• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.60-68
• /
• 1997

Rayleigh Scattering Cross Sections($\sigma$i) of various gases and the temperature distributions of premixes C3H8/O2 flame are measured by high power KrF(248nm) Exci- mer laser and ICCD camera. Results show that $\sigma$i of O2 and Propane(C3H8) gases agree well in the 5% error range, but of H2 has the more or less difference from the calcul- ated value by other groups. This is attributed to the low RS signal of H2 to Nosie level(S/N ratio). The temperature distributions of flame range out between 300K in the air and about 2000K in the burned area. In this temperature range, out system has the about 250K temperature resolution. Because low RS signals in the reaction area with high temperature are affected highly by noises, temperature uncertainty of this area is relatively high to another part of flame. Experimental results show that UV Rayleigh Scattering can be used for the measurement of mixing ratio of mixed gases and the temperature distributions of flame. Especially, this technique can be applied for the measurement of the mixing ratio of air/fuel before the ignition and the flame structure after the ignition inside the Engine.

• 전자공학회논문지CI
• /
• 제48권2호
• /
• pp.106-116
• /
• 2011

USN(Ubiquitous Sensor Network) 환경은 언제, 어디서나 정보를 이용할 수 있게 한다. 이러한 환경의 기반이 되는 기술은 타겟의 정확한 위치설정을 전제로 한다. 특히 ITS(Intelligent Transportation Systems)는 USN 기술을 적용함으로써 쉽게 구축 될 수 있다. 위치측정은 Range-based 방식과 Range-free 방식으로 나눌 수 있다. Range-based 방식은 전파의 불규칙하고 추가 장비가 필요로 센서네트워크기반 위치측정에 적합하지 않은 것으로 알려져 있다. 반면에 Range-free 방식은 능동적인 통신을 수단으로 위치를 측정하므로 자원제약적인 센서네트워크에서는 적합한 것으로 알려져 있다. 그러나 Range-free 방식은 일반적으로 정확성이 부족하며, 특히 밀집도가 낮은 환경에서는 정확성이 매우 낮다. 따라서 이 두 기법은 장단점을 가지고 있다. 그러므로 두 기법을 혼합하여 위치추적의 정확성을 개선할 수 있는 새로운 기법이 요구된다. 본 논문은 Range-free 방식을 개선할 수 있도록 추가 장비가 요구되지 않은 RSSI(Received Signal Strength Indication) 신호 값을 분류하고 주변노드의 위치와 통신범위 및 세기정보를 최대한 활용하여 이동차량을 보다 정확하게 추적할 수 있는 Range-hybrid 기반의 위치추적기법을 제시한다. 추가적으로 예측기법을 활용하여 위치추적의 정확성을 획기적으로 개선할 수 있는 방안을 제시한다. 그리고 시뮬레이션 결과, 제안된 기법이 기존 위치추적 알고리즘 보다 교통 환경에서 위치추적의 정확도가 우수함을 증명하였다.

• 대한전자공학회논문지TE
• /
• 제42권4호
• /
• pp.1-6
• /
• 2005

최근 저항이나 캐패시터와 같은 수동소자를 PCB의 내층에 제조하는 임베디드 패시브 기술이 고성능의 IT 제품을 제조하는데 사용되고 있다. 그런데 임베디드 캐패시터는 정전용량 밀도가 낮아 회로소자로서의 전반적인 응용에 한계가 있다. 본 논문에서는 이러한 한계를 극복하기 위하여 wrinkle형의 전극과 유전체 층을 가진 새로운 임베디드 캐패시터를 제안하였다. FEM 기법을 사용하여 wrinkle형 임베디드 캐패시터의 정전용량 밀도를 평가하였다. Wrinkle형 임베디드 캐패시터는 기존의 평면형 임베디드 캐패시터에 비하여 25.6%$\sim$39.6% 정도 큰 정전용량 밀도를 나타내었다. 특히, thin film형 임베디드 캐패시터에 wrinkle 구조를 적용할 때 정전용량 밀도가 보다 많이 향상되었다.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.371-377
• /
• 1995

