• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1889-1893
• /
• 2000

During the test drive of developing vehicle, a low frequency vibration of sprung mass on front outer wheel has been frequently observed in cornering with some speed. The purpose of this paper is to investigate the low frequency vibration of the sprung mass. The analysis result shows that the low frequency vibration is caused by sudden migration of the center of gravity of vihicle and it is determined by geometric points of suspension.

• 유공압시스템학회논문집
• /
• 제4권1호
• /
• pp.18-24
• /
• 2007

The continuously variable transmission (CVT) of which speed ratio can change continuously in a fixed range has the benefits of low fuel consumption and exhaust gas because it enables the engine of a vehicle to operate in a high efficiency range regardless of vehicle speed. The speed ratio of belt type CVT is controlled by adjusting line pressure. The one of the line pressure control methods, mechanical-hydraulic control is usually adopting VDT's control method, in which the secondary solenoid valve has two functions both a regulator and a line pressure controller. However, this control method could not show the high performance of CVT with optimal driving capability because of the limitation of simple control algorithm, and it could not gain market share sufficiently in spite of the advantage of CVT with low fuel consumption. On the other hand, the electro-hydraulic control method gives the enhancement of power performance and low fuel consumption by implementing various driving mode using the proportional control or PWM control. The key of CVT technique is to develop a control algorithm of the electro-hydraulic solenoid valve in order to implement the speed ratio efficiently. In this paper, the line pressure control algorithm is proposed and the hydraulic system is controlled using metal belt type CVT test rig and the embedded ECU platform.

• 대한전자공학회논문지TE
• /
• 제39권1호
• /
• pp.71-76
• /
• 2002

차량의 폭발적 증가로 인해 저속, 서행형태로 주행시간이 점점 늘어나므로, 본 연구에서는 연비향상을 목적으로 정차상태에서는 일부 실린더만으로 일정한 엔진회전수를 유지하고, 주행상태에서는 전 실린더를 이용하는 가변실린더에 대해 실제 하드웨어로 제작하여 실험해 보았다. 과거에 일부 제작되었던 가변실린더 엔진은 정차상태나 저속상태에서 사용하는 실린더 주위에 열이 집중하여 열응력이 발생하고, 사용하지 않는 실린더는 냉각수의 순환으로 인해 주변의 온도가 더욱 떨어지게 되어, 재점화시에 많은 유해가스가 배출되고 연료 소모량도 많아지게 되며, 엔진회전수가 고르지 못하는 문제가 있었다. 이러한 문제점을 극복하고자 정지상태나 저속주행상태에서와 같이 많은 출력을 요하지 않는 운행조건에서는 새로운 점화방식과 밸브 개폐시기를 이용하여 연비를 향상시키는 방안을 제시하고, 그 타당성을 검증하였다.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.149-156
• /
• 1999

In this study, aerodynmaic characteristics of the notch-back and fast-backpassenger vehicle models(1/10~1/12 acale) attached with winglets were experimentally investigated in a low speed wind tunnel. For various positions(X/L). tilted angles($\beta$) of a winglet, the aerodynamic forces on the vehicle model and rear-surface pressures were measured at various flow speeds. Also a flow of model surface was visualized by tuft method. The experimental results showed that winglets effect aerodynamic characteristics of vehicle models. A maximum of 3% reduction in lift coefficient was achieved with winglets at $\alpha$=-30$^{\circ}$. A maximum of 10% reduction in drag coefficient was achieved for a model with winglets and a rear-spoiler.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.674-675
• /
• 2022

본 논문에서는 차량 정차해있거나 저속 주행 중 차량 사각지대에 위치한 객체(보행자, 자전거, 이륜차) 인식 가능하고 초당 30프레임의 빠른 객체 인식 성능을 갖는 DPS(FPGA) 기반 객체 인식 방법을 제시한다.

• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.49-57
• /
• 2013

Analysis of fluid-structure interaction for two nearby underwater vehicles immersed in the sea is quite challenging because simulation of flow around them is very difficult due to the complexity of underwater vehicle shapes. The conventional approach using body-fitted or unstructured grids demands much time in dynamic grid generation, and yields slow convergence of solution. Since an analysis of fluid-structure interaction must be based on accurate simulation results, a more efficient way of simulating flow around underwater vehicles, without sacrificing accuracy, is desirable. An immersed boundary method facilitates implementation of complicated underwater-vehicle shapes on a Cartesian grid system. An LES modeling is also incorporated to resolve turbulent eddies. In this paper, we will demonstrate the effectiveness of the immersed boundary method we adopted, by presenting the simulation results on the flow around a modeled high-speed underwater vehicle interacting with a modeled low-speed one.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.23-28
• /
• 2017

This paper is a study of the eddy current brake designed to replace the air brake of railway application. The eddy current brake has the advantage of being able to take a high current density compared to the other application because this brake is used for applying brakes to the rolling stock for a shorter amount of time. Also, this braking system has the merit of being able to take a high current density at low speed rather than at high speed, because the heat generated by the low speed operation is less than that of the high speed operation. This paper also presents a method of improving the output torque of the eddy current brake at low speed operation through a change of the winding as well as the basic design.

• 대한토목학회논문집
• /
• 제29권2D호
• /
• pp.295-303
• /
• 2009

본 연구에서는 가이드웨이의 특성이 중저속 자기부상열차의 주행성에 미치는 영향을 파악하는데 목적을 두고 있다. 이를 위하여 자기 공극의 피드백을 포함한 2자유도 차량에 대한 운동방정식을 구성하고, 최적능동제어기법을 적용하여 수치해석을 수행하였다. 매개변수 연구로 차량 속도, 레일조도, 교량 처짐, 경간의 연속성, 경간장 등이 UTM-01 자기부상열차의 응답에 미치는 영향을 파악하였다. 해석 결과를 보면, 차량 설계속도 내에서는 차량의 응답이 크게 증가하지 않고 일정한 수준을 유지하였으며, 차량의 응답은 주로 가이드웨이 처짐에 의하여 지배를 받은 것으로 나타났다. 결론적으로 차량 공극의 변화를 줄여서 주행성을 향상시키려면 가이드웨이의 최대 처짐을 작게 하고, 단순거더 보다는 연속거더 구조로 구성하는 것이 유리한 것으로 나타났다.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.269-276
• /
• 2006

Running tests on roads were conducted to clarify the influences of road infrastructure, traffic condition and vehicle's emission level to the amount of emission at local roadsides, and to reveal the operation patterns which can reduce the emission peaks. NOx emission peaks of two light duty freight diesel vehicles which have different emission levels were evaluated by using an on-board measurement system. Tests were carried out with various payload conditions and road conditions. As a result many NOx emission peaks were observed when the vehicles were starting or accelerating at intersections. The test vehicle which has higher emission level caused higher frequency and level of NOx emission peaks. Shifting up at lower engine speed in combination with lower acceleration brought out not only reduction of NOx emission peaks level but also of $CO_2$ mass emission.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.30-36
• /
• 2013

Tractor is a farm vehicle that is designed to provide a high tractive effort at low speed. It is used for versatile agricultural tasks such as hauling a trailer, tillage, mowing and construction work. Most older tractors use a manual transmission. However, as the intensity of work increases, tractors equipped with automatic transmission become popular due to the work convenience. In order to give the operator a large degree of control in field work, 24 gears with automatic 8-speed and manual 3-speed are arranged in transmission. This paper deals with the gear train that is designed for 8-speed automatic transmission by the engagement of multi-disk clutches. The gear ratio for each speed as well as power transmission mechanism is analyzed through velocity analysis. In addition, constraints of mesh gear ratio are derived by investigating the power flow path in velocity diagram for the given 8-speed gear ratio.