Glycerol diglycidyl ether와 acrylic acid를 반응하여 지방족 에폭시 아크릴레이트를 합성하였다. 반응 경과는 적외선 분광법, 라만 분광법과 $^1H$ NMR로 분석하였다. 합성한 에폭시 아크릴레이트의 전자선 조사에 의한 경화거동을 조사하기 위해 전자선 조사량에 따른 시료의 분광 분석과 유리전이온도 분석, 인장 특성 등을 분석하였다. 이를 통해 약 30 kGy 정도의 저조사량에서 충분한 경화가 이루어짐을 확인하였다. 또한 합성한 에폭시 아크릴레이트는 점도가 낮아 용매 사용 없이 코팅용으로 사용하기에 적합하며, 경화 시편이 높은 광학적 투과도를 가지고 있어 광학적 투명도를 요구하는 전자선 경화형 광학필름 코팅용에 적합할 것으로 생각된다.
19~20세기 생활민속자료(갓끈 장식, 구슬 및 대롱, 안경테, 안경집 장식, 망건 풍잠 및 관자, 저고리 단추 등)에 사용된 셀룰로오스 나이트레이트는 열화에 의해 균열과 미세 균열이 일어나 부서지고 있다. 균열에 의해 부서진 셀룰로오스 나이트레이트 생활민속자료의 보존을 위해 수용성 아크릴 에멀젼 접착제 4종에 대해 강화와 접착을 평가하였다. 강화처리를 위한 저농도의 아크릴 에멀젼의 점도는 Plextol D 498이 가장 낮았다. 그리고 유리전이온도(Tg)가 상온이하의 접착제 필름은 인장응력과 탄성률은 감소하고 변형률은 증가하여 유연성이 높았다. 인공 태양광 가속 열화 후에는 Plextol D 498과 Primal AC 35 필름은 접착력과 유연성을 유지하였고, Plextol D 498과 Dispersion K 52는 황변이 거의 일어나지 않아, Plextol D 498이 가속 열화에 가장 안정적이었다. 저농도 아크릴 에멀젼의 셀룰로오스 나이트레이트로의 침투성은 Plextol D 498이 가장 우수하였다. Plextol D 498 에멀젼을 사용하여 열화에 의해 부서진 갓끈의 중앙장식에 대한 보존처리는 저농도로(1%, 3%) 수 회 강화처리 후 고농도로(20%) 조각을 접착하여, 열화에 의해 부서지는 현상을 막을 수 있었고 접착이 잘 유지되었다. 보존처리 후 산소와 수분으로 부터의 열화를 막기 위해, 저습도용 탈산소제와 함께 산소 차단 필름으로 밀봉하였다.
NR/NBR 혼합고무 컴파운드의 기계적 물성과 아연 및 황동피복 강선과의 접착특성에 대해 NR/NBR 조성비에 대한 함수로 조사하였다. Mooney 점도와 응력이완시간은 NBR 함량의 증가에 따라 감소하였다. NBR 함량증가에 따라 모듈러스는 전반적으로 증가하였고, 인장강도의 경우 NBR 함량이 40 phr 이하일 경우 유사한 수준을 보이다가 $50{\sim}60\;phr$일 때 최소치를 보인 후 다시 증가하는 경향을 보인 반면, 파괴점에서의 변형은 NBR 함량이 50 phr 이하의 범위에서는 선형적인 감소를 보인 후 50 phr 이후에서는 거의 유사한 수준을 보였다. NR/NBR 혼합고무 컴파운드는 NR과 NBR의 유리전이온도인 $-10^{\circ}C$와 $-55^{\circ}C$에서 탄성모듈러스의 급격한 전이와 tan ${\delta}$ 피크를 나타내 비상용성 블렌드의 거동을 나타내었다. 접착력(pullout force)과 rubber coverage 공히 NBR 함량이 증가함에 따라 급격히 감소하여 NR/NBR 혼합비가 50/50인 경우 NR 컴파운드 대비 약 40% 수준을 보였고, 순수한 NBR 컴파운드의 경우 접착력은 다시 증가하여 NR 컴파운드 대비 약 90% 수준의 접착력을 보였다. Auger spectrometer 분석결과 NBR 함량이 증가할수록 황함량이 감소하였고, 이는 강선-고무간 접착계면에서 접착층이 충분히 성장하지 못했다는 것을 의미하고 접착성능 하락의 원인으로 해석하였다.