Silicon oxide films were grown on single-crystal silicon substrates at low temperatures (25~205$^{\circ}C$) in a low pressure electron cyclotron resonance (ECR) oxygen plasma. The growth rate of the silicon oxide film increased as the temperature increased or the pressure decreased. Also, the thickness of the silicon oxide film increased at negative bias voltage, but not changed at positive bias voltage. The growth law of the silicon oxide film was approximated to the parabolic form. Capacitance-voltage (C-V) and current density-electric field (J-E) characteristics were studied using Al/SiO2/p-Si MOS structures. For a 10.2 nm thick silicon oxide film, the leakage current density at the electric field of 1 MVcm-1 was less than 1.0$\times$10-8Acm-2 and the breakdown field was higher than 10 MVcm-1. The flat band voltage of Al/SiO2/p-Si MOS capacitor was varied in the range of -2~-3 V and the effective dielectric constant was 3.85. These results indicate that high quality oxide films with properties that are similar to those of thermal oxide film can be fastly grown at low temperature using the ECR oxygen plasma.

• 열처리공학회지
• /
• 제37권1호
• /
• pp.1-8
• /
• 2024

Phase stability of tetragonal crystals in yttria-stabilized zirconia ceramics is dependent on the content of yttria and the heat-treatment condition, related with mechanical properties. In this study, we fabricated the 1.5 mol% yttria-stabilized zirconia (1.5Y-YSZ) ceramics by cold isostatic pressing (CIP) and post-sintering at temperature range of 1200 to 1350℃ for 2 hours and investigated the sintered properties and microstructural evolution. Sintered and microstructural parameters, i.e, apparent density, grain size and phase composition of 1.5Y-YSZ ceramics were mainly dependent on the sintering temperature. Maximum sintered density of 99.4 % and average grain size of 200-300 nm could be obtained from the heat-treatment condition above sintering temperature at 1300℃ for 2 hours, possessing the superior mechanical hardness with 1200 Hv. However, phase stability of tetragonal grains in 1.5 YSZ ceramics is very low, inducing the phase transformation to monoclinic crystals on specimen surface during cooling after heat-treatment.

• 한국의류학회지
• /
• 제22권5호
• /
• pp.607-616
• /
• 1998

The purpose of this study was to develope a practical color range for the fashion industry in Korea. 3623 color sample used by 109 brands from'93 spring/summer to'96 spring/summer were collected. Also, the application frequency and consumer responses of each collected colorwere analyzed in this study. To clarify the characterstics of color range used in the fashion industry, density of color was etermined by color clustering based on A: and consumer responses. The resultsof this study were as follow; 1. The result analyzed based on the Munsell System revealed that the distributions of hue were concentrated in R, YR, Y, and PB. The chroma was concenturated mostly in the low range and the value, on the contrary, showed relatively even distribution. 2. 458 representative colors were selected by color clustering based on the toEless than 1. 0. In addition, the frequency of color applications and consumer responses were also considered when selecting the colors frequently used in the fashion industry and finals, 1163 colors wereobtained. The color range of the representative colors showed similar color characteristics with the 3623 colors supplied by the fashion industry. As a results, this approach was proven to appropriate to develope a color range for a practical use. 3. In conclusion, around 1200 colors were suggested to organize the color range to reflect the characteristics of the fashion industry with an acceptable color differance for color planning and management.

