• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.1
• /
• pp.94-103
• /
• 2022

As a large amount of data generated by sensors or devices at the manufacturing site is transmitted to the server or client, problems arise in network processing time delay and storage resource cost increase. To solve this problem, considering the manufacturing site, where real-time responsiveness and non-disruptive processes are essential, QRC (Quotient Remainder Compression) and BL_beta compression algorithms that enable real-time and lossless compression were applied to actual manufacturing site sensor data for the first time. As a result of the experiment, BL_beta had a higher compression rate than QRC. As a result of experimenting with the same data by slightly adjusting the data size of QRC, the compression rate of the QRC algorithm with the adjusted data size was 35.48% and 20.3% higher than the existing QRC and BL_beta compression algorithms.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.6
• /
• pp.492-505
• /
• 2022

This study is a study on the results of improving the logic to effectively transmit and decode compressed data in real time by improving the encoding and decoding performance of BL-beta codes that can be used for lossless real-time transmission of IoT sensing data. The encoding process of BL-beta code includes log function, exponential function, division and square root operation, etc., which have relatively high computational burden. To improve them, using bit operation, binary number pattern analysis, and initial value setting of Newton-Raphson method using bit pattern, a new regularity that can quickly encode and decode data into BL-beta code was discovered, and by applying this, the encoding speed of the algorithm was improved by an average of 24.8% and the decoding speed by an average of 5.3% compared to previous study.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.3
• /
• pp.379-392
• /
• 2024

With the rapid increase in data, saving storage space and improving the efficiency of data transmission have become critical issues, making the research on the efficiency of data compression technologies increasingly important. Lossless algorithms can precisely restore original data but have limited compression ratios, whereas lossy algorithms provide higher compression rates at the expense of some data loss. There has been active research in data compression using deep learning-based algorithms, especially the autoencoder model. This study proposes a new side-channel analysis data compressor utilizing autoencoders. This compressor achieves higher compression rates than Deflate while maintaining the characteristics of side-channel data. The encoder, using locally connected layers, effectively preserves the temporal characteristics of side-channel data, and the decoder maintains fast decompression times with a multi-layer perceptron. Through correlation power analysis, the proposed compressor has been proven to compress data without losing the characteristics of side-channel data.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.290-297
• /
• 2009

This paper presents an improved adaptive multi-rate wideband (AMR-WB) algorithm for the efficient Text-To-Speech (TTS) database compression. The proposed algorithm includes unnecessary common bit-stream (CBS) removal and parameter delta coding combined with speaker-dependent huffman coding to reduce the required bit-rate without any quality degradation. We also propose lossy coding schemes to produce the maximum bit-rate reduction with negligible quality degradation. The proposed lossless algorithm including CBS removal can reduce bit-rate by 12.40% without quality degradation compared with the 12.65 kbps AMR-WB mode. The proposed lossy algorithm can reduce bit-rate by 20.00% with 0.12 PESQ degradation.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2011-2018
• /
• 2024

Since RF breakdown is one of the primary limitations to improving the performances of RF accelerators, extensive efforts have been dedicated to locating the breakdowns. However, most existing methods rely on specialized techniques, resulting in high financial burdens. Although the method based on transient response of transmission line (TL) is suitable for facilities with sporadic recoverable breakdowns, practical operations are susceptible to notable errors. This study revisits the fundamental theories of lossless TL and investigates the wave process to understand the characteristics of the reversed pulse induced by the breakdowns. By utilizing steadystate response of the TL and employing phasor method, we derive analytical formulas to determine the exact location of breakdowns within the faulty cell for constant-gradient TW accelerator. Furthermore, the derived formulas demonstrate their independence from RF phase, thereby distinguishing them from traditional phasebased methods. Additionally, experimental validations are conducted at the HUST injector, and the results confirm the consistency of the analysis. Thus, the proposed method represents a promising improvement over the TL-based approaches and serves as a valuable complement to current techniques. Importantly, this method demonstrates particular advantages for constructed TW accelerators seeking to achieve a balance among high performance, low costs, and compact layouts.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.21-28
• /
• 2006

In this paper, the proposed full-bridge high frequency isolated zoo voltage and zero current switching phase shifted pulse width modulation(ZVZCS PS-PWM)DC-DC converter among fuel cell generation system consist of 1.2[kW] fuel cell of Nexa Power Module, full-bridge DC-DC converter to boost the fuel cell low voltage($28{\sim}43[%]$) to 380[VDC] and a single phase full-bridge inverter is implemented to produce AC output(220[VAC], 60[Hz]). A tapped inductor filter with freewheeling diode is newly implemented in the output filter of the proposed full-bridge high frequency isolated ZVZCS PS-PWM DC-DC converter to suppress circulating current under the wide output voltage regulation range, thus to eliminate the switching and transformer turn-on/off over-short voltage or transient phenomena. Besides the efficiency of $93{\sim}97[%]$ is obtained over the wide output voltage regulation ranges and load variations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.17-24
• /
• 2004

