• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.362-367
• /
• 2005

Control network adopted in the national power-plant or manufactory are mostly vendor-dependent products, which have their own special specification, components and individual communication methods. These systems not only raise installation cost, but also bring many difficulties to maintenance and extension. To overcome these problems, this paper introduces a development and application case of a new "PC/Ethernet-based fieldbus" architecture and protocol to be used in mid-level fieldbus. The designed system has a basic idea of "3 Layers fieldbus over Standard-LAN" and implemented on PCs. PC gives user friendly environment. By using an open standard Ethernet in layer 1,2, the system has low cost, wide communication bandwidth and high compatibility. Layer 3 protocol designed for large realtime data communication makes user bypass TCP/IP layer and gives user direct access to the Ethernet. This new protocol eliminates potential collision of Ethernet, and transmits large periodic/non-periodic control data by using long-frame/wide-bandwidth of Ethernet effectively, and offers simple API-Services to the upper layer. Since the system have installed in H-power plant simulator and U-nuclear power plant simulator in Korea, it have been proved to be efficient and stable without any trouble in realtime communication service for full-scope plant simulator that has a lot of control elements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1045-1050
• /
• 2005

This paper describes a design experience of a low-cost 6 DOF spatial tracker system where relative low accuracy and relatively long ranges, wireless communication will be achieved by means of low cost accelerometers and gyros with contemporary microprocessor. However, there are two key problems; one is the bias drift problem and the other is that single or double integration of acceleration signal suffers not only from noise but also from nonlinear effects caused by gravity. To be specific, beginning and stopping of hand motions needs to be accurately detected to initiate and terminate integration process to get position and pose of the hand from accelerometer and gyro signals, since errors due to noise and/or hand-shaking motions accumulated by integration processes. Several experimental results are shown to validate our proposed algorithms.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.459-465
• /
• 2008

Locations of nodes as well as gathered data from nodes are very important because generally multiple nodes are deployed randomly and data are gathered in wireless sensor network. Since the nodes composing wireless sensor network are low cost and low performance devices, it is very difficult to add specially designed devices for positioning into the nodes. Therefore in wireless sensor network, technology positioning nodes precisely using low cost is very important and valuable. This research proposes Cooperative Positioning System, which raises accuracy of location positioning and also can find positions on multiple sensors within limited times.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.163-165
• /
• 2004

A low-cost electronic ballast using a conventional HID controller IC is proposed. The proposed ballast consists of high frequency DC-DC converter, low frequency DC-AC inverter, and igniter circuit. This ballast shows hot-restrike, suitable operation at each stage of various lamp state and stable operation in steady-state.

• International Journal of Computer Science & Network Security
• /
• v.22 no.1
• /
• pp.255-261
• /
• 2022

Routing Protocol for Low-Power and Lossy Networks (RPLs) in Internet of Things (IoT) is currently one of the most popular wireless technologies for sensor communication. RPLs are typically designed for specialized applications, such as monitoring or tracking, in either indoor or outdoor conditions, where battery capacity is a major concern. Several routing techniques have been proposed in recent years to address this issue. Nevertheless, the expansion of the network lifetime in consideration of the sensors' capacities remains an outstanding question. In this research, aANN-CUCKOO based optimization technique is applied to obtain a more efficient and dependable energy efficient solution in IOT-RPL. The proposed method uses time constraints to minimise the distance between source and sink with the objective of a low-cost path. By considering the mobility of the nodes, the technique outperformed with an efficiency of 98% compared with other methods. MATLAB software is used to simulate the proposed model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1391-1396
• /
• 2010

Recently, communication components prefer Bluetooth or Zigbee for PAN. However, using these makes expensive and complicated products such as audio equipments, mobile phones, PC, etc. for transmitting simple messages with low rate. In this paper, we propose wireless communication method using ultrasonic in the audio frequency limit band with speakers and microphones which are in products. We suggest transmitting and receiving methods in the audio frequency limit band for transmitting data without affecting audio signal, and implement an ultrasonic communication modem. Finally, we verify the performance of the ultrasonic communication modem by experiments in an environment with background noise.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1111-1130
• /
• 2016

Cooperative communications can significantly improve the wireless transmission performance with the help of relay nodes. In cooperative communication networks, relay selection and power allocation are two key issues. In this paper, we propose a relay selection and power allocation scheme RS-PA-PSACO (Relay Selection-Power Allocation-Particle Swarm Ant Colony Optimization) based on PSACO (Particle Swarm Ant Colony Optimization) algorithm. This scheme can effectively reduce the computational complexity and select the optimal relay nodes. As one of the swarm intelligence algorithms, PSACO which combined both PSO (Particle Swarm Optimization) and ACO (Ant Colony Optimization) algorithms is effective to solve non-linear optimization problems through a fast global search at a low cost. The proposed RS-PA-PSACO algorithm can simultaneously obtain the optimal solutions of relay selection and power allocation to minimize the SER (Symbol Error Rate) with a fixed total power constraint both in AF (Amplify and Forward) and DF (Decode and Forward) modes. Simulation results show that the proposed scheme improves the system performance significantly both in reliability and power efficiency at a low complexity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.243-246
• /
• 2013

Recently, the 4th generation of mobile communications in Korea with anyone supports was supported high speed multimedia communication services. With the launch of Apple iPhone, there is an explosion of interest in Smartphone itself as well as Internet-based services using Smartphone are being revitalized. Smartphone users, opinion experts almost of the economically active population is using, it has reached the saturation past the early stages of formation. In 1989, the 1st generation mobile communication service has been started with the analog voice service. After this, the 2nd generation mobile communication service for short messages and digital voices has been developed. And, the 3rd generation service of low speed data and low quality videos has been realized in 2000s. The very high speed data service of LTE (long term evolution), which is the 4th generation mobile communication service standards, had been in July 2011. and the subscribers are increasing constantly. However, changes in communication technology, has given an economical cost to Smartphone users. Therefore, the purposes of this study was trending of the communication cost according to the change in the communication technology of the mobile communication industry.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1089-1096
• /
• 2019

Recently, small-scale IoT services using a small amount of information through low-performance computing have been spread. It requires low cost, low-power, and long-distance communication technologies with wide communication radius, relatively low power consumption. This paper proposes a MAC layer and routing protocol that supports multi-hop transmission in small-scale IoT environment distributed over a large area based on LoRa communication and delivering a small amount of sensing data. The terminal node is mobile and the communication type provides bidirectional transmission between the terminal node and the network application server. By applying the proposed protocol, a production line monitoring system for smart factory was implemented. It was confirmed that the basic monitoring functions are normally performed.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.34-38
• /
• 2012

The recent increase in use of the IEEE 802.15.4 standard for wireless connectivity in personal area networks makes of it an important technology for low-cost low-power wireless personal area networks. Studies showed that voice communications over IEEE 802.15.4 networks is feasible by Guaranteed Time Slot (GTS) allocation; but there are some constraints to accommodate voice transmission beyond two hops due to the excessive transmission delay. In this paper, we propose a GTS allocation scheme for bidirectional voice traffic in IEEE 802.15.4 multihop networks with the goal of achieving fairness and optimization of resource allocation. The proposed scheme uses a greedy algorithm to allocate GTSs to devices for successful completion of voice transmission with efficient use of bandwidth while considering closest devices with another factor for starvation avoidance. We analyze and validate the proposed scheme in terms of fairness and resource optimization through numeral analysis.