Arcella, V.;Colaianna, P.;Brinati, G.;Gordano, A.;Clarizia, G.;Tocci, E.;Drioli, E.
한국막학회:학술대회논문집
/
한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
/
pp.39-42
/
1999
Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.
$3{\sim}5{\mu}m$ 범위의 중적외선에서 75 % 이상의 투과율을 갖는 $BaO-GeO_2-La_2O_3-ZnO$ 계 유리를 제조 및 특성을 평가하였다. Flow button test를 통해 유리 용융이 가능한 조성을 선택 후, ZnO를 10 mol%, 20 mol% 각각 첨가하여 $1350^{\circ}C$에서 1시간 동안 용융하여 $BaO-GeO_2-La_2O_3-ZnO$ 계 유리를 제조하였다. 이 중에서 ZnO를 20 mol% 포함하는 16 mol% BaO-56 mol% $GeO_2-8mol%$$La_2O_3-20mol%$ ZnO 계 유리 전이 온도 $660^{\circ}C$ 이하, 굴절률 1.70 이상, Knoop 경도 530 이상 값을 가지는 것을 확인하였다. 따라서, ZnO를 20 mol% 포함하는 $BaO-GeO_2-La_2O_3-ZnO$ 계 유리는 저온에서 양호한 용융 상태와 우수한 광학적 특성을 확인하였고 특수 광학용 재료 분야에 충분히 활용이 가능하리라 판단되었다.
폴리젖산(poly-lactic acid, PLA)은 옥수수 분말이나 sugar beets와 같은 천연 재료로부터 얻어지는 생분해성 및 생체적 합성을 가진 친환경적인 재료로 각광받고 있으며, 특히 적층가공에서 흔히 사용되는 석유로부터 추출된 ABS (acrylonitrile butadiene styrene)의 대체재로 주목받고 있다. 그러나, PLA의 유리 전이 온도는 60 ℃로 비교적 낮아 열 저항성이 떨어질 뿐만 아니라 PLA는 취성이 강해 충격이 가해졌을 때 부러지는 현상이 발생한다는 단점이 있다. 따라서 PLA의 결정화도 및 연성을 증가시켜 단점을 보완하기 위해 젖산에 조핵제 또는 가소제 등을 첨가하는 연구가 활발히 진행되어 왔다. PEG (polyethylene glycol)은 PLA 사슬에 유동성을 주기 위해 가장 많이 연구된 가소제이나, PLA와 혼화되었을 때 자체적인 결정화가 진행되어 상온에서도 혼화물이 불안정해지며 상분리가 일어나게 된다. 따라서 PLA-PEG의 최적의 혼화 비율을 찾는 것이 필수적이다. 이번 연구에서는 가소제인 PEG를 첨가하였을 때 예측되는 두 물질 간의 혼화도를 Materials Studio 프로그램의 Molecular Dynamics를 이용하여 분석하였다. 특히, 젖산과 PEG의 함량 변화에 따른 혼화도와 젖산의 거울상 이성질체인 L-lactic acid 및 D-lactic acid의 함량에 따른 혼화도를 거시적인 관점에서 예측하였다.
A new photoconducting polymer, diphenyl hydrazone-substituted polysiloxane, was successfully synthesized by the hydrosilylation method and characterized by FT-IR, $^1$H-NMR, and $^{29}$ Si-NMR spectroscopy. The glass transition temperature (T$_{g}$) of the polysiloxane having pendant diphenyl hydrazone was ca. 62 $^{\circ}C$, which enabled a component of a low-T$_{g}$ photorefractive material to be prepared without the addition of any plasticizers. This polysiloxane, with 1 wt% of $C_{60}$ dopant, showed a high photoconductivity (2.8 ${\times}$ 10$^{-12}$ S/cm at 70 V/${\mu}{\textrm}{m}$) at 633 nm, which is necessary for fast build-up of the space-charge field. A photorefractive composite was prepared by adding a nonlinear optical chromophore, 2-{3-[2-(dibutylamino)-1-ethenyl]-5,5-dimethyl-2-cyclohexenylidene} malononitrile, into the photoconducting polysiloxane together with $C_{60}$ . This composite shows a large orientation birefringence ($\Delta$n = 2.6 ${\times}$ 10$^{-3}$ at 50 V/${\mu}{\textrm}{m}$) and a high diffraction efficiency of 81 % at an electric field of 40 V /${\mu}{\textrm}{m}$.textrm}{m}$.EX>.
