• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.343-356
• /
• 2016

As the common cast-in-place construction works fails to meet the enormous construction demand under rapid economic growth, the development of prefabricated structure instead becomes increasingly promising in China. For the prefabricated structure, its load carrying connection joint play a key role in maintaining the structural integrity. Therefore, a novel end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column was proposed. Under action of low cycle repeated horizontal loadings, comparative tests are conducted on 6 prefabricated pre-stressed intermediate joint specimens and 1 cast-in-place joint specimen to obtain the specimen failure modes, hysteresis curves, skeleton curves, ductility factor, stiffness degradation and energy dissipation capacity and other seismic indicators, and the seismic characteristics of the new-type prefabricated beam-column connecting joint are determined. The test results show that all the specimens for end plate bolt connecting joint between fully prefabricated pre-stressed concrete beam and high-strength reinforcement-confined concrete column have realized the design objectives of strong column weak beam. The hysteretic curves for specimens are good, indicating desirable ductility and energy dissipation capacity and seismic performances, and the research results provide theoretical basis and technical support for the promotion and application of prefabricated assembly frames in the earthquake zone.

• 폴리머
• /
• 제31권1호
• /
• pp.31-36
• /
• 2007

플라스마 표면처리는 전체적인 물성은 유지하고 표면의 특성만을 변화시킨다고 전해지고 있다. 이번 연구에서는 플라스마 처리에 의해 높은 발수성을 나타내는 나일론 6 섬유로의 개질을 시도하였다. 발수성을 나타내는 나일론 섬유는 가스 종류, 처리시간, 인가 파워를 변수로 하여 RF 진공 플라스마 시스템에서 처리되었다. 플라스마 처리된 섬유의 표면을 scanning electron microscopy(SEM)과 atomic force microscopy(AFM)으로 모폴로지 변화를 살펴보았으며, 기계적 특성과 고분자 고유의 특성을 인장강도와 Differential scanning calorimetry(DSC), thermo-gravimetric analysis (TGA)로 각각 분석하였다. 또한 나일론 섬유의 발수성 평가는 물방울 흡수시간으로 테스트를 실시하였다. 이러한 결과들은 플라스마 표면처리로 인해서 나일론 섬유의 발수성이 향상됨을 나타내었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2392-2401
• /
• 2018

Creepage discharge faults in air on solid insulating material play a vital role in degradation and ageing of material which ultimately leads to breakdown of power equipment. And electric discharge decompose air in to its by-products such as Ozone and $NO_x$ gases. By analyzing air decomposition gases is a potential method for fault diagnostic in air. In this paper, experimental research has been conducted to study the effect of creepage discharge on rate of generation of air decomposition by-products using different insulating materials such as RTV, epoxy and fiberglass laminated sheet. Moreover XRF analysis has been done to analyze creepage discharge effect on these insulating materials. All experiments have been done in an open air test cell under constant temperature and pressure conditions. While analysis has been made for low and high humidity conditions. The results show that the overall concentration of air decomposition by-products under creepage discharge in low humidity is 4% higher than concentration measured in high humidity. Based on this study a mathematical relationship is also proposed for the rate of generation of air decomposition by-products under creepage discharge fault. This study leads to indirect way for diagnostic of creepage discharge propagation in air.

• 대한한방부인과학회지
• /
• 제24권3호
• /
• pp.109-115
• /
• 2011

Objectives: To characterize autonomic dysfunction in patients with Cold hypersensitivity, their heart rate variability(HRV) were measured and analyzed with cold hypersensitivity patients, compared with those of normal population. Methods: We studied 56 patients visiting Gangnam Kyung-hee korean hospital from 1st January 2010 to 31th December 2010. Heart rate variability were obtained from 28 female patients who suffer from cold hypersensitivity and 28 healthy female controls in resting state. We studied the difference of Heart rate variability between two groups by Independent T-test using SPSS for windows(version 17.0). Results: Standard deviation of NN interval(SDNN), total power(TP), Very low frequency(VLF) in patients with cold hypersensitivity were significantly different with those of controls. While no significant differences were observed in square root of mean squared differences of successive NN intervals (RMSSD), low frequency (LF) and high frequency(HF). Conclusions: The decreased values of heart rate variability(HRV) study means that they may have some kinds of imbalance in autonomic nervous system in cold hypersensitivity patients. heart rate variabiliry(HRV) study might be a tool of diagnosis and predictors in cold hypersensitivity patients.

