• Asian Journal of Turfgrass Science
• /
• v.25 no.2
• /
• pp.138-146
• /
• 2011

This study was carried out to select salt tolerant zoysiagrass breeding lines. Eighty two native zoysiagrasses collected from S. Korea were used in this study. Saline water were prepared by mixing sea water and tap water. ECw levels of saline water treated ranged from 2 to $3dS{\cdot}m^{-1}$. Zoysiagrass planted in pot by sprigging were soaked into the plastic box containing saline water. Winter injury was investigated under the pot condition. Most of Z. japonica types did not show winter injury. But Z. tenuifolia type, Z. matrella type, and Z. sinica type showed winter injury under the pot condition at Cheonan area. NaCl level in soil was increased from 0% to 0.51% by treatment of saline water. Soil ECe measurement showed upto $170dS{\cdot}m^{-1}$. Z. tenuifolia type (Z5034), Z. matrella type ('Konhee', Z4109, 'Semill'), Z. japonica type (Z1055, Z1040, Z1008, 'Zenith', 'Millock') and medium leaf type zoysiagrass (Z6096, Z6118, Z6021, Z6074) resulted in below 30% leaf firing under the saline condition. This approach might be useful for selecting salt tolerant breeding lines.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.7
• /
• pp.722-728
• /
• 2015

The demand for shipboard energy management is expected to gradually increase based on ship energy efficiency management plans (SEEMPs), which have been in use since January 1, 2013. Therefore, the fuel consumption of the main engine, which occupies the greatest portion of the energy used, along with elements related to the engine power, should be strictly monitored. There are many different methods for indicating the engine power. However, this study performed an experiment to monitor the status of a ship's engine power in real time using an encoder and a proximate switch, which are economical to purchase and easy to install. In the experiment, the angular velocity during one cycle of a two-stroke low-speed engine was measured, and the measured data were converted to the torque fluctuation. The angular velocity during an abnormal firing condition in the cylinder was also measured, and the torque fluctuation as a result of a misfire was considered. The results were compared with sea trial data to determine the reliability. In this study, the status of the engine power was determined using the torque fluctuation of the main engine in an operating ship.

• Progress in Medical Physics
• /
• v.18 no.2
• /
• pp.73-80
• /
• 2007

Fruitful findings have been produced from five out of sixty cells which were obtained from each 63 individual Aplisia caught at the Jeju coast. Spiking patterns of three out of five cells, such as relaxation oscillator, bursting within a short time of the inter-burst interval, chaotic bursting, period doubling sequences, bursting with long trains of action potentials separated by short silent periods, regular repeated beating or elliptic bursting, and silent states had been changed in order as the temperature was lowered to $10^{\circ}C\;from\;32^{\circ}C$. In the intervals of every about 40 minutes repeated ups and downs of temperature produced similar firing patterns at the allowable temperature ranges. The other two cells showed difference from these. The amplitudes of the action potentials of the two cells will not be highly decreased in 24 hours. Average spike frequencies, the inter-burst interval, peak to peak spike amplitude of action potentials, minimum potential values are compared and analyzed by using the computer programme. The spike frequencies according to temperature show the distribution of bell type, with maximal spike frequencies at intermediate temperatures and minimal ones at either end. The most common pattern consist of high spike frequency during failing and low one during rising temperatures.

• Korean Journal of Materials Research
• /
• v.23 no.4
• /
• pp.233-239
• /
• 2013

