• 제목/요약/키워드: Low Power Test

검색결과 1,418건 처리시간 0.038초

IPMC 작동기의 기계적 물성에 관한 연구 (A Study on Mechanical Properties of IPMC actuators)

  • 김홍일;김대관;한재흥
    • Composites Research
    • /
    • 제20권3호
    • /
    • pp.50-54
    • /
    • 2007
  • 본 연구에서는 IPMC의 기본적인 기계적 특성을 알아보았다. 기전폴리머의 한 종류인 IPMC는 굽힘형 작동, 가벼움, 저전력 소모, 유연성 등의 많은 장점을 가진 재료이다. 따라서 IPMC는 생체모방형 작동기와 센서로서 많은 가능성을 가지고 있다. 이런 가능성을 바탕으로 IPMC를 실제로 응용하기 위하여 IPMC의 변형, 구동력, 주파수 응답 등 기본적인 기계적 특성을 연구하였다. 우선 이온교환폴리머의 한 종류인 네피온 용액을 사용하여 여러 가지 두께의 네피온 막을 만들고, 무전해 도금을 통해 IPMC를 제작하였다. 이렇게 제작된 IPMC의 규격, 인가 전압에 따른 변형, 구동력, 주파수 응답 특성에 관한 실험을 수행하고, 실험 결과를 통해 IPMC 성능의 실험식과 등가 강성 모델을 수립하였다.

대학 펜싱선수들의 심리교육 효과: 자원동원성 수준에 따른 심리기술과 자기관리행동의 변화를 중심으로 (The change of Psychological skills strategy and Self-management behavior according to the level of Resourcefulness of Fencing-Athlete)

  • 이현영;장덕선
    • 한국체육학회지인문사회과학편
    • /
    • 제54권5호
    • /
    • pp.251-260
    • /
    • 2015
  • 본 연구에서는 대학 펜싱선수들을 대상으로 심리교육을 중재한 후 자원동원성 수준에 따라 심리기술과 자기관리행동이 어떻게 변화하는지 탐색하여 참여자의 심리적 역량에 따른 중재의 효과성을 검증하고자 하였다. 대학 펜싱 선수(남 10명, 여 10명) 20명을 연구 참여자로 선정하였으며, 심리교육은 지도자와 참여자에게 동의를 구한 후 팀의 훈련 및 시합일정을 고려하여 12회기를 실시하였다. 시행시간은 주 1회, 60-90분 정도 소요되었으며, 심리 교육의 효과를 확인하기 위하여 1회기와 12회기에 자원동원성, 심리기술, 자기관리행동을 탐색하였다. 특히 자원동원성은 연구 참여자들의 사전 평균점수를 기준으로 고/저 집단으로 나누어 분석에 활용하였다. 연구 결과는 다음과 같다. 첫째, 자원동원성 고집단에서는 심리기술 하위요인 중 집중력, 심상에서 유의미한 변화를 보였으며, 저집단에서는 극복의지, 목표설정, 자신감, 집중력, 심상 요인에서 유의미한 변화를 나타내었다. 둘째, 자원동원성 고집단에서는 자기관리 하위요인 중 몸관리에서 유의미한 변화를 보였고 자원동원성 저집단에서는 훈련관리에서 유의미한 변화를 보여 자원동원성 수준에 따라 다른 변화를 보였다.

유동성 뒷채움재로 사용하기 위한 플라이에쉬-폐주물사 혼합재료의 특성 연구 (Engineering Properties of Fly Ash-WFS Mixed Materials as a Flow able Backfill)

