• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.783-790
• /
• 2018

The frequency-hopping technique is one of the spread-spectrum techniques. Frequency hopping is a communication system in which the carrier frequency channel is hopped within the wideband. Therefore, a frequency-hopping system has such advantages as antijamming and low probability of intercept. This system is often used in military communications. Because frequency-hopping signal detection is difficult, it is an important research issue. A novel detection technique is proposed that can improve detection probability. When the received signal is transformed to a frequency domain sample by fast Fourier transform, spectral leakage lowers the detection probability. This problem can be solved by using the Hamming window, and the detection probability can be increased. However, in a frequency-hopping environment, the windowing technique lowers the detection probability. The proposed method solves this weakness. The simulation results show that the proposed detection technique improves the detection probability by as much as 13 %.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.5
• /
• pp.42-48
• /
• 2008

In this paper, we have introduced a Code Division Multiplexing transmission method which is similar to OFDM and analyze ECCM performances. We have verified CDM transmission method has a good LPI performance and a feasible ECCM performance. This capability could be useful for reduction of RF interference which occurs when many equipments operate densely in small area. The equipment that uses CDM transmission method supports variable transmission rate and order-wire effectively and conveniently to user. This CDM method has similar ECCM performance comparing to serial DS method. CDM method has good multi-path signal processing capability and could be useful for mobile communication environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.1
• /
• pp.119-126
• /
• 2002

본 논문에서는 chirp 변조를 이용한 통신 시스템의 LPI(low probability of intercept)와 AJ(anti-jamming)성능을 분석하였다. 인터셉터에 DAM(delay and multiplier)과 SC(squaring circuit)가 이용된 경우 CBPSK(Chirped BPSK)의 LPI 성능을 분석하였다. 스펙트럼 확산 방식의 CBPSK와 DS/BPSK 시스템에 대한 AJ 성능을 비교 분석 및 주파수 호핑 방식의 FH/CBFSK(Chirped BFSK)와 FH/BFSK, 그리고 FH/BCM(Binary Chirp Modulation) 시스템에 대한 AJ 성능을 분석하였다. LPI 결과로, CBPSK(Chirped BPSK)은 chirp 변수인 chirp 주기($T_3$가 커질수록 좋은 LPI 성능을 보인다. AJ 결과로, PBNJ(partial band noise jammer)환경에서 CBPSK 방식이 DS/BPSK 방식에 비하여 AJ 성능이 우수하고, 마찬가지로 FH/CBFSK 방식이 FH/BFSK 방식에 비하여 AJ 성능이 우수함을 시뮬레이션으로 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.319-325
• /
• 2004

FHMA(frequency hopping multiple access) communication system has good performance for the LPI and AJ(low probability of intercept and anti-jamming) application. However, high PAPR(peak to average power ratio) happens in the base-station or the repeater system because of a large number of users. In general, predistorter is used to complete the HPA(high power amplifier) nonlinear characteristics. This paper analyzes BER performance when magnitude of IBO(input back oft) and the number of user are considered as the system parameters. In case of the SSPA(solid state power amplifier), the predistorter does not always work as a complete nonlinear compensator. We find that there is a minimum value of IBO for the predistorter to compensate for the nonlinear SSP A, which is changed as the number of user. If IBO is lower than 6 ㏈ at the user number of 16 and p=1, the system with predistorter is poorer than the one without predistorter. Only when the IBO is over 6 ㏈, predistorter does work as a nonlinear compensator. We call it as cross-over IBO value. TWTA improves the more compensation performance than SSPA because characteristic AM/AM of TWTA has more nonlinear than SSPA. At the BER=10$\^$-3/, there are SNR power gains of about 2.5 ㏈ and 3 ㏈ due to the predistorter when the numbers of users are 16 and 32, respectively.

• Journal of Communications and Networks
• /
• v.15 no.5
• /
• pp.457-463
• /
• 2013

In recent days, cooperative diversity and communication security become important research issues for wireless communications. In this paper, to achieve low probability of interception (LPI) and high throughput in the cooperative single-carrier frequency division multiple access (SC-FDMA) system, a new physical layer transmission scheme is proposed, where a new encryption algorithm is applied and adaptive modulation is further considered based on channel state information (CSI). By doing so, neither relay node nor eavesdropper can intercept the information signals transmitted from user terminal (UT). Simulation results show above new physical layer transmission scheme brings in high transmission safety and secrecy rate. Furthermore, by applying adaptive modulation and coding (AMC) technique according to CSI, transmission throughput can be increased significantly. Additionally, low peak-to-average power ratio (PAPR) characteristic can still be remained due to the uniform distribution of random coefficients used for encryption algorithm.

