• 상하수도학회지
• /
• 제7권1호
• /
• pp.29-36
• /
• 1993

The complex nature of low flow mixing in natural channels has been investigated using both laboratory experiments and the numerical solution of a proposed mathematical model that is based on a set of mass balance equations describing the mixing and mass exchange mechanisms. Laboratory experiments, which involved collection of channel geometry, hydraulic, and dye dispersion test data, were conducted in a model of four pool and riffle sequences in a 49-m long tilting flume. The experimental results show that flow over the model pool-riffle sequences is highly non-uniform. Concentration-time curves are significantly skewed with long tails. Comparison between measured and predicted concentration-time curves shows good agreement in the general shape, peak concentration and time to peak. The proposed model shows significant improvement over the conventional one-dimensional dispersion model in predicting natural mixing processes in open channels under low flow conditions through pools and riffles.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.240-243
• /
• 2008

In this paper, the design of Centrifugal Compressor which is used in sizes 50 horse power has 8 pressure ratio and numerical analysis of the flow within compressor varying tip clearance length are performed. To get high pressure ratio with low power the exit height of impellers is low but compressor has very high speed of revolution. So compressor has high specific speed although mass flow rate is very small. The shape of impellers at the first stage is carried out. Flow and performance characteristics of impellers has been analyzed by using a commercial CFD program, $Fine^{TM}$/turbo. The result shows that loss coefficient is affected by tip clearance length and compressor has proper tip clearance length. It is possible to decrease loss by selecting apt tip clearance length.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 춘계 학술대회논문집
• /
• pp.35-42
• /
• 1998

Time marching algorithms applied to compressible Navier-Stokes equation have a convergence problem at low Mach number. It is mainly due to the eigenvalue stiffness and pressure singularity as Mach number approaches to zero. Among the several methods to overcome the shortcomings of time marching scheme, time derivative preconditioning method have been used successfully. In this numerical analysis, we adopted a preconditioner of K.H. Chen and developed a two-dimensional, axisymmetric Navier-Stokes program. The steady state driven cavity flow and backward facing step flow problems were computed to confirm the accuracy and the robustness of preconditioned algorithm for low Mach number flows. And the transonic and supersonic flows insice the JPL axisymmetric nozzle internal flow is exampled to investigate the effects of preconditioning at high Mach number flow regime. Test results showed excellent agreement with the experimental data.

• 대한의용생체공학회:의공학회지
• /
• 제13권3호
• /
• pp.253-262
• /
• 1992

The wall shear stress in the vicinity of end-to end anastomoses under steady flow condi- tions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experi- mental measurements were in good agreement lith numerical results except In flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compli- ance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia (ANFH) in end-to-end anastomoses.

• International Journal of Aerospace System Engineering
• /
• 제4권2호
• /
• pp.5-9
• /
• 2017

In a pressurized fuel supply system of aircraft, a flow passage opening device is required to keep fuel continuously transferred from one tank to the other. The device utilizes balancing weights in order to follow up an acceleration at special conditions such as negative g. It is very difficult to test the device in a real high-speed and high-altitude test since severe test conditions and expensive supports are needed. Therefore, this paper deals with performance analysis of a flow passage opening device through low speed aircraft captive flight tests (CFT) including roll and negative-g maneuvers. It is shown that balancing weights in the device can open the passage in accordance with fuel position.

• 설비공학논문집
• /
• 제11권6호
• /
• pp.733-739
• /
• 1999

A modified low-Re $k-\varepsilon$ model is used for the calculation of drag-reducing turbulent flow by polymer injection in a pipe. With the viscoelastic model, molecular viscosity in the definition of turbulent viscosity is related to elongations viscosity of the solution to account for the effects of drag reduction. Finite volume method is used for the discretization, and power-law scheme is used as a numerical scheme. Computed dimensionless velocity profiles are in good agreements with the experimental data in case of low drag reductions. However, in case of high drag reductions, they deviate largely from the measurements in the central zone of the flow field.

• 대한설비공학회지:설비저널
• /
• 제4권2호
• /
• pp.119-128
• /
• 1975

Natural draft and flow which low temperature moist gas produces in the chimney of an Ondol heating system were numerically analysed. Among several factors involved inlet gas temperature has the strongest influence on the chimney performance and then next specific humidity of the gas. Thermal conductivity of the chimney wall, however, has little influence on the performance of such a low temperature chimney. Under given flow conditions there exists an optimum chimney height which gives a maximum flow rate for a given chimney diameter. This optimum value of chimney height inereases with increase in chimney diameter, inlet gas temperature and specific humidity.

