• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.142-149
• /
• 2007

Wireless sensor network technology is an emerging technology consisting of small, low power, and low cost devices that integrate limited computation, sensing, and radio communication capabilities. An ad-hoc home network system based embedded system for home environment monitoring was fabricated and tested. The wireless sensor node consists of a MCU, RF transceiver and sensors (temperature, humidity and light). Wireless sensor nodes run application software for data sampling and wireless communication, that was developed using 'nesC language' which runs on TinyOS. In our tests, acquired sensors data were monitored on 6.4" TFT-LCD of base-station through IEEE802.15.4 standard wireless communication. Also, the sensor data can be monitored by client user at the terminal PC to monitor environmental status of home in real time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.1
• /
• pp.131-136
• /
• 2018

Reliable velocity estimation technology for trains is one of technologies used to operate trains safely and effectively. Various sensors such as tachometers, doppler radars, and global positioning systems are used to estimate velocity of a train. Tachometer is widely used to estimate velocity of a trains due to its simplicity, small volume, cost-effectiveness, continuously measurement at high speed, and robustness against noise. Accuracy in the velocity calculation using a tachometer depends on quantization error, measurement error of wheel radius or diameter, and tachometer's imperfection from manufacturing or installation process. In this paper, we present an accurate velocity estimation method using a low-resolution tachometer, which is commonly installed on a high-speed train. Baseline estimation method is proposed to accurately calculate the velocity of the high-speed train from tachometer's pulses. HEMU-430x test train is used for the experiment and verification of the proposed method. Experimental results with several routes show that the proposed method is more accurate than a conventional method.

• Journal of information and communication convergence engineering
• /
• v.18 no.3
• /
• pp.162-166
• /
• 2020

The present paper presents an array antenna of a microstrip patch for 5G applications. Four rectangular microstrip patch elements are arranged in parallel and series to form an array antenna. Two insets are made on both sides of each patch element to achieve a wide frequency bandwidth of 23.97-31.60 GHz. To attain a high gain and wider bandwidth, the microstrip patch antenna is fed using series and corporate feeding networks. Further, three director elements on top of the top-most patch elements, and one reflector element at the open end of each patch element, are added. The addition of the Yagi elements improved the overall gain and acquired a higher radiation efficiency throughout the operating frequency bandwidth, with the array antenna achieving a maximum peak gain of 8.7 dB. The proposed antenna is built on a low-loss and low-cost substrate of FR4-eproxy. The proposed antenna design with a simple structure is suitable for Internet of Things and 5G applications.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.422-429
• /
• 2013

Advances in wireless sensor network (WSN) technology have enabled small and low-cost sensors with the capability of sensing various types of physical and environmental conditions, data processing, and wireless communication. In the WSN, the sensor nodes have a limited transmission range and their processing and storage capabilities as well as their energy resources are limited. A triple umpiring system has already been proved for its better performance in WSNs. The clustering technique is effective in prolonging the lifetime of the WSN. In this study, we have modified the ad-hoc on demand distance vector routing by incorporating signal-to-noise ratio (SNR) based dynamic clustering. The proposed scheme, which is an efficient and secure routing protocol for wireless sensor networks through SNR-based dynamic clustering (ESRPSDC) mechanisms, can partition the nodes into clusters and select the cluster head (CH) among the nodes based on the energy, and non CH nodes join with a specific CH based on the SNR values. Error recovery has been implemented during the inter-cluster routing in order to avoid end-to-end error recovery. Security has been achieved by isolating the malicious nodes using sink-based routing pattern analysis. Extensive investigation studies using a global mobile simulator have shown that this hybrid ESRP significantly improves the energy efficiency and packet reception rate as compared with the SNR unaware routing algorithms such as the low energy aware adaptive clustering hierarchy and power efficient gathering in sensor information systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.447-450
• /
• 2005

This paper describes an implementation of system based on ZIGBEE wireless communication technique to prevent for diseases of skin ailments and respiratory ailments as sensing the air pollutions that breaks out in the inside and purifying. ZIGBEE wireless communication technique has features - low battery consumption, low cost, acceptance of the maximum 256 node and simple protocol structure of below 32Kbyte. Hardware platform is implemented by using ATmega128L in ATmel corporation and 2.4GHz RF-IC CC2420 in Chipcon corporation and dust sensor(GP2Y1010AU) and gas sensor(GSBT11) that confirm degree of inside air pollution for ZIGBEE wireless communication technique.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.3
• /
• pp.63-73
• /
• 2004