• 대한의생명과학회지
• /
• 제16권1호
• /
• pp.19-24
• /
• 2010

We analyzed and compared the concentration of total cholesterol (CHOL), high density lipoprotein (HDL) cholesterol, low density lipoprotein (LDL) cholesterol and triglyceride (TG) in serum and the serum protein electrophoresis fractions of thyroid disease patients. In comparison with the average of reference, our data showed that the average concentration of CHOL, LDL cholesterol and TG in hyperthyroidism patients were decreased significantly, but HDL cholesterol was increased significantly. In hypothyroidism patients, CHOL, HDL cholesterol, LDL cholesterol and TG were all increased significantly. In comparison of the concentration of lipids in each patient to reference range, 28.3% of hyperthyroidism patients showed abnormally low level of total cholesterol. In the patients with hypothyroidism, the percentage of patients showed abnormally high level of CHOL, HDL cholesterol, LDL cholesterol and TG were 37.7%, 10%, 68.8% and 49.1%, respectively. In our studies of serum protein electrophoresis, the average of ${\alpha}_2$-globulin and $\gamma$-globulin in hyperthyroidism patients were increased and $\beta$-globulin was decreased significantly. In hypothyroidism patients, the average of $\gamma$-globulin was increased and $\beta$-globulin was decreased significantly. In comparison of protein fractions of each patient to reference range, 38.3% and 50.0% of hyperthyroidism patients showed abnormally high levels of ${\alpha}_2$-globulin and $\gamma$-globulin, but 73.3% of patients showed abnormally low level of $\beta$-globulin. In hypothyroidism patients, 70.4% of patients were abnormally decreased in $\beta$-globulin and 63.9% of patients were abnormally increased in $\gamma$-globulin. These data suggest that the concentrations of CHOL, HDL cholesterol, LDL cholesterol and TG are not critical data for clinical interpretation of hyperthyroidism, but the levels of them are useful for interpretation of hypothyroidism patients. Our results of serum protein electrophoresis suggest that the concentration of serum protein electrophoresis fractions can be useful to understand the thyroid disease.

• 대한기계학회논문집
• /
• 제8권3호
• /
• pp.195-200
• /
• 1984

본 연구에서는 SUS 304강의 상온하의 평골재 표면에 발생. 성장하는 미소표면 피로균열의 거동을 파괴역학적 관점과 수법으로 정량적으로 조사하려는 연구의 일환 이다.

• 소음진동
• /
• 제9권6호
• /
• pp.1123-1130
• /
• 1999

A system which is composed of a membrane and an air cavity is studied. To analyze the low frequency characteristics of a single membrane-cavity system, a plane wave model is derived. The relations among system variables, such as tension, density and stiffness, are investigated. Absorption coefficient has a maximum value at a peak frequency. In addition, a membrane-cavity system absorbs the low frequency noise with a band around peak frequency. This band is primarily determined by damping effect of the system. Furthermore, a multiple membrane-cavity system is investigated by using the transfer matrix method. To show the practical applicability of the proposed model, extensive experiments were conducted. Results show that a multiple membrane-cavity system can have broader noise reduction in the low frequency range than single.

• Journal of Electrical Engineering and Technology
• /
• 제11권4호
• /
• pp.939-942
• /
• 2016

One of the most important characteristic curves of a solar cell is its current density-voltage (J-V) curve under AM1.5G insolation. Solar cell can be considered as a semiconductor diode, so a diode equivalent model was used to estimate its parameters from the J-V curve by numerical simulation. Active layer plays an important role in operation of a solar cell. We investigated the effect thicknesses and defect densities (N_d) of the active layer on the J-V curve. When the active layer thickness was varied (for N_d = 8×10¹⁷ cm^-3) from 800 nm to 100 nm, the reverse saturation current density (J_o) changed from 3.56×10^-5 A/cm² to 9.62×10^-11 A/cm² and its ideality factor (n) changed from 5.28 to 2.02. For a reduced defect density (N_d = 4×10¹⁵ cm^-3), the n remained within 1.45≤n≤1.92 for the same thickness range. A small increase in shunt resistance and almost no change in series resistance were observed in these cells. The low reverse saturation current density (J_o = 9.62×10^-11 A/cm²) and diode ideality factor (n = 2.02 or 1.45) were observed for amorphous silicon based solar cell with 100 nm thick active layer.