In this paper, the wavelet video coding using Low-Band-Shift(LBS) method and multiresolution motion estimation(MRME) is proposed. To overcome shift- variant property on wavelet coefficients, the LBS was proposed. LBS method previously has superior performance in terms of rate-distortion characteristic. However, this method needs more memory and computational complexity. Therefore to reduce computational complexity of video coding using LBS, we combine MRME with LBS. When mm is applied only, it has 7 times as much as existing method's motion vector because each subband has different motion vector using property of LBS, number of motion vector decreases. Proposed method decreases motion vector, and it decreases motion compensated Prediction error by detailed motion estimation. And then it shows better coding performance. Also this method reduces computational amount by smaller search area in higher resolution. The computational complexity of the proposed method is 12.1% of that of existing method at 3-level wavelet transform. The experimental results with the proposed method show about 0.2∼9.7% improvement of MAD performance in case of lossless coding, and 0.1∼2.0㏈ improvement of PSNR performance at 4he same bit rate in case of lossy coding.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.5
• /
• pp.25-33
• /
• 2010

Multi-media service has been changed into user based audio services, which service supports actively user's preference and interaction with the users. In the market, multi-media products which can support the highest audio-quality by using lossless audio technology have been released and object audio music which user can select the objects has been serviced. In this paper, we design user's preference information based object audio file format and audio scene description for storage and transmission media. The designed file format is designed based on MPEG-4 file format because high-quality audio codecs in MPEG-4 audio can be easily used and the track of file format can be flexibly controlled depend on the number of the instrument in music. The encoded audio data of each objects and encoded audio scene description by binary encoding that has independent track are packed in a file. The scene description for storage media is consist of full and object scene description, the scene description for transmission media has an essential description for object audio operation and a specific description for real audio sound. The designed file format based simulator is developed and it generates an object audio file with several scene descriptions. Also, the real audio sound is serviced by the interaction with user and the unpacked scene description.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.37-47
• /
• 2016

The practical constraints on the commercial FPGAs which contain dedicated wide function multiplexers in their slice structure are incorporated with one of the most advanced FPGA mapping algorithms based on the AIG (And-Inverter Graph), one of the best logic representations in academia. As the first step of the mapping process, cuts are enumerated as intermediate structures. And then, the cuts which can be mapped to the multiplexers are recognized. Without any increased complexity, the delay and area of multiplexers as well as LUTs are calculated after checking the requirements for the tree construction such as symmetry and depth limit against dynamically changing mapping of neighboring nodes. Besides, the root positions of multiplexer trees are identified from the RTL code, and annotated to the AIG as AOs (Auxiliary Outputs). A new AIG embedding the multiplexer tree structures which are intentionally synthesized by Shannon expansion at the AOs, is overlapped with the optimized AIG. The lossless synthesis technique which employs FRAIG (Functionally Reduced AIG) is applied to this approach. The proposed approach and techniques are validated by implementing and applying them to two RISC processor examples, which yielded 13~30% area reduction, and up to 32% delay reduction. The research will be extended to take into account the constraints on the dedicated hardware for carry chains.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1128-1134
• /
• 2014

In this paper, the effects of a metamaterial slab with negative permeability in a magnetically coupled wireless power transfer system (WPT) in the overall performance are analyzed quantitatively in terms of the effective quality factors of the loop resonators and coupling coefficient considering the slab losses, based on an equivalent circuit. Using the ideal metamaterial slab(lossless slab), the WPT efficiency is improved considerably by the magnetic flux focusing. However, the practical lossy slab made of RRs or SRRs limits the significant enhancement of WPT efficiency due to the relatively high losses in the slab consisting of RRs or SRRs near the resonant frequency. For the practical loop resonator, other than a point magnetic charge, using the practical lossy metamaterial slab in order to improve the transfer efficiency, the width of the slab needs to be optimized somewhat less than the half of the distance between two loop resonators. For the low-loss slab with its loss tangent of 0.001, the WPT efficiency is maximized at 93 % when the ratio of the slab width and the distance between the two resonators is approximately 0.35, compared with 53 % for the case without the slab. The efficiency in case of employing the high-low slab(loss tangent: 0.2) is maximized at 61 % when the slab ratio is 0.25.