• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.894-897
• /
• 2003

Recently, the rapid growth of mobile radio system has led to an increasing demand of low-cost high performance communication IC's. In this paper, we have designed RF front end for wireless LAN receiver employ zero-IF architecture. A low-noise amplifier (LNA) and double-balanced mixer is included in a front end. The zero-IF architecture is easy to integrate and good for low power consumption, so that is coincided to requirement of wireless LAN. But the zero-IF architecture has a serious problem of large offset. Image-reject mixer is a good structure to solve offset problem. Using offset compensation circuit is good structure, too. The front end is implemented in 0.25 ${\mu}m$ CMOS technology. The front end has a noise figure of 5.6 dB, a power consumption of 16 mW and total gain of 22 dB.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.37-42
• /
• 2004

The Ministry of Maritime Affairs ＆ Fisheries have plaining the advancing fishery information integrated system for the fishing present condition, marine resource administration and applicability considering. The fishery information communication system is build up to the raw data ＆ process-network-content. The communication system must be small size, low cost and adapted SSB transceiver, that is using fishery shipping. In this paper We present digital data communication network to exchange information for fishery and safety between fishing ship and coast station in cheeper communication fee using SSB in HF band.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1293-1302
• /
• 2014

A flyback inverter using voltage sensorless maximum power point tracking (MPPT) for photovoltaic (PV) AC modules is presented. PV AC modules for a power rating from 150 W to 300 W are generally required for their small size and low price because of the installation on the back side of PV modules. In the conventional MPPT technique for PV AC modules, sensors for detecting PV voltage and PV current are required to calculate the PV output power. However, system size and cost increase when the voltage sensor and current sensor are used because of the addition of the auxiliary circuit for the sensors. The proposed method uses only the current sensor to track the MPP point. Therefore, the proposed control method overcomes drawbacks of the conventional control method. Theoretical analysis, simulation, and experiment are performed to verify the proposed control method.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.1
• /
• pp.10-18
• /
• 2014

From the perspective of reducing the sampling cost of color images at high resolution, block-based compressive sensing (CS) has attracted considerable attention as a promising alternative to conventional Nyquist/Shannon sampling. On the other hand, for storing/transmitting applications, CS requires a very efficient way of representing the measurement data in terms of data volume. This paper addresses this problem by developing a measurement-coding method with the proposed customized Huffman coding. In addition, by noting the difference in visual importance between the luma and chroma channels, this paper proposes measurement coding in YCbCr space rather than in conventional RGB color space for better rate allocation. Furthermore, as the proper use of the image property in pursuing smoothness improves the CS recovery, this paper proposes the integration of a low pass filter to the CS recovery of color images, which is the block-based ${\ell}_{20}$-norm minimization. The proposed coding scheme shows considerable gain compared to conventional measurement coding.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.638-648
• /
• 2013

Together with the GPS-based approach, geo-location through mobile communication networks is a key technology for location-based service. To save the cost, most geo-location system is implemented on the existed network service, which has a cellular structure. Still, multilateration is limited in cellular structure because it is difficult for the mobile terminal to acquire distance measurements from multiple base stations. This low hearability in the receiver is caused by co-channel interference and multipath environment. Therefore, hearability enhancement is necessary for multilateration under multipath and interference environment. Former time domain based hearability methods were designed for real signals. However, orthogonal frequency division multiplexing (OFDM) signal, which its usage has been increased in digital wireless communication, is a complex signal. Thus, different hearability enhancement method is needed for OFDM signals. This paper proposes a hearability enhancement method for forward-link multilateration using OFDM signals, which employ interference cancellation and multipath mitigation. A novel interference cancellation and multipath mitigation strategy for complex-valued OFDM signals is presented that has an iterative structure. Simulation results show that the proposed multilateration method provides the user's position with an accuracy of less than 80m through the mobile WiMAX cellular network in multipath environment.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.443-448
• /
• 2004

The Ministry of Maritime Affairs & Fisheries have plaining the advancing fishery information integrated system for the fishing present condition, marine resource administration and applicability considering. The fishery info17nation communication system is build up to the raw data & process-network-content. The communication system must be small size, low cost and adapted SSB transceiver, that is using fishery shipping. In this paper We present digital data communication network to exchange information for fishery and safety between fishing ship and coast station in cheeper communication fee using SSB in HF band.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.61-64
• /
• 2011

In order to grow the crystalline solar cells industry continuously, development of alternate low-cost manufacturing processes is required. Plasma doping system is the technique for introducing dopants into semiconductor wafers in CMOS devices. In photovoltaics, plasma doping system could be an interesting alternative to thermal furnace diffusion processes. In this paper, plasma doping system was applied for phosphorus doping in crystalline solar cells. The Plasma doping was carried out in 1~4 KV bias voltages for four minutes. For removing surface damage and formation of pn junction, annealing steps were carried out in the range of $800{\sim}900^{\circ}C$ with $O_2$ ambient using thermal furnace. The junction depth in about $0.35{\sim}0.6{\mu}m$ range have been achieved and the doping profiles were very similar to emitter by thermal diffusion. So, It could be confirmed that plasma doping technique can be used for emitter formation in crystalline solar cells.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.75-80
• /
• 2003

The Ministry of Maritime Affairs ＆ Fisheries have plaining the advancing fishery information integrated system for the fishing present condition, marine resource administration and applicability considering. The fishery information communication system is build up to the raw date ＆ process-network-content. The communication system must be small size, low cost and adapted SSB transceiver, that is using fishery shipping. In this paper We present digital data communication network to exchange information for fishery and safety between fishing ship and coast station in cheeper communication free using SSB(Single Side Band) in HF(High Frequency) band.

• Journal of Digital Contents Society
• /
• v.7 no.2
• /
• pp.103-108
• /
• 2006

Short-range wireless communication and networking technologies are becoming increasingly important in enabling useful mobile applications. for example, ZigBee technology is expected to provide low cost and low power connectivity for equipment that needs battery life as long as several months to several years. In addition, ZigBee can be implemented in mesh networks larger than is possible with Bluetooth. The main features of this ZigBee standard are network flexibility, low cost, very low power consumption, and low data rate in an adhoc self-organizing network among fixed, portable and moving devices. Home network/Home automation is one of the key market areas for Zigbee, with an example of a simple network This paper investigates the effect of short range wireless channel on the performance of Zigbee system and DSSS-BPSK signal transmission in AWGN, interference and Rician fading environments. And we investigate performance degradation due to interference and fading effects in short range wireless channel. In particular, the impacts of the fading and interference level on the bit error probability is shown in BER performance figures.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.6
• /
• pp.553-561
• /
• 2012

Existing energy sources convert chemical energy into mechanical energy, while fuel cell directly generates electricity through an electrochemical reaction between hydrogen and oxygen. Therefore, it has a lot of strong points such as high efficiency, zero emission, and etc. In addition, with the development of hydrogen preservation technique, some companies have been researching and releasing portable fuel cell power packs for specific applications like military equipment, automobile, and so on. However, there are some drawbacks to the fuel cell, high cost and slow dynamic response. In order to compensate these weak points, auxiliary energy storages could be applied to the fuel cell system. In this paper, the optimum structure for a 150W portable fuel cell power pack with a battery pack is selected considering the specification of the system, and the design process of main parts is described in detail. Here, main objectives are compact size, simple control, high efficiency, and low cost. Then, an automatic mode change algorithm, which converts the operating mode depending on the states of fuel cell stack, battery pack, and load, is introduced. Finally, performance of the designed prototype using the automatic mode change control is verified through experiments.