  • 이관호;이인모;조재윤;윤여준
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 봄 학술발표회 논문집
    • /
    • pp.489-496
    • /
    • 1999
  • The objective of this study is to present engineering properties required in use of co-mixtures of fly ash and WFS(Waste Foundry Sand)'s, which are Presently used as fill or (lovable backfill. The fly ash, generated at the Tae-An thermoelectric power plant was used in this research and was classified as Class F. Green Sand, Furane Sand, and Coated Sand, which had been used at a foundry located in Pusan, were used. Laboratory experiments were peformed to obtain the physical properties of the co-mixture of fly ash and WFS. The range of permeability for all the co-mixtures was from 3.0×10/sup -3/㎝/s to 6.0×10/sup -5/㎝/s. The unconfined strength of the 7-day cured specimens composed of Green Sand reached 94% of that of 28-day cured specimens but for the 7-day cured specimens composed of, respectively, Furnace Sand and Coated Sand, only 64% and 66% of the strength of the 28-day cured specimens were reached. Results of the consolidated-untrained triaxial test showed that the specimens composed of Furnace Sand showed a distinct increase of the internal friction angle, while the other specimens showed negligible increase. In the case of 28-day cured specimens, specimens composed of Furnace Sand showed an internal friction angle of 41.8°, while specimens of Green and Coated Sand showed those of 33.5° and 35.0°, respectively. From the shrinkage test, the shrinkage ratios of all specimens did not exceed 0.25%.

  • PDF

Mobile Multimedia 지원을 위한 Embedded Processor 구조 설계 (Design of Embedded Processor Architecture Applicable to Mobile Multimedia)

  • 이호석;한진호;배영환;조한진
    • 대한전자공학회논문지SD
    • /
    • 제41권5호
    • /
    • pp.71-80
    • /
    • 2004
  • 본 논문은 mobile platform에서 사용될 Multimedia 적용을 위한 embedded Processor의 기본 구조 연구에 관한 내용으로 MPEG4 응용에 적합한 processor의 기본 구조 그리고 mobile platform에 적용될 수 있는 energy efficiency를 고려한 구조설계를 주 내용으로 하고 있다. multimedia 응용 embedded processor의 기본 구현 구조 요소인 processor data path architecture(pipeline, branch prediction, multiple issue superscalar, function unit number)의 기본 구조 설정과 cache hierarchy와 그 구성의 적합한 예상구조를 설정하기 위해 본 논문에서는 multimedia 응용 프로그램인 MPEG4를 processor simulator의 test bench로 사용하여 다양한 구조에 대한 simulation을 수행하였다. 그리고 mobile platform 적용에 적합한 구조인지에 대한 문제를 energy efficiency관점에서 고찰하여 적용 가능한 기본 processor 구조를 설정하였다. 그리고 본 논문에서 제안된 기본 구조 연구는 mobile platform에 바로 적용이 가능하며 더 나아가 특정 응용 프로그램에 최적의 성능을 발휘할 수 있는 자동화 설계기반환경에서의 configurable processor 설계에서 그 기본 processor 구조로 사용될 수 있다.

디지털 임피던스 보정과 이퀄라이저를 가진 1.88mW/Gb/s 5Gb/s 송신단 (A 1.88-mW/Gb/s 5-Gb/s Transmitter with Digital Impedance Calibration and Equalizer)

  • 김호성;백승욱;장영찬
    • 한국정보통신학회논문지
    • /
    • 제20권1호
    • /
    • pp.110-116
    • /
    • 2016
  • 본 논문에서는 디지털 임피던스 보정 회로와 이퀄라이저 회로를 가진 1.2V 5Gb/s SLVS 차동 송신단을 제안한다. 제안하는 송신단은 4-위상 출력 클록을 갖는 위상 고정 루프, 4-to-1 직렬변환기, 레귤레이터, 출력 드라이버, 그리고 신호보존성을 향상하기 위한 이퀄라이저 회로를 포함한다. 또한, built-in self-test를 위해 pseudo random bit sequence 발생기를 함께 구현한다. 제안하는 SLVS 송신단은 80mV에서 500mV의 차동 출력 전압범위를 지원한다. SLVS 송신단은 1.2V의 공급전압을 가지는 65nm CMOS공정을 이용하여 구현한다. 측정된 5Gb/s SLVS 송신단의 peak-to-peak 시간 지터는 46.67ps이며, 전력소모는 1.88mW/Gb/s이다.