• 한국유체기계학회 논문집
• /
• 제7권4호
• /
• pp.7-15
• /
• 2004

The design point of the cross-flow fan is generally based on the region within low static pressure and high flow rate. It relatively makes high dynamic pressure at low speed because a working fluid passes through an impeller blade twice. However, it has low static pressure efficiency between $30\%$ and $40\%$ because of relative high impact loss. The purpose of this study is to research the reciprocal relation among each parameter. Experiments and numerical analyses are conducted on effects of a stabilizer and a rearguider on performance analysis of a cross-flow fan. Two-dimensional, unsteady governing equations are solved using FVM, PISO algorithm, sliding grid system and standard $k-{\epsilon}$ turbulence model. Experiments are also carried out to estimate the performance of the modeled cross-flow fan. It is clarified that the rearguider of Archimedes type has excellent results for the most part.

• 마케팅과학연구
• /
• 제17권2호
• /
• pp.1-29
• /
• 2007

본 연구에서는 플로우 4경로모형에서 마음상태와 플레이(play)가 하는 역할과 그 결과를 분석하고자 하였다. 이를 위해서 선행요인인 도전감 및 숙련도의 조합에 따른 마음상태를 측정하고, 플레이를 플로우 4경로모형에 투입하여 플로우이론에서 가설적으로 제시하고 있는 마음상태와 플레이의 영향관계를 분석하였다. 또한 플로우와 플레이의 웹충성도에 대한 영향도 분석하였다. 가설검정 결과에서는 첫째, 도전감과 숙련도의 조합에 따라 플로우, 두려움, 지루함, 무관심의 마음상태가 형성되는 것이 확인되었다. 그러나 두려움의 수준은 도전감과 숙련도가 모두 가장 낮은 무관심집단에서 가장 높게 나타났다. 이런 결과는 플로우이론의 설명과 일치하지 않는데, 무관심집단은 두려움으로 인해 온라인 쇼핑을 회피하는 것으로 해석할 수 있다. 둘째, 도전감과 숙련도에 따라 구분된 집단 간에 플레이 수준에서 유의적인 차이가 있는 것으로 나타났다. 셋째, 플레이는 플로우에 대해서는 정(+)의 영향을 미쳤고, 지루함에 대해서는 부(-)의 영향을 미쳤다. 그러나 두려움과 무관심에 대해서는 부(-)의 영향효과가 유의적이지 않았다. 넷째, 플레이와 플로우는 웹충성도에 유의적인 정(+)의 영향을 미치는 것으로 나타났고, 부정적 마음상태인 두려움, 지루함, 무관심은 웹충성도에 부(-)의 영향을 미쳤다. 플레이의 웹충성도에 대한 영향은 부정적 마음상태에서 강화되는 것으로 나타났다. 본 연구에서는 플로우 4경로모형에서의 마음상태를 확인하기 위해 이를 측정할 수 있는 척도를 개발하여 사용하였다. 마음상태별로 수립한 4개의 구조방정식 모형을 통해 플로우 뿐만 아니라 두려움, 지루함, 무관심의 부정적 마음상태에서 발생하는 영향관계를 종합적으로 입증하였다. 이런 결과는 부정적 마음상태의 영향을 확인하였다는 점에서 이론발전에 기여하였다고 본다. 또한, 플로우모형에서 플레이의 역할을 규명하였다는 점에서도 의미가 있다. 본 연구는 실무적으로도 인터넷 소비자들의 마음상태에 따른 시장세분화와 플레이를 활용한 마케팅전략수립에 시사점을 제공한다.

• Nuclear Engineering and Technology
• /
• 제44권4호
• /
• pp.429-436
• /
• 2012

Critical heat flux (CHF) is the thermal limit of a phenomenon in which a phase change occurs during heating (such as bubbles forming on a metal surface used to heat water), which suddenly decreases the heat transfer efficiency, thus causing localized overheating of the heating surface. The enhancement of CHF can increase the safety margins and allow operation at higher heat fluxes; thus, it can increase the economy. A very interesting characteristic of nanofluids is their ability to significantly enhance the CHF. Nanofluids are nanotechnology-based colloidal dispersions engineered through the stable suspension of nanoparticles. All experiments were performed in round tubes with an inner diameter of 0.01041 m and a length of 0.5 m under low pressure and low flow (LPLF) conditions at a fixed inlet temperature using water, 0.01 vol.% $Al_2O_3$/water nanofluid, and SiC/water nanofluid. It was found that the CHF of the nanofluids was enhanced and the CHF of the SiC/water nanofluid was more enhanced than that of the $Al_2O_3$/water nanofluid.