• Journal of Advanced Marine Engineering and Technology
• /
• 제24권4호
• /
• pp.427-434
• /
• 2000

In tradition, there have been two kinds of drying methods, which are sun drying and artificial drying. The sun drying method which has been adopted traditionally has been replaced by the hot-air drying method which is one of the most general methods of artificial drying, with its simple drying system, low initial cost of drying plant, and easy operating method. But the hot-air drying method has some defects; (1) much energy loss happens due to the discharge of hot air during the drying process, (2) control of drying rate is not easy on account of changing relative humidity of inlet air for uniform hot air temperature, (3) high temperature of foods in drying process brings about the production of low-grade drying products. Vacuum drying takes advantage of energy saving and mass production because it reduces the drying time by increasing the drying rate under low temperature condition. The aim of this paper is to develop the low temperature vacum dryer, with low initial investments and operating costs, easy operating method and trouble-free operation.

• 한국가스학회지
• /
• 제21권3호
• /
• pp.61-69
• /
• 2017

생산성을 증대시키는 기술의 발달로 상업적인 생산이 가능해진 비전통 가스에 대한 개발이 북미를 중심으로 진행되고 있다. 셰일 저류층은 유체투과도가 낮으며, 일반적인 석유자원과 달리 수압파쇄로부터 생성된 균열을 통해 가스 생산이 이루어지므로 초기의 생산 감퇴율이 큰 반면 후반부에서는 감퇴하는 변화율이 매우 작은 특징을 나타낸다. 이러한 셰일가스의 생산량 변동성으로 인해 단일 예측값을 산출하는 생산감퇴곡선분석기법을 생산량 자료 분석에 적용할 경우 불확실성을 고려하기 어렵다. 이 연구에서는 미국 Eagle Ford 지역의 생산정 자료에 대하여 확률론적 기법 중 하나인 몬테카를로 시뮬레이션을 적용하였으며, 생산감퇴곡선인자에 대한 난수발생 시 핵밀도 함수를 활용하여 분포에 대한 가정 없이 자료의 특성을 반영한 확률분포를 도출하였다. 또한, 일반적으로 사용되고 있는 Arps 쌍곡선함수와 치밀/셰일층의 특성을 고려하여 생산량 예측이 가능한 Modified SEPD 적용에 있어 단일값이 아닌 확률에 따른 궁극가채량을 예측함으로써 불확실성을 최소화하고자 하였다.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.3071-3079
• /
• 2023

Helium production in the nuclear fuel matrix during irradiation plays a critical role in the design and performance of Gen-IV reactor fuel, as it represents a life-limiting factor for the operation of fuel pins. In this work, a surrogate model for the helium production rate in fast reactor MOX fuels is developed, targeting its inclusion in engineering tools such as fuel performance codes. This surrogate model is based on synthetic datasets obtained via the SCIANTIX burnup module. Such datasets are generated using Latin hypercube sampling to cover the range of input parameters (e.g., fuel initial composition, fission rate density, and irradiation time) and exploiting the low computation requirement of the burnup module itself. The surrogate model is verified against the SCIANTIX burnup module results for helium production with satisfactory performance.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.441-452
• /
• 2018

Purpose: The purpose of this paper is to study quantitative risk grade assessment for objective government quality assurance activities based on risk management in initial mass production for weapon systems. Methods: The Defense quality management regulations and foreign risk assessment documents are referred to analyze problems performing quality assurance actives. The failure rate data, maintainability and cost of products have been studied to quantify the risk Likelihood and impact. The analyzed data were classified as risk grade assessment through K-means Cluster Analysis method. Results: Results show that a proposed method can objectively evaluate risk grade. The analyzed results are clustered into three levels such as high, middle and low. Two products are allocated high, eleven low and seven middle. Conclusion: In this paper, quantitative risk grade assessment methods were presented by analyzing risk ratings based on objective data. The findings showed that the methods would be effective for initial mass production for weapon systems.

• KSBB Journal
• /
• 제13권3호
• /
• pp.284-288
• /
• 1998

Production of inulo-oligosaccharides from inulin was carried out with the maximum yield of 94% using a purified endoinulinase from Aspergillus ficcum. The optimum reaction temperature and pH were 55-60$^{\circ}C$ and pH 5.5-6.0, respectively. The Michaelis constant and maximum reaction velocity of the endoinuinase for inulin were 13.27 g/L and 0.13 g/L$.$min at 55$^{\circ}C$, pH 5.5, respectively. Inulin source had no significant effect on oligosaccharide yield and product composition, although initial production rate differed according to inulin origins. The reaction pH was a critical factor in inulo-oligosaccharide production because considerable free monosaccharides were released, decreasing oligosaccharide yield at low pH conditions. An empirical relationship describing the reaction performance was developed from kinetic data: the time to reach maximum oligosaccharide yield (tw) as a function of initial concentration of inulin (lo) and enzyme (Eo); i.e., log tM = -1.025 log Eo - 0.011 l0 + 2.655.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권1호
• /
• pp.10-15
• /
• 2002