3선-단접지배전선로의 신뢰도개선을 위한 BEF 검출 알고리즘 (BEF Detection Algorithm to Improve Reliability of Three-Wire-Unigrounded Distribution Line)

  • Wan-Ki Min;Myeong-Ho Yoo;Seong-Hwa Kang
    • 한국안전학회지
    • /
    • 제12권3호
    • /
    • pp.166-172
    • /
    • 1997
  • 배전선로에서 지락사고가 발생할 경우 신속한 검출은 감전사고 예방, 전기화재 방지 및 전력설비의 최적 운용에 있어서 중요하다. BEF(Back-fed Earth Fault)는 일종의 배전선로 지락사고로 부하측이 지락되는 경우이며 지락전류가 매우 작기 때문에 전류 검출에 의하여 배전 계통을 보호하기는 어려우나 배전 자동화 지역에서는 UVR(Under Voltage Relay)을 이용하여 보호한다. 그러나 배전 자동화가 되지 않은 지역에서는 UVR에 의해 보호가 불가능하므로 BEF의 특성을 해석하여 경제적으로 BEF를 방지하여야 한다. 본 논문에서는 RTDS, EMTP 시뮬레이션, ETSA의 실증 시험 데이터를 비교, 검토하여 기준 영상전류치를 설정하고, 이를 적용하여 측정된 영상 전류와 설정된 기준치를 비교하여 3상-단일 접지 배전 시스템의 정상 상태와 BEF의 구분이 가능한 BEF검출 알고리즘을 제안하였다. 다양한 조건에서 ETSA의 현장 시험에 적용하여 검토한 결과 3상-단일 접지 배전 시스템에서 제안된 BEF 검출 알고리즘의 타당성이 입증되었다. 따라서 본 알고리즘을 적용하여 배전선로를 운용하면 BEF에 의한 재해의 예방이 가능하리라 사료된다.

  • PDF

혼합절연을 이용한 초저손실급 주상변압기 개발에 관한 연구 (A Study on the Development of Super Low-loss Type Pole Transformer Using the Hybrid Insulation)

  • 민윤홍;신대철
    • 조명전기설비학회논문지
    • /
    • 제21권7호
    • /
    • pp.84-93
    • /
    • 2007
  • 주상변압기는 고객에게 직접 전력을 공급하는 설비로서 전력공급의 안정성확보를 위한 중요한 기자재 중 하나이다. 하지만 제조결함에 의한 3년 이내의 초기고장 또는 13년이 초과 사용한 후의 열화고장이 빈번히 발생하고 있어 변압기 품질분석을 통한 신뢰성이 개선된 주상변압기 개발이 필요하다. 본 논문에서는 열적, 기계적, 전기적으로 성능이 향상된 새로운 모델의 혼합절연 주상변압기를 개발하였다. 변압기의 기계적, 열적특성을 향상시키기 위한 혼합절연 방식에 대한 설계 및 제작방법을 제시하고 과부하시험을 시행하여 순간최대부하에 대응할 수 있도록 과부하내량 160[%] 까지 증가시킬 수 있음을 확인하였다. 또한 본 논문에서는 100[kVA] 1대를 시제품으로 제작하여 단락강도시험과 변압기 관련 절연시험을 시행하여 전자기계력의 분석과 단락강도설계 향상 방안에 대하여 설명하고 이와 관련하여 연구한 결과에 대해 논하였다.

