• Journal of the Korean Ceramic Society
• /
• v.40 no.11
• /
• pp.1102-1105
• /
• 2003

The fiber drawing process induced defects in silica fiber have been investigated. This study has focused on the Oxygen Deficient Centers (ODCs) and E' centers induced by the fiberization process in low-OH silica fibers. To investigate those defects induced by the fiberization process, the optical absorption spectrum and Electron Spin Resonance (ESR) have both been employed. The concentration of Oxygen Deficient Centers (ODCs) and E' centers are increased by the fiber drawing process. The population of defects in the neck-down region has also been investigated. The most significant generation of defects during fiber drawing process has been shown to occur in this region of silica preform. The population of defects is higher on the edge region than in the center of neck-down region.

• Elastomers and Composites
• /
• v.56 no.3
• /
• pp.152-163
• /
• 2021

Liquid butadiene rubber (LqBR) is used as a processing aid and plays a vital role in the manufacture of high-performance tire tread compounds. In this study, center-functionalized LqBR (C-LqBR) was polymerized with different vinyl content via anionic polymerization. The effects of the vinyl content on the properties of the compounds were investigated by partially replacing the treated distillate aromatic extract (TDAE) oil with C-LqBR in silica-filled rubber compounds. C-LqBR compounds showed a low Payne effect and Mooney viscosity regardless of the vinyl content, because of improved silica dispersion due to the ethoxysilyl group. As the vinyl content of C-LqBR increased, the optimum cure time (t₉₀) increased owing to a decrease in the number of allylic hydrogen. Moreover, the glass transition temperature (T_g) of the compound increased, and snow traction and abrasion resistance performance decreased, whereas wet grip improved. The energy loss characteristics revealed that the hysteresis attributed to the free chain ends of C-LqBR was dominant.

• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.202-206
• /
• 2018

Five solution styrene butadiene rubber/neodymium butadiene rubber (SSBR/NdBR) composites were manufactured using different ratios of SSBR and NdBR. In this study, the composites were reinforced with NdBR and silica to confirm the physical properties of SSBR used for treads of automobile tires and the dispersibility with silica. The morphologies of the rubber composites were observed using field-emission scanning electron microscopy (FE-SEM). The crosslinking behaviors of the composites were tested using a rubber process analyzer (RPA), and the abrasion resistances were tested using a National Bureau of Standards (NBS) abrasion tester. The hardness values, tensile strengths, and cold resistances of the composites were also tested according to ASTM standards. Increased NdBR content yielded composites with excellent crosslinking properties, abrasion resistances, hardnesses, tensile strengths, and cold resistances. The crosslinking point increased due to the double bond in NdBR, thereby increasing the degree of crosslinking in the composites. The NdBR-reinforced composites exhibited excellent abrasion resistances, which is explained as follows. In SSBR, a breakage is permanent because a resonance structure between styrene and SSBR forms when the molecular backbone is broken during the abrasion process. However, NdBR forms an additional crosslink due to the breakdown of the molecular backbone and high reactivity of the radicals produced. In addition, the low glass transition temperature (Tg) of NdBR provided the rubber composites with excellent cold resistances.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.176-177
• /
• 2021

In order to compensate for the defects of concrete made using only Portland cement, three-component powder mixed with blast slag and fly ash, and four-component powder concrete mixed with silica fume are being produced. When each of the admixtures is used alone, the above-described excellent performance is expressed and up to 70% of the powder is used. These technologies are also contributing to the reduction of greenhouse gases under Act on Low Carbon. Green Growth. However, calcium hydroxide is consumed as a stimulator or reaction in the case of silica fume, which causes latent hydroponicity of slag, pozzolane reaction, and silica mixtures represented by fly ash. It is known that the consumption of calcium hydroxide affects the alkalinity of concrete. As a result, the carbonation resistance is significantly lower among the durability of concrete. Research on quantification of such effects is insufficient. In this study, an experiment was conducted to quantify calcium hydroxide of the three-component and four-component powder paste using thermal analysis equipment (DTG), and the effect of the mixing amount was discussed.