• Journal of Advanced Navigation Technology
• /
• v.26 no.5
• /
• pp.304-311
• /
• 2022

Although the SEAD(suppression to enemy air defenses) mission is a strategically important task in modern warfare, the high risk of direct exposure to enemy air defense assets forces to use of unmanned aerial vehicles. this paper proposes a path planning algorithm for SEAD mission for an unmanned aerial vehicle and a method for calculating the mission effectiveness on the planned path. Based on the RRT-based path planning algorithm, a low-altitude ingress/egress flight path that can consider the enemy's short-range air defense threat was generated. The Dubins path-based Intercept path planning technique was used to generate a path that is the shortest path while avoiding the enemy's short-range anti-aircraft threat as much as possible. The ingress/intercept/egress paths were connected in order. In addition, mission effectiveness consisting of fuel consumption, the survival probability, the time required to perform the mission, and the target destruction probability was calculated based on the generated path. The proposed techniques were verified through a scenario.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.2
• /
• pp.133-140
• /
• 2018

In electronic warfare(EW), low probability of intercept(LPI) radar signal is a survival technique. Accordingly, identification techniques of the LPI radar waveform have became significant recently. In this paper, classification and extracting parameters techniques for 7 intrapulse modulated radar signals are introduced. We propose a technique of classifying intrapulse modulated radar signals using Convolutional Neural Network(CNN). The time-frequency image(TFI) obtained from Choi-William Distribution(CWD) is used as the input of CNN without extracting the extra feature of each intrapulse modulated radar signals. In addition a method to extract the intrapulse radar modulation parameters using binary image processing is introduced. We demonstrate the performance of the proposed intrapulse radar waveform identification system. Simulation results show that the classification system achieves a overall correct classification success rate of 90 % or better at SNR = -6 dB and the parameter extraction system has an overall error of less than 10 % at SNR of less than -4 dB.

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.93-105
• /
• 2006

The domination of the Internet by TCP-based services has spawned many efforts to provide high network utilization with low loss and delay in a simple and scalable manner. Active queue management (AQM) algorithms attempt to achieve these goals by regulating queues at bottleneck links to provide useful feedback to TCP sources. While many AQM algorithms have been proposed, most suffer from instability, require careful configuration of nonintuitive control parameters, or are not practical because of slow response to dynamic traffic changes. In this paper, we propose a new AQM algorithm, hybrid random early detection (HRED), that combines the more effective elements of recent algorithms with a random early detection (RED) core. HRED maps instantaneous queue length to a drop probability, automatically adjusting the slope and intercept of the mapping function to account for changes in traffic load and to keep queue length within the desired operating range. We demonstrate that straightforward selection of HRED parameters results in stable operation under steady load and rapid adaptation to changes in load. Simulation and implementation tests confirm this stability, and indicate that overall performances of HRED are substantially better than those of earlier AQM algorithms. Finally, HRED control parameters provide several intuitive approaches to trading between required memory, queue stability, and response time.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.594-599
• /
• 2001

The symbol rate which is the main feature of NRZ information signal is detected by DAM (Delay-And-Multiplier) receiver. It is important for secure communication to reduce the normalized output SNR which is calculated at the DAM output as a measure of detectability. In this paper, we use the signal which is modulated by the class of MSK modulation schemes as the input signal of the DAM receiver for analyzing LPI performance and the GMSK(BT=0.3) used in GSM system is highlighted. Consequently, GMSK which has better bandwidth efficiency than other modulation schemes(BPSK, QPSK, OQPSK, and MSK) has better LPI performance compared with other ones. To compare the performances of each modulation scheme fairly, the transmitted powers of each system are set to be same within useful bandwidth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.6
• /
• pp.733-738
• /
• 2014

In this paper, the performance of the narrowband channelized radiometer that have a short detection time and high time-resolution was verified based on the theoretical formula. According to the simulation result, the channelized radiometer showed 2.5 dB superior detection performance compared to the broadband radiometer, but is more sensitive to the effects of noise than the broadband radiometer. Also the signal-to-noise of a channelized radiometer was changed dramatically according to the hop rate and jitter effect, which is linearly decreased as the change of two parameters.