분자량이 각각 500, 1000, 2500인 비정형 polyether와 sebacoyl chloride로부터 분자량이 약 8000~15000정도인 지방족 폴리에스테르 공중합체를 합성하였으며, $^1$H-NMR과 FT-IR을 이용하여 구조와 조성을 분석, 확인하였다. 합성된 폴리에스테르의 경우, 3가지 시료 모두 결정은 관찰되지 않았으며 사용된 polyether의 분자량에 관계없이 유리전이온도가 약 -77$^{\circ}C$인 완전한 비정형 물질을 얻을 수 있었다. 반면에 poly(ethylene glyool) (PEG)을 이용한 경우는 사용한 PEG의 분자량이 증가함에 따라 공중합체의 융점과 결정화도가 증가함을 알 수 있었다. 분자량이 200과 400인 PEG를 이용한 경우에는 약 -71$^{\circ}C$ 정도의 유리전이온도를 보였으며, 융점은 -42.4$^{\circ}C$와 -22.4$^{\circ}C$에서 관찰되었다. 그러나 분자량이 1000인 PEG를 이용한 경우에는 융점이 23.$0^{\circ}C$로 나타났다. 또한 사용된 PEG의 분자량이 증가할수록 공중합체의 결정화도는 8.8%, 16.2%와 46.7%로 증가하였다.
타이어 트레드 컴파운드와 천연 및 합성 고무 접착제 종류에 따른 가황 전/후의 점착력과 접착력 차이를 비교하였다. 가황 전 점착력은 모든 트레드에서 천연고무 시멘트가 가장 강하고, 시간의 경과에 따른 점착력 감소도 천연고무 시멘트가 합성고무 시멘트보다 낮았다. 가황 전 점착력은 시멘트에 사용된 고무의 유리전이온도에 영향을 받았으며, 천연고무가 합성고무에 비해 시간의 경과에 따른 점착력 감소도 적었다. 가황 후 접착력은 천연고무 시멘트가 천연고무가 주성분인 트레드에 강하게 접착하지만 합성고무가 주성분인 트레드에는 약하게 접착했다. 반면 유화중합 SBR, 용액중합 SBR 시멘트는 모든 트레드 컴파운드에 강하게 접착하였고, 시멘트 고무의 가황 속도가 느릴수록 강한 접착력을 보였다.
The binder plays important roles in determining the quality of pigment coating. In addition to its primary role of binding the pigment to the base paper, the binder performs several other important functions. The binder, also referred to as the adhesive, is the dominant in the aqueous phase of the formulation. Thus it plays a major role in determining viscosity, rheology, water release, and setting time for the coating. Latices based on styrene-butadiene dominate the market for synthetic paper coating binders. Consumption is high and is expected to increase further due to the present tendeyncy toward high-solids coating. The purpose of this study is understanding the impact of various parameters of latex(i.e. Tg, Particle size) affecting prontabilities and optical properties of the coated papers, as well as providing basic information on the use of amphoteric latex for improving print qualities of coated papers. Recently, amphoteric latices, Which are cationic at low pH's but turn anionic at high pH's have attracted interests of paper scientists and engineers. Therefore we investigated the effect of the Tg(glass transition temperature) and particle size of amphoteric latex on the coating qualities. We also studied the effect of mixing ratios (Amphoteric / Anionic)of latex on the coating qualities. Our results showed that Tg and particle size of amphoteric latex have to be controlled for optimizing coated paper qualities. The formulation consisting of 10 parts of amphoteric latex and 5 parts of anionic latex gave best results in ink receptivity, smoothness, air permeability, opacity and sheet gloss. If the results hold for the industrial paper coatings, the amount of expensive amphoteric latex can be reduced while achieving best available printing quality.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.