• Smart Structures and Systems
• /
• v.22 no.2
• /
• pp.151-159
• /
• 2018

Maintenance activities are regarded as a key part of the repairable deteriorating system because they maintain the equipment in good condition. In practice, many maintenance policies are used in engineering fields to reduce unexpected failures and slow down the deterioration of the system. However, in traditional maintenance policies, maintenance activities have often been assumed to be performed at the same time interval, which may result in higher operational costs and more system failures. Thus, this study presents two non-periodic preventive maintenance (PM) policies for repairable deteriorating systems, employing the failure rate of the system as a conditional variable. In the proposed PM models, the failure rate of the system was restored via the failure rate reduction factors after imperfect PM activities. Operational costs were also considered, which increased along with the operating time of the system and the frequency of PM activities to reflect the deterioration process of the system. A numerical example was provided to illustrate the proposed PM policy. The results showed that PM activities performed at a low failure rate threshold slowed down the degradation of the system and thus extended the system lifetime. Moreover, when the operational cost was considered in the proposed maintenance scheme, the system replacement was more cost-effective than frequent PM activities in the severely degraded system.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.735-742
• /
• 2007

To get competitiveness in international markets, it is essential to provide low acquisition, maintenance and operation cost with high reliability, availability and maintainability. It can be achieved by lowering development cost, making proper maintenance planning and scheduling strategies, allocating man power and logistic cost properly. In this paper, we introduces the research on making a model for estimating the life cycle cost of newly developing magnetic levitation train system in Korea. To develop a proper life cycle cost model, we broadly analyzed specs and standards and compared the life cycle cost model developed in other country. Finally, we suggests strategies to develop an unique model for the magnetic levitation train system developing in Korea.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.4
• /
• pp.112-118
• /
• 2013

Air travel demand has recently been growing and establishment and operation of low-cost carriers have been increased. Against this backdrop, low-cost carriers need to figure out diversified customer demand for low-cost carriers and ways to maximize marketing efficiency before applying it to the field so that they can attain superiority to large carriers in increased intensified competition. Low-cost carriers need to be differentiated from other carriers for the purpose of improving profits. Toward this end, this study conducted analysis on importance and satisfaction with carrier choice using IPA with regard to low-cost carrier customers. In conclusion, the paper accurately examined advantages and disadvantages of low-cost carriers compared to general carriers based on results of IPA analysis and suggested managerial strategies to enhance competitiveness based on division into four parts including maintenance and enforcement (1st quadrant, Delay compensation, Booking rapidity, Check rapidity, Crew service, refund service, baggage service, punctuality, transit services, airlines images), concentrated improvement (2nd quadrant, price, Convenience of seat), passive administration (3rd quadrant, Boarding service, cabin cleanliness, flight schedule, whether local crew on board, meal service, in-flight entertainment service), and enhanced satisfaction (4th quadrant, duty-free service, Variety of routes), so that practical suggestions could be presented to employees working in the field.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.312-316
• /
• 2014

This paper describes a turnout without movable parts for magnetically levitated vehicles with hybrid magnets, which have been studied by the authors in place of streetcars. Their low construction cost and low maintenance is key to their practical use. Magnetic levitation systems using forces of attraction can generate guidance force automatically, but the damping force against lateral motion is negligible. However, the lateral damping characteristic was improved by using divided iron type magnets and rails. Using this turnout without movable parts will facilitate smooth direction switching.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.979-987
• /
• 2011

The Ballast Track has been widely applied in traditionally due to low initial cost and abundant elastic property. But the disadvantages of Ballast track are; labor-intensive and costly maintenance, weak in high-speed and heavy axial load, in additionally need wide cross section of tunnel and massive substructure in viaduct. Therefore, recent applications tend to more and more towards slab track such as Gyeungbu high speed rail and existing line. The slab track increased the stability, resistance and durability of track, and save maintenance cost compare to the Ballast Track. But the slab track have weakness of track elongation by sub-ballast differential settlement and that threat safety of train operation. Therefor the slab track need to prevent cracks in concrete ballast for insure the durability of slab track. In this paper, review main items and its expected effects of the slab track maintenance standards that control sub-ballast settlement and concrete ballast cracks.