• Journal of the Korean Ceramic Society
• /
• v.55 no.3
• /
• pp.285-289
• /
• 2018

We synthesized silicon carbide (${\beta}-SiC$) nanowires with nano-scale diameter (30 - 400 nm) and micro-scale length ($50-200{\mu}m$) on a porous body using low-grade silica and carbon black powder by carbothermal reduction at $1300-1600^{\circ}C$. The SiC nanowires were formed by vapor-liquid-solid deposition with self-evaporated Fe catalysts in low-grade silica. We investigated the characteristics of the SiC nanowires, which were grown on a porous body with Ar flowing in a vacuum furnace. Their structural, optical, and electrical properties were analyzed with X-ray diffraction (XRD), transmission electron microscopy (TEM), and selective area electron diffraction (SAED). We obtained high-quality SiC single crystalline nanowire without stacking faults that may have uses in industrial applications.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.435-436
• /
• 2009

The objective of this study was to develop the high-durable concrete which is mixed silica fume and fly ash in post-tensioned concrete pavement. Test results show that early-age compressive strength was increased with addition of silica fume. Water-permeability was improved significantly comparing with standard concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.63-64
• /
• 2011

This study is about the mortar in which fine aggregate is substituted by low-carbon eco-friendly inorganic composite prepared by addition of alkali accelerator in industrial by-products such as blast furnace slag, red mud and silica fume as a replacement for cement. Results of experiments on flow and strength properties in mortar of inorganic composite according to replacement rate of fine aggregate showed that amount of air and table flow decreased as replacement rate of fine aggregate about inorganic composite got higher. Also, it's shown that the compressive strength was the highest at replacement rate 50% of fine aggregate about inorganic composite.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.2
• /
• pp.126-129
• /
• 1995

Linear and nonlinear optical properties of CuCl nanocrystals in silica glass have been studied using low temperature absorption, degenerate four wave mixing (DFWM), and time-resolved photoluminescence spectroscopy. Assuming a spherical shape, effective radius of the CuCl quantum dots was estimated to be 2.5 nm, which is obtained from low temperature absorption data. The DFWM experiment was performed in 380-386 nm wavelength region, and the diffracted signal was measured as a function of wavelength with 1.0 nm interval. Time-resolved photoluminescence measurement was also carried out at 77 K to obtain the time response of CuCl nanocrystals. The experimental results on the large third order nonlinear optical of CuCl quantum dots are explained in terms of crystal size and oscillator strength of quantum spheres.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.5 no.1
• /
• pp.104-118
• /
• 1995

This study was performed to evaluate factors affecting desorption of organic solvents collected on charcoal tube and to find out the optimum condition. Desorption efficiency for polar analytes was improved when several polar desorption solvents such as methanol, dimethylformamide(DMF), 2-(2-butoxyethoxy)ethanol were added to carbon disulfide($CS_2$). The best improvement was achieved when 10% dimethylformamide(DMF) in $CS_2$ was used as desorption solvent. During storage of polar analytes, recovery was greatly reduced. Especially, the recovery of cyclohexanone was decreased to 18.1 % after a month storage at $34^{\circ}C$. After two weeks storage, recovery of polar analytes was sharply decreased. Water adsorbed on charcoal interfered the recovery of polar analytes but didn't interfere that one of nonpolar solvent, toluene. When 10% DMF in $CS_2$ was used as desorption solvent, the effect of water on recovery was decreased, comparing with Desorption efficiency increased when analyte loading increased, and usage of 10% DMF in $CS_2$ decreased the loading effect. Increasing volume of desorption solvent was not effective to improve desorption efficiency of analytes when 10% DMF was used. Continuous shaking and sonication is not helpful to increase the desorption efficiency of analytes except cyclohexanone using 10% DMF. When silica gel used as adsorbent, methanol was better desorbent than dimethylsulfoxide. Analytes adsorbed on silica gel showed high recovery in low concentration and less affected by humidity. On the basis of this study, the following conclusions have been drawn. To improve the recovery of polar organic materials in air samples, it is necessary to analyze samples as soon as possible after they were collected. Otherwise, samples must be stored at low temperature. Using two components of desorption solvents, such as 10% DMF in $CS_2$, the effects of loading and humidity decreased for polar analytes such as methyl ethyl ketone and methyl isobutyl ketone. When work place has high humidity with low concentration of polar organic solvents, silica gel can be used as adsorbent, because it produces quantitative recovery for polar analytes at this condition. But it should be noted that high humidity makes breakthrough easy in silica gel samples.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.128.1-128.1
• /
• 2000