This paper proposes an efficient authentication scheme for multicast packet using recovery layer to provide source authentication. The problems of the existing schemes are as follows ： TESLA requires time synchronization between the sender and the receiver, md hash-based schemes have high communication overheads due to additional hash values and require many buffers and delay for verification on receivers. Our main focus is reducing the buffer size, communication and computation burden of the receiver. The proposed scheme in this paper is highly robust to packet loss using the recovery layer based on XOR operation. It also provides low communication overhead, low verification cost, non-repudiation of the origin, immediate verification and robustness against DoS attack on the receiver.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.54-67
• /
• 2006

Low Rate WPAN (Wireless Personal Area Network) designed for low power and low cost wireless communication is an important technology to realize ubiquitous environment. IEEE 802.15.4 and ZigBee Alliance recommend the SKKE (Symmetric-Key Key Establishment) protocol for key establishment and management. The SKKE algorithm has security weakness such as the absence of authentication process or electric signature in key generation and exchange when devices join the role of coordinators. In this paper, we propose new key establishment and security algorithm based on public key encryption to solve low rate WPAN security problems. Also, to improve PLC AMR system's weaknesses in communication reliability and security, we propose a new AMR system model based on IEEE 802.15.4 and we apply our security algorithm to AMR profile for security enhancement.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5143-5147
• /
• 2014

Cervical cancer screening in Malaysia is by opportunistic Pap smear which contributes to the low uptake rate. To overcome this, a pilot project called the SIPPS program (translated as information system of Pap smear program) had been introduced whereby women aged 20-65 years old are invited for Pap smear and receive recall to repeat the test. This study aimed at determining which recall method is most cost-effective in getting women to repeat Pap smear. A randomised control trial was conducted where one thousand women were recalled for repeat smear either by registered letter, phone messages, phone call or the usual postal letter. The total cost applied for cost-effectiveness analysis includes the cost of sending letter for first invitation, cost of the recall method and cost of two Pap smears. Cost-effective analysis (CEA) of Pap smear uptake by each recall method was then performed. The uptake of Pap smear by postal letter, registered letters, SMS and phone calls were 18.8%, 20.0%, 21.6% and 34.4%, respectively (p<0.05). The CER for the recall method was lowest by phone call compared to other interventions; RM 69.18 (SD RM 0.14) compared to RM 106.53 (SD RM 0.13), RM 134.02 (SD RM 0.15) and RM 136.38 (SD RM 0.11) for SMS, registered letter and letter, respectively. ICER showed that it is most cost saving if the usual method of recall by postal letter be changed to recall by phone call. The possibility of letter as a recall for repeat Pap smear to reach the women is higher compared to sending SMS or making phone call. However, getting women to do repeat Pap smear is better with phone call which allows direct communication. Despite the high cost of the phone call as a recall method for repeat Pap smear, it is the most cost-effective method compared to others.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.616-620
• /
• 2006

IEEE 802.15.4 is designed for low-rate wireless personal area networks (LR_WPAN) and it attempts to provide a low data rate, low power, low cost wireless networking on the device-level communication. In this paper, I have established a realistic environment for the effect of collision in nonbeacon-enabled mode and beacon enabled mode. The data throughput and delivery ratio are investigated as the performance metrics.

• International Journal of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.116-121
• /
• 2020

With the recent development of the 4th Industrial Revolution, efforts have been made to carry out communication in a smart factory, farm, etc. at low cost and reliably. Methods for utilizing empty frequencies using TVWS(TV White Space) have been studied which can be used locally within 30 km. However, there have not been many studies on Path-Loss model considering Korean environment. In this paper, the Path-Loss model is divided into LOS (Line Of Sight) and NLOS (None LOS). In case of LOS model, we checked the difference between Free space model, Friis model, 2-ray model and Hata model with measured data. In the case of NLOS model, we checked the difference between Lee Model, ITU-R526-3 Model with measured data. In order to overcome the difference in Korean environment, we derived a model that can be applied in LOS and NLOS and prove its usefulness through performance evaluation through simulation.