO 를 포함한 bulk PZT 타겟을 사용하였다. 상온에서 PZT 박막을 얇게 입힌 후 나머지 두께를 $650^{\circ}C$에서 in-situ 방법으로 형성시켰다. 강유전 특성을 갖는 PZT 상은 $650^{\circ}C$에서 형성되었다. 2단계 스퍼터링에 의해 누설전류 특성을 크게 증진시킬 수 있었고, 적절한 두께의 상온층을 포함시킨 경우 $2{\times}10^{-7}A/cm^2$의 매우 작은 누설전류를 나타냈다. 누설전류 기구에 대한 조사 결과, 여러 조건에서 제조된 PZT 박막의 전기전도는 모두 bulk-limit 기구에 의한 것임을 알 수 있었다.

• 한국화재소방학회논문지
• /
• 제13권3호
• /
• pp.19-26
• /
• 1999

이산화탄소 소화설비는 가스계 소화설비 중 비용의 저렴함과 작동후의 청결함, 그리고 절연성등의 특성으로 인하여 통신기기설, 전산실, 전기실 등에 많이 사용되고 있다. 이산화탄소는 저장시 액체이다가 방출과 동시에 가스상태로 기화하는데 이때 온도가 급격히 내려간다. 이러한 냉각효과에 의하여 반도체장비나 정보저장장치에 손상을 줄 수 있다. 본 연구는 이산화탄소 방사시 구획내부의 온도분포와 손상정도를 규명하여 차후 연구의 기초자료를 제공하고 $CO_2$소화설비 설계나 관련규정의 정비에 도움이 되고자 시행했다. $CO_2$ 소화설비 방사 시 노즐부분의 순간방출온도는 $-82.53^{\circ}C$까지 내려갔다. 소화약제가 모두 방사되는 1분경의 실내평균온도는 $-40^{\circ}C$이며 이는 충분히 정보저장 장치류에 피해를 입힐 수 있는 온도이다. 플로피 디스켓을 설치하고 실험한 결과 70%의 고장율을 보였다. 컴퓨터를 넣고 실제 화재를 일으켜 실험한 결과, 특별한 고장이 없었으나, 작동으로 인한 내부의 열과의 온도차이에 의하여 수증기가 응결되고 녹아 흐르는 현상을 보여 Water Damage의 발생가능성을 발견할 수 있었다. 또한 저온지속시간(-5$^{\circ}C$기준)이 각 시나리오에서 평균 5분이상 나타났으며, 만약 실내의 단열과 밀폐조건이 더욱 좋은 경우라면 더 장시간 지속될 수 있다.

• 한국재료학회지
• /
• 제8권10호
• /
• pp.879-883
• /
• 1998

초합금의 진공정밀주조시에 진공하에서 용해한 합금을 $1000~1700^{\circ}C$로 가열한 세라믹 주형에 주입하고 난 후, 용탕이 장시간 주형안에 노출됨으로써, 주형의 고온강도가 높아야 하므로 고품위의 주형재를 사용하여 왔으나, 저품위의 값싼 소재를 사용하여 고품위의 주형과 동등한 효과를 갖게 하고자 주형내의 Silica 함량을 조절하였다. 그 결과 SiO2 첨가량이 7.7wt.%일 때, 다른 시험편에 비해 소성강도와 고온강도가 10-55%가량 증가 하였다. 따라서 일반적으로 정밀주조 주형으로 사용하는 용융알루미나와 colloidal silica의 혼합비를 제어하여 단결절 주조용 주형을 개발하였다.

• 한국농공학회지
• /
• 제17권1호
• /
• pp.3677-3684
• /
• 1975

A newly devised dryer with heated air for the farm products, especially suited for high water content materials such as red pepper, Beer ground, each Vegetables, and Low water content materials such as Rough rice was tested for its thermal efficiency and drying mechanism, and the optimum conditions for each sample were established. In order to improve the present rural situation of drying farm products which entirely dependent upon natural solar radiation, a study upon an economic multi-parpose dryer was conducted. A series of drying tests were run first with red pepper which is one of the important cash crop in Korean farm. And successive series of tests were also run with such proaucts as garlic, sweet potatoes, green onion, radish, Beer ground and Rough rice. The results from the above experiment in drying system with heat dryer can be summarized as follows. 1. Drying duration could be shortened by the tempering effect in high water content crop such as red pepper and beer ground. 2. The color changes occured in around 20% water content in red pepper. The degree of color change was heavily affected by high temperature and short drying duration. 3. The drying condition of red pepper was most favourable at the temperature of 85$^{\circ}C$ in early stage and 80$^{\circ}C$ in middle stage and 75$^{\circ}C$ at the final stage, and with the air rate of 0.81㎥/sec and with sample amount of 200kg. 4. The drying condition of Rough rice(I.R.667) was most favourable at the templature of 40$^{\circ}C$ in early stage and 35$^{\circ}C$ in middle stage and final stage and with the air rate of 0.2㎥/sec and with sample amount of 75kg. 5. In order to prevent the color change of red pepper and to assure high efficiency in drying mechanism, it was necessary to lower the temperature as the time passes in drying process. 6. For vege tables, the drying rate were short in early stage and there was also tempering effect. However, for garlics, Constant drying rates through the early and final stages were observed and there were no tempering effects. 7. The drying condition or capability were as follows; Sample drying temp($^{\circ}C$) amount of material(kg) drying time(hr) Red pepper 85 200 9 Garlic 85 150 7 Sweet potato 85 200 6 Green Onion 85 200 4 Carrot 85 200 4 Radish 90 250 4 Rough rice(I.R.667) 35 75 4 Beer ground 90 320 3 Considering the above result of experiments, if this kind of dryers were distributed Korean farm and the optimun process were practiced in rural area, it would certainly help them improving the qualites of their product preventing their undue losses, and thus assuring an increase of Korean farm income and promotion of their living standards.

• 대기
• /
• 제23권2호
• /
• pp.171-186
• /
• 2013

Recently, the number of observations used in a data assimilation system is increasing due to the enormous amount of observations, including satellite data. However, it is not clear that all of these observations are always beneficial to the performance of the numerical weather prediction (NWP). Therefore, it is important to evaluate the effect of observations on these forecasts so that the observations can be used more usefully in NWP process. In this study, the adjoint-based Forecast Sensitivity to Observation (FSO) method with the KMA Unified Model (UM) is applied to two high-impact weather events which occurred in summer and winter in Korea in an effort to investigate the effects of observations on the forecasts of these events. The total dry energy norm is used as a response function to calculate the adjoint sensitivity. For the summer case, TEMP observations have the greatest total impact while BOGUS shows the greatest impact per observation for all of the 24-, 36-, and 48-hour forecasts. For the winter case, aircraft, ATOVS, and ESA have the greatest total impact for the 24-, 36-, and 48-hour forecasts respectively, while ESA has the greatest impact per observation. Most of the observation effects are horizontally located upwind or in the vicinity of the Korean peninsula. The fraction of beneficial observations is less than 50%, which is less than the results in previous studies. As an additional experiment, the total moist energy norm is used as a response function to measure the sensitivity of 24-hour forecast error to observations. The characteristics of the observation impact with the moist energy response function are generally similar to those with the dry energy response function. However, the ATOVS observations were found to be sensitive to the response function, showing a positive (a negative) effect on the forecast when using the dry (moist) norm for the summer case. For the winter case, the dry and moist energy norm experiments show very similar results because the adjoint of KMA UM does not calculate the specific humidity of ice properly such that the dry and moist energy norms are very similar except for the humidity in air that is very low in winter.