• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.391-402
• /
• 2023

Low-dimensional (zero-dimensional (0-dim), 2-dimensional (2-dim)) nanoparticles, such as chalcogenide compound semiconductors, III-V semiconductors, transition metal dichalcogenides (TMDs), II-VI semiconductors, nanocarbons, hybrid quantum dots (QDs), and perovskite QDs (PQDs), for which blue light emission has been observed, are reviewed. Current synthesis and device fabrication technologies as well as their prospective applications on next-generation quantum-dot-based light-emitting diodes are discussed.

• Journal of Korea Multimedia Society
• /
• v.25 no.8
• /
• pp.991-998
• /
• 2022

Recently, object recognition using image/video signals is rapidly spreading on autonomous driving and mobile phones. However, the actual input image/video signals are easily exposed to a poor illuminance environment. A recent researches for improving illumination enable to estimate and compensate the illumination parameters. In this study, we propose VE-DCE (video enhancement zero-reference deep curve estimation) to improve the illumination of low-light images. The proposed VE-DCE uses unsupervised learning-based zero-reference deep curve, which is one of the latest among learning based estimation techniques. Experimental results show that the proposed method can achieve the quality of low-light video as well as images compared to the previous method. In addition, it can reduce the computational complexity with respect to the existing method.

• Fisheries and Aquatic Sciences
• /
• v.26 no.8
• /
• pp.514-523
• /
• 2023

The visible threshold of Oreochromis niloticus responded to high light intensity under short wavelengths, whereas the response to low light intensity under long wavelengths was low, with a minimum visual threshold of 574 nm of LED lights. Movement distance of O. niloticus was dropped at 31℃ and increased abnormally at 37℃ under natural light. Comparing movement distance under red (622 nm) and green (518 nm) lights of LED, movement distance and swimming speed under red and green lights were higher than under natural light. However, the movement distance decreased rapidly at 31℃ under red light and lowest at 33℃ under green light. After that, there was a tendency to adapt to high water temperatures gradually. Consequently, red and green lights may be recommended for O. niloticus's aquaculture because the red and green lights have a positive effect on growth performance, survival rate, and metabolism, as shown in previous studies. It is necessary to control the water temperature below 32℃ because abnormal behavior above 32℃ revealed under red and green LED lights and natural light.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.1
• /
• pp.20-26
• /
• 2014

Objective: The low level lasers currently in the market vary in wavelength, dosage, and frequency. These devices are used with much different clinical pathology. Most notably, some studies claim that wounds heal faster with low level laser therapy due to the fact that bacteria commonly found in wounds are killed by laser light. Systemic and meta-analysis studies found the difficulty of comparison of numerous research studies because of differences in the intensities and frequencies of low level laser treatment (LLLT). The purpose of this study was to determine the effectiveness of LLLT on controlling bacterial growth. Design: Cross-sectional study. Methods: Variables included LLLT dosage and wavelength on 3 bacteria commonly seen in wounds, strains of Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa were used on commercially available 5.0-cm agar plates. Blue, green, and red, ultraviolet (UV) and infrared laser light sources were adjusted to either low or high intensity settings. Five Petri dishes at a time were placed directly beneath laser light sources with the exception of UV which was placed six inches below the suspended light and infrared which was placed directly on top of the Petri dish lid. Each group of five Petri dishes was irradiated for 15 minutes. Results: The results showed no effect of any of 9 different LLLT intensities or colors on bacteria growth compared to sham light. Conclusions: At least for claims of bacterial growth inhibition with LLLT, no support for this claim can be found here.

• Asian Journal of Turfgrass Science
• /
• v.13 no.1
• /
• pp.1-20
• /
• 1999

This study was carried out to investigate the interaction between productivity and light condition and to analyze the material productivity and productive charactaristics under different hours of light in Zoysia japonica. 1. Rate increasement of leaf number and total leaf length was remarkably high at the early growth stage in the control and 9 hour light treatment. The rate gradually decreased as growth proceeded. But 3 hour treatment was very low in the rate from its early growth stage through the whole test period. 2. The increasing rate of leaf area ratio (LAR) in all the experimental plots was remarkably high at the early growth stage after transplanting the grass. The shorter photoperiod resulted remarkable lower increasement of LAR. 3. The rhizome growth rate of the 9 hour photoperiod was high contrast to the 3 hour photoperiod treatment. The increasing rate of node number was also showed similar trend. 4. Chlorophyll content was very high at the 36 days after transplanting and then decreased gradually. Chlorophyll content on 3 hours photoperiod plot severely decreased. The ratio of chlorophyll a to b was decreased significantly at short day treatment. 5. The content of soluble sugar was increased at shorter photoperiod. The highest ratio of sugar content was on August, 28 by HPLC method. Such a result was attributed to accumulation of sugar in spite of low synthesis of ploysacchrides, translocation by low consumption. 6. The increasing rate of standings in all light treatment was high at the early growth stage after transplanting. Short photoperiod treatment by 3hour showed especially low prganic productivity on Zoysia japonica.