We collected Seokganju minerals (regions in Gyeryong Mountain, Sangsin-ri, Banpo-myeon, Gongju Chungcheongnam-province), which were used as natural color pigments for grayish-blue during the 15th~16th centuries of the Joseon era, and investigated their crystallographic features to develop a black pigment having a spinel structure. By a Raman analysis, the color of Seokganju under transparent glaze as a pigment for painting was black because hematite ($Fe_2O_3$) in Seokganju was converted to magnetite ($Fe_3O_4$) However, Seokganju into the transparent glaze as a pigment was brown because of hematite ($Fe_2O_3$) and small amounts of maghemite (${\gamma}-Fe_2O_3$) in Seokganju minerals. Only Seokganju mineral is used, it is not suitable for black pigment into the transparent glaze. This study tried to develop a spinel crystal black pigment stabilized by Seokganju with CoO, $Cr_2O_3$, NiO, and $MnO_2$ at $1280^{\circ}C$. A Raman spectroscopy analysis was performed to verify the presence of Mn The results showed that it existed as spinel, and two crystal phases $CoFe_2O_4$ and $MnFe_2O_4$ were mixed. $CoFe_2O_4$ spinel has a dark grayish black color and $MnFe_2O_4$ spinel has a greenish black color, and these two appeared as black. The color of a specimen calcined by adding 6 wt% of pigment mixed with 5 wt% of $MnO_2$ added to lime glaze was analyzed with a UV spectrophotometer. When applying the color pigment, it appeared black stabilized with $L^*$24.23, $a^*$ 0.12, $b^*$ -2.29 at $1260^{\circ}C$ oxidative calcination, With $1240^{\circ}C$ reduction firing, it is appeared black stabilized with low brightness of $L^*$ 23.13, $a^*$ -1.12, $b^*$ 0.54.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.316-327
• /
• 1997

Polycrystalline $Sr_{2}Nb_{2}O_{7}$ and $La_{2}Ti_{2}O_{7}$ ceramics with very high Curie temperatures were synthesized by the chemical coprecipitation method (CCP). The powders synthesized were identified by XRD and their sintering behavior and physical properties were studied. The grain-orientation and electrical properties of sintered ceramics were investigated as a function of firing temperature. Single phase could be obtained by CCP method at temperature lower than that of the conventional method by 100 - $150^{\circ}C$. Strontium niobate, $Sr_{2}Nb_{2}O_{7}$, powder was Prepared by CCP method at temperatures as low as $800^{\circ}C$ via intermediate phase of $Sr_{5}Nb_{4}O_{15}$ formed at $700^{\circ}C$. The resulting CCP-derived powder was observed to have finer and more uniform particle size distribution than those obtained through the conventional or the molten salt synthesis method. Sintering of CCP-derived $Sr_{2}Nb_{2}O_{7}$ powder at $1500^{\circ}C$ yielded a highly dense ceramics with 97% theoretical density. Very high grain-orientation developed along the (0k0) direction was observed by SEM, which resulted in anisotropic dielectric properties of the sintered samples, with the dielectric constant values approaching those for single crystal.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.12-19
• /
• 1995

This study was carried out to remove the iron and impurities usmg hydrocyclone and HGMS for recycling of sludge from the granite stone cutting and polishing industrγ in the basic of chemi떠1 analysis and minerallogical investigation. This sludge consist of 70.9% $SiO_2$ 13.6% $Al_2O_3$ and It also contained 2.52% of $Fe_2O_7$ and 0.29% of $TiO_2$, as a main impurities to decrease the whiteness. As the result of hydrocyclone experiment, It was very good condition that are 100~150 g/l of sludge amount, 2.0~ 2.5 mm of underflow nozzle size, and 1.2~1.6 kg/$\textrm{cm}^2$ of pressure for 85% sludge product with the $-37{\mu}\textrm{m}$ size. $Fe_2O_3$ and $TiO_2$, contents by treatment of HGMS were decreased with 0.65% and 0.07% each at 10,000 gauss of magnetic field strength, and addih$\upsilon$n of Sodium tripolyphosphate as a dispersant was effected to get low grade F Fe,Ol and TiO, concentrate. PhYSIcal properties of this stone sludge product were showed 58.5% of whiteness, 1 13.4% of firing shrinkage and 3.0812 $\textrm{m}^2$/g of specific surface area.

• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.63-76
• /
• 2021

The purpose of this study is to scientifically analyze physicochemical characteristics of the roof tiles used for palaces in the Joseon Dynasty which stored in Changdeokgung material storage and Seooreung Jaesil and the modern handmade ones which made by N company to understand the differences between their manufacturing techniques. Through chromaticity, cross-sectional observation, component analysis, and crystal structure analysis, it was possible to confirm the physicochemical properties and fired properties of the roof tile. Roof tiles from the Joseon Dynasty have a wider colorimetric range and higher apparent porosity and water absorption, on average, than the modern roof tiles. The cross section of the Joseon Dynasty roof tiles shows that most clay minerals have not been vitrified, remaining in the form of atypical particles, while the modern roof tiles have denser clay materials. X-ray diffraction analysis identified low-temperature minerals such as micas in Joseon roof tiles but no peak of these minerals was observed in the modern roof tiles, implying that the modern ones are fired at higher temperature than the Joseon ones. Therefore, the modern roof tiles are fired at higher temperature and have higher density than the Joseon ones due to the use of pugmills. The general content of main ingredients was similar between the two. Additionally, the principal component analysis of trace elements in the Joseon roof tiles showed that most samples were from similar areas. It seems that the Joseon roof tiles were manufactured using soils supplied from a specific region at the same timeframe and their consistency in the content of principal components implies that they also have similar mix proportions of clay.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.807-820
• /
• 2021

A study on the Joseon Dynasty's furnace walls, excavated from south Korea, was conducted to identify the correlations and differences of the furnace walls found in Jeolla and Gyeongsang regions. Three ruins in the Jeolla region and two in the Gyeongsang region were selected for the analysis. The results showed a layer change depending on the degree of plasticity and difference in the number of layers and particle phase. Furthermore, although the temperature to be subjected to heat was divided into 1300℃ and 1100℃, it was not a phenomenon that appeared according to the region. Additionally, analysis result of major components revealed that the TiO₂ content of most samples does not exceed 1wt%, This means that the furnace did not smelt iron sand or smelted it into low-titanium sand. This study indicated a slight similarity between the furnace walls found in the two regions, and the correlation was determined based on the nature of the ruins, raw materials of the metals ores, and composition of the raw materials constituting the furnace walls.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.17-25
• /
• 2022

The pintle injector has many advantages in the key characteristics of a liquid rocket engine, such as combustion stability, combustion efficiency, and wide range of comprehensive thrust control, design and manufacture, and test fired under supercritical conditions. The pintle injector is manufactured with a rectangular, single-row orifice for thrust control and production considerations. In order to verify the combustion performance of the pintle injector and its potential as a commercial injector, the combustion characteristics were analyzed by varying the TMR (Total Momentum Ratio) and BF (Blockage Factor). The result of the hot firing test showed that the heat flux increased as TMR increased, and it confirmed that the characteristic velocity efficiency was more affected by BF than TMR. Suppose a single-row pintle injector with efficiency characteristics insensitive to changes in TMR can achieve high efficiency at low fuel differential pressure conditions. In that case, the variable pintle injector's design flexibility can be increase.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.3
• /
• pp.280-285
• /
• 1991

The rice culture techniques of the ancient China which have played a key role directly and indirectly, in development of ancient farming and its techniques of Korea, were established before Christ in terms of dry-farming and the spirit of the farming-first principle. Especially techniques of rice culture were developed by cultivation methods for deep plowing, storage of water and preservation use of soil fertility. Therefore, the techniques of transplanting methods, seeding in rows, use of iron-made farming tools and dam construction for irrigation were advanced. And rice varieties were differentiated to avoid disasters or to supply of rice for various uses in many areas. Also, because north China was the origin of Chinese agriculture in which population density was low and flat land was wide that were the cradle of Chinese agriculture, ‘Hwayungsunubeob’(firing and drawning weed control method) and fallowing were quickened as intensive techniques of rice culture. In connection with the view of agricuture with 'the theory of the cosmic dual forces and the five primary substances' of Han Mooje and Chamwye scholars, the techniques of seeding and selection of crops were gradually developed. From ‘Jeminyosul’ of the 6th century to ‘Wangjongnongseo’ of the 14th century, the techniques of rice culture have been developed continuously and additively, but were not improved thereafter Won dynasty. From this point of time, the time of agriculture in the end of Koryo age and by ‘Nongsajiksul’ were initiated.