X-band 입사파 환경에서 안테나 송신 신호 on/off에 대한 RCS(Radar Cross Section) 성능에 관한 연구 (A Study on RCS(Radar Cross Section) Performance with Antenna Transmit Signal on/off in the X-band Incident Wave Environment)

  • 정은태;박진우;유병길;김영담;김기철;서종우
    • 한국군사과학기술학회지
    • /
    • 제23권1호
    • /
    • pp.59-65
    • /
    • 2020
  • Many technologies are being studied to reduce the RCS(Radar Cross Section) of stealth aircraft. Most RCS-reduction technlogies correspond to platforms. It is important to identify factors that RCS performance through simulation analysis of aircraft Mounted equipment. In particular, there are no studies of RCS performance in the radar frequency band when antenna transmit signals are applied. In this paper, the RCS performance variation on the transmit signal on/off of antennas mounted on a stealth aircraft was verified. Antennas were selected for each frequency band and simulated analysis to the RCS performance changes during antenna transmitting signal. Finally, to verify the characteristics of the change in RCS performance, RCS test measurements on the low-profile antenna transmit signal on/off were performed. In addintion, antenna RCS test measurement was performed according to the change of transmit signal power output. As a result, it was confirmed that there is no change in RCS performance when an antenna transmit signal is applied.

희생양극을 이용한 태양광 리본의 부식 저감 (Corrosion mitigation of photovoltaic ribbon using a sacrificial anode)

  • 오원욱;천성일
    • 한국산학기술학회논문지
    • /
    • 제18권3호
    • /
    • pp.681-686
    • /
    • 2017
  • 태양광 모듈에서 태양전지를 연결해주는 인터커넥터로 리본 솔더로 SnPbAg가 사용되고, 옥외 태양광 발전에 장기간 노출시 리본의 부식으로 인한 열화가 흔히 관찰된다. 이러한 부식현상으로 인하여 리본과 태양전지의 접합이 약해져 접촉저항이 증가하고, 또한 리본 자체의 직렬 저항이 증가하게 되어 태양전지의 전압 전류 곡선에서 충진률 손실로 출력이 저하된다. 본 논문에서는 리본의 부식을 완화시킬 수 있는 방법으로 희생양극법을 이용하여 순수 알루미늄 및 아연, 알루미늄, 아연 그리고 마그네슘의 합금을 이용한 5가지 희생양극 소재의 부식에 의한 열화 저감을 연구하였다. 전기화학적 방법으로 희생양극 소재의 개방회로 전위와 폐쇄회로 전위를 측정하였고, 포텐시오다이나믹 분극 곡선을 측정하고, 영저항전류계를 이용하여 리본과 소재간의 갈바닉 전류를 측정하였다. 또한, 아세트산과, NaCl에 리본과 희생양극 소재의 부착 전후의 침지시험과 4셀 미니모듈로 제작한 후 1500시간 고온고습 시험 전후 출력을 평가하였다. 그 결과 Al-3Mg와 Al-3Zn-1Mg의 희생양극 소재가 부식속도가 느리고, 출력저하를 저감시킬 뿐만 아니라 장기 안정성에도 효과적인 것으로 평가된다.

150℃에서 원전 2차측 배관재료의 Cr함량에 따른 유체가속부식 특성 (Effect of Cr content on the FAC of pipe material at 150℃)

  • 박태준;김홍표
    • Corrosion Science and Technology
    • /
    • 제12권6호
    • /
    • pp.274-279
    • /
    • 2013
  • Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. During the FAC, a protective oxide layer on carbon steel dissolves into flowing water leading to a thinning of the oxide layer and accelerating corrosion of base material. As a result, severe failures may occur in the piping and equipment of NPPs. Effect of alloying elements on FAC of pipe materials was studied with rotating cylinder FAC test facility at $150^{\circ}C$ and at flow velocity of 4m/s. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO) and temperature. Test solution was the demineralized water, and DO concentration was less than 1 ppb. Surface appearance of A 106 Gr. B which is used widely in secondary pipe in NPPs showed orange peel appearance, typical appearance of FAC. The materials with Cr content higher than 0.17wt.% showed pit. The pit is thought to early degradation mode of FAC. The corrosion product within the pit was enriched with Cr, Mo, Cu, Ni and S. But S was not detected in SA336 F22V with 2.25wt.% Cr. The enrichment of Cr and Mo seemed to be related with low, solubility of Cr and Mo compared to Fe. Measured FAC rate was compared with Ducreaux's relationship and showed slightly lower FAC rate than Ducreaux's relationship.