• Animal cells and systems
• /
• v.2 no.4
• /
• pp.455-462
• /
• 1998

A survey was conducted on the inorganic and organic solute patterns of plants in connection with nitrate metabolism according to different light regimes (1.9, 16.0, 91.5 $Wm^{-2}$). Besides measuring in vivo NRA, we also quantitatively analyzed ater-soluble inorganic ions, organic acids, low molecular weight carbohydrates, amino aciss and total N (% DW). Among 4 Carex species, C. pilosa is known as shade-adapted species and the others as half (C. gracilis) to full (C. rostrata & C. distans) light-adapted species. Compared to species adapted to high light intensity, shade-adapted C. pilosa showed reduced productivity under the highest light intensity. In general, nitrate and amino acid levels decreased at higher light intensity, while sugar and organic acid concentrations increased. In C. pilosa osmolality tended to rise with increasing light intensity, while in the other species it tended to fall. Under low light intensity, the drop in soluble carbohydrate contents is osmotically compensated for by an enhanced nitrate concentration. It is concluded that competition between nitrate and $CO_2$reduction for reductants and ATP from photosynthesis may have important ecological consequences for the adaptation of plants to low or high light conditions. Additionally, the patterns of ionic changes due to increased light intensities were essentially the same in all selected species, indicating similar characteristics of heir mineral ion and organic acid metabolism as well as in field-grown Carex species.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.85-90
• /
• 2000

For more esthetic treatments the use of composite in molar areas are increasing. But polymerzation shrinkage that cause marginal leakage and cuspal deflection has been the problems of composites. The purpose of this study is to compare the effect of low intensity curing and polishing period on marginal leakage. Cavities were prepared on the buccal or lingual surface of forty five sound extracted human teeth and etching, application of bonding agent and filling of composite was done. Group 1 was light cured at intensity of 600$mW/cm^2$ for 41 seconds and polished. Group 2 was light cured at intensity of 300$mW/cm^2$ for 2 seconds and polished and after polishing it was light cured for 40 seconds at 600$mW/cm^2$. Group 3 was light cured at intensity of 300$mW/cm^2$ for 2 seconds and waited for 5 minutes and after curing at 600$mW/cm^2$ for 40 seconds polishing was done. The specimens were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 1000 cycles and immersed in 2% methylene blue solution for 24 hours. Composite-tooth interface was examined under stereobinocular microscope for dye penetration. The results were as follows : 1. Group which were cured at low intensity and polished after curing at high intensity showed less marginal leakage than group which were cured at high intensity for 41 seconds(p<0.05). 2. Marginal leakage between group which were cured at low intensity and polished immediately and group which were cured at high intensity for 41 second were not significantly different. Light curing at low intensity can reduce marginal leakage but polishing immediately after curing at low intensity for short time can affect marginal leakage.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.7
• /
• pp.791-798
• /
• 1988

Films of Cr, Cu, and Al were deposited by the evaporation technique at the high vacuum level-high evaporation rate and the low vacuum level-low evaporation rate. We measured sheet resistance and light transmittance, and observed microstructure and diffraction pattern by TEM, and investigated oxygen content in thin film by AES. We discussed the relations among microstructure, sheet resistance, and light transmittance with AES data. We found that the films deposited at the high vacuum level-high evaporation rate have small oxygen content in thin film comparing to the films deposited at the low vacuum level-low vacuum level-low evaporation rate, and that the films having crystalline structure and larger grain size were formed in the case of the high vacuum level-high evaporation rate and they showed lower sheet resistance and lower light transmittance.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.66-71
• /
• 2023

As cameras have become primary sensors for mobile robots, vision based Simultaneous Localization and Mapping (SLAM) has achieved impressive results with the recent development of computer vision and deep learning. However, vision information has a disadvantage in that a lot of information disappears in a low-light environment. To overcome the problem, we propose an image enhancement method to perform visual SLAM in a low-light environment. Using the deep generative adversarial models and modified gamma correction, the quality of low-light images were improved. The proposed method is less sharp than the existing method, but it can be applied to ORB-SLAM in real time by dramatically reducing the amount of computation. The experimental results were able to prove the validity of the proposed method by applying to public Dataset TUM and VIVID++.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.21-21
• /
• 2003

To increase the light-emission efficiency of LED, we increased the internal and external quantum efficiency by suppressing the defect formation in the quantum well and by increasing the light extraction efficiency in LED, respectively. First, the internal quantum efficiency was improved by investigating the effect of a low temperature (LT) grown p-GaN layer on the In$\sub$0.25/GaN/GaN MQW in green LED. The properties of p-GaN was optimized at a low growth temperature of 900oC. A green LED using the optimized LT p-type GaN clearly showed the elimination of blue-shift which is originated by the MQW damage due to the high temperature growth process. This result was attributed to the suppression of indium inter-diffusion in MQW layer as evidenced by XRD and HR-TEM analysis. Secondly, we improved the light-extraction efficiency of LED. In spite of high internal quantum efficiency of GaN-based LED, the external quantum efficiency is still low due to the total internal reflection of the light at the semiconductor-air interface. To improve the probability of escaping the photons outside from the LED structure, we fabricated nano-sized cavities on a p-GaN surface utilizing Pt self-assembled metal clusters as an etch mask. Electroluminescence measurement showed that the relative optical output power was increased up to 80% compared to that of LED without nano-sized cavities. I-V measurement also showed that the electrical performance was improved. The enhanced LED performance was attributed to the enhancement of light escaping probability and the decrease of resistance due to the increase in contact area.