Environmental and medium factors were investigated as basic data for optimizing DHA production when using Thraustochytrium aureum. To study the effect of environmental conditions, the rotation speed and culture temperature were changed. Plus the trend of the growth characteristics, lipid content in the biomass, and DHA content in lipids were evaluated according to various initial glucose concentrations. The biomass, lipid, and DHA analyses showed that the physiological characteristics of T. aureum were closely related with the environmental and medium conditions, as in the case of other marine microorganisms. For example, a low rotation speed of 50 rpm lowered the cell growth rate as well as the DHA content in the lipids. A low temperature had a negative effect on the cell growth, yet a positive effect on the lipid content in the biomass. Different initial glucose concentrations had no effect on the lipid content in the biomass or DHA content in the lipids, yet did affect the cell growth. Accordingly, these results show that environmental and medium factors must be synthetically considered in order to optimize DHA production when using T. aureum.

• 시스템엔지니어링학술지
• /
• 제11권1호
• /
• pp.67-72
• /
• 2015

It has been tested for SW reliability in order to prevent the SW error during the development of weapons systems. According to a recent report, defects such as memory leak, buffer overflow, and null deference occur usually in the development stage, but also in the mass production stage. Although it is intended to enhance the SW test and evaluation to prevent SW failures in the development stage, the non-functional problems like syntax errors are not completely revised due to the limitation of the schedule and costs. In addition, SW failure rate are usually fluctuated by the operational environment through SW upgrade in contrast with HW. In this paper, we propose a method to increase SW reliability in the mass production stage of Korean weapon systems.

• 생태와환경
• /
• 제42권4호
• /
• pp.413-421
• /
• 2009

Eleven lake sediment core samples were obtained and analyzed to develop a chronology using $^{137}Cs$ (in 1963) and two tephra layers (Ko-c2 in 1694 and Ta-a in 1739). Sedimentation rates estimated for the past ca 300 years in Lake Shirarutoro indicated that catchment development has influenced the shallowing process in the lake by increasing sediment production. The sediment yield under initial land-use development conditions for the first two periods was estimated as 514 tons $yr^{-1}$ from 1694 to 1739 and 542 tons $yr^{-1}$ from 1739~1963. The development of the Shirarutoro catchment intensified in the 1960s with deforestation and agriculture activity leading to an increased sediment yield of 1261 tons $yr^{-1}$ after 1963. The sediment yields after intensified land use development, such as forestry and agricultural development, were about 2 times higher than that under initial development conditions, leading to accelerated lake shallowing over the last ca 50 years. Sedimentation rates differed with location in the lake because of spatial variation in the sediment flux from the contributing rivers and their catchments. The sedimentation rates before 1963 were low in all sites except for one site close to the Shirarutoroetoro River. The sedimentation rate in 1739~1963 was accumulated mostly at the inflow of the Shirarutoroetoro River by sediment production associated with forestry for charcoal production and initial agricultural development. The sedimentation rate after 1963 increased. In particular, the southern zone of the lake near the conjunction with the Kushiro River had a high sedimentation rate, which is attributable to sediment inflow back from the Kushiro River during floods.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권2호
• /
• pp.226-232
• /
• 2002

In tradition, there have been two kinds of drying methods, which are sun drying and artificial drying. The sun drying method which has been adopted traditionally has been replaced by the hot-air drying method which is one of the most general methods of artificial drying, with its simple drying system, low initial cost of drying plant, and easy operating method. But the hot-air drying method has some defects ; (1)much energy loss happens due to the discharge of hot air during the drying process, (2)control of drying rate is not easy on account of changing relative humidity of inlet air for uniform hot air temperature, (3)high temperature of floods in drying process brings about the production of low-grade drying products. Also, the hot-air drying method is inducing environmental and sanitary problems which are resulting from the emission of high temperature and high humidity air, including stick on the drying progress. Vacuum drying technique, whose drying time and 7uantity of exhausting energy is about 1/3 ~1/4 of hot air drying, is very excellent in the drying efficiency. As the results, it took about 20 hours for material to reach about 18% of the final moisture content in order to store products for a long time, from about 470% of the early moisture content at the beginning of drying, and maximum drying rate comes to about $0.35 kg/m^2hr$ at about 350% of the moisture content.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권2호
• /
• pp.107-111
• /
• 2001

The addition of a limited concentration of yeast extract to a minimal salt medium (MSM) enhanced cell growth and increased the production of curdlan whereas nitrogen-limitation was found to be essential for the higher production of curdlan by Agrobacterium sp. ATCC 31749. As the amount of the inoculum increased, the cell growth as well as the production of curdlan also increased in the MSM without a nitrogen source. The cell growth and production of curdlan increased as the initial pH of the medium decreased as low as 5.0. The conversion rate and concentration of curdlan from 2% (w/v) glucose in the MSM with concentrated cells under nitrogen deletion was 67% and 13.4 g/L, respectively. The highest conversion rate of curdlan under the conditions optimized in this study was 71% when the glucose concentrations was 1% (w/v).