• Korean Journal of Artificial Intelligence
• /
• v.6 no.1
• /
• pp.1-10
• /
• 2018

Compressed Air is an important energy source used in most factories nowadays. The automation trend using air compressor has been gradually increasing with the interest of the 4th industry in recent years. With the air compressor system, it is possible to construct the device at low cost and easily achieve automation and energy saving. In addition, With trend of FA, miniaturation and light weight manufacturing trend expand their use in the electronics, medical, and food sectors. Research method is to design the technology for the remote control of the following information as USN base. Development of flexible sensing module from real time observation module for fusion of IT technology in compressed air systems, design and manufacture of flexible sensing module, and realiability assessment. Design of real-time integrated management system for observation data of compressed air system - Ability to process observation data measured in real time into pre-processing and analysis data. This study expects unconventionally decreasing effect of energy cost that takes up 60~70% of air compressor layout and operation and maintenance management cost through USN(Ubiquitous Sensor Network) technology by using optimum operational condition from real time observation module. In addition, by preventing maintenance cost from malfunction of air compressor beforehand, maintenance cost is anticipated to cut back.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.37-41
• /
• 2018

Recently, interest in the safety and maintenance of the structures is growing. However, due to the low-cost order placed by the ordering organization, the safety diagnosis specialized institution becomes insolvent and many problems have arisen due to insufficient inspection and diagnosis. Therefore, in this study, the current status of bid cost was examined through the survey of the practitioners and case analysis. As a result, Precision safety inspection is deemed that it is necessary to increase the efficiency of the criteria cost and to strengthen the rigidity of the criteria cost rather than adjusting the criteria cost. Precision safety diagnosis, the criteria cost for structures with a floor area of less than $10,000m^2$ is lowered to 80 % from the current standard. For structures larger than that, the current criteria cost are applied, but it is deemed necessary to strengthen the rigidity of the criteria cost.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.54-59
• /
• 2008

The poor maintenance and management of HVAC systems finally lead to the shortening of the life expectancy and result in the increase of operating costs and energy consumptions due to low efficiencies. Also, it is essential to try to develop ways to adequately maintain and to use the building facilities efficiently in order to preserve earth environment and the limited resource. In this study, an analysis on the maintenance and management cost for HVAC systems was carried out with the capacity of equipment. Besides, the LCC(Life Cycle Cost) based analysis was carried out to verify the effect of the doing maintenance and management. As the results, the case of the good maintenance and management is able to save LCC to 11 % than the case of the poor method.

• Journal of the Korean housing association
• /
• v.15 no.1
• /
• pp.33-40
• /
• 2004

Considering the present development situation of rental apartment since 1982, the supply of rental housing for low-income dwellers has contributed a amount of quantities, but has been deficient qualities in housing policy. To propose the device of remodeling for low-income dwellers in deteriorated apartment, this study investigated the energy consumption of central heating system and the characteristics of maintenance cost in permanent rental apartment. The results of evaluation of alternative heating systems by Life Cycle Costing in permanent rental apartment were as follows; From Life Cycle 15∼20 years by Present Worth Method, the economic heating system of remodeling is central heating system (heat source: B-C oil), unit heating system(natural gas), central heating system(natural gas) in order.

• Journal of Wetlands Research
• /
• v.21 no.1
• /
• pp.57-65
• /
• 2019

LID(Low Impact Development) facility classified as a social infrastructure can maintain landscape sustainability and functional sustainability through continuous maintenance and management. Since LID is a natural-based solution, the sustainability can be secured through the management of weeds, wastes and vegetation. The LID facility is distributed in the city and is an infrastructure that can be managed through citizen participation because of simple maintenance. Therefore, this study was conducted to investigate the maintenance factors affecting the sustainability of the LID facilities and to suggest measures for maintenance by investigating the participation of the peoples. The factors for landscape sustainability were derived to waste and weed management. Also the factors for functional sustainability were assessed to identification and management of dead bodies and selection of applicable soil and plant species. The citizens showed high agreement of more than 80% in the questionnaires on expanding and managing LID facilities, enacting LID ordinances, and participating in the national movement. The intention to participate in LID management linked to jobs was about 64%, indicating that LID could become a job for the vulnerable. Maintenance of the LID can easily be carried out by non-specialists, which can lead to citizen participation with low cost for each facility. The maintenance cost for citizen participation can be allocated from the social infrastructure management cost reduced by LID application of the local government and the social welfare budget of the central government.