• 한국전자파학회논문지
• /
• 제19권3호
• /
• pp.384-390
• /
• 2008

본 논문에서는 TSMC 0.18 um CMOS 공정을 사용하여 UWB Chaotic-OOK(On-Off Keying) 통신을 위한 송신기를 설계하였다. 송신기는 Quasi-chaotic 신호 발생기, OOK 변조기, 구동 증폭기로 구성되어 있다. 일반적으로 아날로그 피드백을 사용하는 chaotic 신호 발생기는 공정 변화에 대한 취약점이 있어 이를 개선하기 위하여 디지털 피드백 구조의 Quasi-chaotic 신호 발생기를 사용하였다 또한, OOK 변조를 위해 T형 구조의 변조기와 단일 출력 신호를 얻기 위한 차동 입력 단일 출력 구동 증폭기를 설계하였다. 측정 결과, 요구되는 spectrum mask를 만족시키는 출력을 얻었으며, 데이터 20 Kbps, 200 Kbps, 2 Mbps, 10 Mbps에 따른 OOK 변조 테스트를 통해 출력 신호를 확인하여 UWB chaotic-OOk 송신기로 사용 가능함을 확인하였다.

• 전자공학회논문지C
• /
• 제36C권1호
• /
• pp.49-58
• /
• 1999

본 논문에서는 통과 대역폭이 5KHZ, ripple이 0.1dB이하인 스위치드 캐패시터(Switched Capacitor) 필터를 $0.8{\mu}m$ single poly CMOS ASIC 표준 공정을 이용하여 집적화된 단일 칩으로 제작하였다. 제안된 5차 타원 저역 통과 필털의 구성은 MOS 스위치와 poly 캐패시터, 5개의 2단 CMOS op-amp로 구성하였다. 필터구현은 LC 수동형으로부터 연속전달함수 H(s)를 구하고 쌍선형 z변환을 통하여 이산전달함수 H(z)으로 바꾸어 2차 바이쿼드(biquad)를 종속 연결하는 빌딩블록 방식을 택하였다. 또한 op-amp의 구동범위를 고려하면서 캐패시터 면적을 감소시킨 스케일링 실시한 동일 특성의 필터를 제작하여 그 특성 변화를 비교, 분석하였다. 측정결과 ${\pm}2.5V$ 전원, 50KHz의 표본 주파수에서 2종의 필터 모두 4.96~4.98KHz의 통과 대역폭에 0.7~0.81dB의 리플, 35~38dB정도의 저지대역 이득감쇠 특성을 보였다.

• Journal of Biosystems Engineering
• /
• 제30권4호
• /
• pp.210-219
• /
• 2005

This study was conducted to solve the problem of crawled spinach harvesting that had been mainly done by manpower on the outdoor fields during the winter season. Moreover, there are not enough workers available for farming at most of rural areas in Korea because farming is getting hard and the number of old-aged workers is increasing. In order to find appropriate methods of digging, picking and collecting of spinach, the tests were examined outdoors. A prototype was designed based on the results of the tests and then fabricated for digging, picking-up and then collecting in continuous operation for harvesting spinach planted in the outdoor fields. In the field test with the prototype, the vibration intensity transmitted to the driver by vibrating blade was low while the vibrating blade reduced digging power by $46\%$ compared to that of the fixed blade. The spinach loss was found to be as low as $0.7\%$ in the condition of digging depth of 40 mm, cam rotational velocity of 748 rpm, and blade amplitude of 16.5 m. The working performance of the prototype spinach harvester was found to be 3.8 hour/10a resulting in $96\%$ of labor saving and $85\%$ of operating cost compared to the conventional manual harvesting.

• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.153-159
• /
• 2004

The purpose of this research is to investigate the performance of swirl combustion chamber diesel engine by changing the jet passage area, the depth and shape of the piston top cavity (main chamber). The performance of diesel engine with newly changed swirl combustion chamber was tested through the experimental conditions as engine speed, load and injection timing etc. The test results were compared and analyzed. And another purpose of this research is to make a new diesel engine that is satisfied fuel consumption and regulation value of exhaust gas. 1. The rate of fuel consumption was affected significantly by the jet passage area at the high speed and load than low speed and low load. The influence of jet passage large area was proven to decrease the rate of fuel consumption. 2. Smoke was affected significantly by the depth of the piston top cavity, but exhaust temperature and the rate of fuel consumption wasn't affected. The rate of fuel consumption was affected by changing injection timing. 3. The rate of fuel consumption, exhaust temperature and Smoke were affected significantly by the shape of the piston top cavity from rectangular to trapezoid. That is we have all high value. The exhaust smoke density and exhaust gas temperature depended sensitively on variation of the injection timing rather than the shape of the combustion chamber within the experimental conditions. 4. We made a new diesel engine that is satisfied design target values(sfc=190 g/hr, NOx + THC=6.0 g/KWh, PM=0.3 KWh), the rate of fuel consumption and emission standard etc., through changing injection timing at the maximum torque point and rated power point. Although we have a little high NOx value.

• 천문학논총
• /
• 제11권1호
• /
• pp.109-123
• /
• 1996

We have developed a 5GHz continuum receiver system. The receiver is a direct type receiver. In order to reduce the noise due to the fluctuation of the gain in the amplifiers, the system employs the Dicke switching method. We made the 5GHz low-noise amplifier and the bandpass filter. The low-noise amplifier gives ${\sim}35dB$ gain and has ${\sim}210K$ noise temperature. The bandpass filter has a passband between 4.3 and 5.4GHz. We also made switch driver, video amplifiers, phase detector, and integrator. Using a 1.8 meter offset parabolic antenna, we measured the efficiency of the system. Since the antenna does not have a driver to track objects, observations were performed with the antenna fixed. The measured noise temperature of the system is ${\sim}650K$. From the observation of the blank sky, noise level was measured. It was found that the systematic noise(${\sim}0.5K$: peak to peak value) is much larger than the thermal noise. The systematic noise is possibly related to the stability of the DC power supplied to the receiver system. Besides the noise of the system, it was found that the airplanes are the very serious noise sources. We measured the radio flux of the Sun using the developed system. The observed radio flux of the Sun is ${\sim}10^6Jy$, which is close to the known value of the quiet Sun. The test observation of the Sun shows that the angular beam size of the antenna is ${\sim}2.2^{\circ}$.

• 지역사회간호학회지
• /
• 제14권3호
• /
• pp.496-506
• /
• 2003

The purpose of this study is to analyze the affecting factors on breast self-examination of middle-aged women in Korea. The subjects were 141 women on Jeju Island, and materials were collected through an organized questionnaire from March to August 2002. The data were analyzed by using descriptive statistics, $x^2$-test. A-nova and Discriminant analysis by the SAS program. The major results are as follows: 1. 53% of the subjects performed the breast self-examination. The practice of breast self-examination was correlated with the education level, income, low salt diet, more than 30 minutes of regular exercise. 2. Attitudes towards breast self-examination were not a significant practice regarding breast self-examination. However, the cognition about difficulty of breast self-examination partly showed an important barrier factor to the positive attitude. 3. The average self-efficacy concerning breast self-examination was 3.03. The stages of change related to the subjects showed that a contemplation stage was high. 4. With a stepwise multiple regression, the most significant factor on self-efficacy related with breast self-examination was the contemplation stage, 30-40 aged women. high income, regular exercise, low salt diet, family cancer history, etc. 5. With the discriminant analysis, the most important factors related with the practice of the breast self-examination were income and self-efficacy. The power of discriminant was 59%. The results of this study suggests that programs should be developed to promote practice and the self-efficacy related with breast self-examination.