• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1277-1288
• /
• 2018

In this work, the reactor kinetics capability is used to compute the design safety parameters in a PWR due to complete loss of coolant flow during protected and unprotected accidents. A thermal-hydraulic code coupled with a point reactor kinetic model are used for these calculations; where kinetics parameters have been developed from the neutronic SRAC code to provide inputs to RELAP5-3D code to calculate parameters related to safety and guarantee that they meet the regulatory requirements. In RELAP5-3D the reactivity feedback is computed by both separable and tabular models. The results show the importance of the reactivity feedback on calculating the power which is the key parameter that controls the clad and fuel temperatures to maintain them below their melting point and therefore prevent core melt. In addition, extending modeling capability from separable to tabular model has nonremarkable influence on calculated safety parameters.

• Journal of Korean Neurosurgical Society
• /
• 제63권6호
• /
• pp.806-813
• /
• 2020

Objective : Lumbar disc herniation (LDH) is a common disease, and lumbar discectomy (LD) is a common neurosurgical procedure. However, there is little previous data on return to work (RTW) after LD. This study investigated the period until the RTW after LD prospectively. Clinically, the pain state at the time of RTW also checked. RTW failure rate 6 months after surgery also investigated. Methods : Patients with daily/regular jobs undergoing LD between September 2014 and December 2018 were enrolled. Pain was assessed by the Oswestri Disability Index (ODI) and the Numeric Rate Scale (NRS). Employment type was divided into self-employed, regular and contracted. Monthly telephone interviews were conducted to check RTW status and self-estimated work capability after surgery. Results : Sixty-seven patients enrolled in this study. Three patients failed to RTW, and three others resigned within 6 months after surgery. The preoperative NRS and ODI were 7.2±1.2 and 22.1±7.9, respectively. The average time to RTW was 5.1±6.0 weeks. At RTW, NRS was 1.5±1.8 and ODI was 6.3±3.9. Amongst patients that successfully returned to work were 16 self-employed workers, 42 regular employees, and three contracted workers. The time to RTW of self-employed, regular, and contracted workers were 5.9±8.8, 4.2±4.3 and 13.3±2.3 weeks, respectively (p=0.011). Thirty-six of the patients that returned to work self-reported a 22.8±15.6% reduction in work capability at 6 months. Conclusion : RTW may vary depending on the employment status. In this study, we found that while employment type may affect the length to RTW, most patients were able to RTW and >40% of patients reported no loss of work capabilities 6 months postoperatively, hopefully alleviating some patient hesitation towards LD.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1085-1089
• /
• 2007

An acoustic topology optimization method is developed to optimize the acoustic attenuation capability of a muffler. The transmission loss of the muffler is calculated by using the three-point method based on finite element analysis. Each element of the finite element model is assumed to have the variable acoustic properties, which are penalized by a carefully-selected interpolation function to yield clear expansion chamber shapes at the end of topology optimization. The objective of the acoustic topology optimization problem formulated in this work is to maximize the transmission loss at a target frequency. The transmission loss value at a deep frequency of a nominal muffler configuration can be dramatically increased by the proposed optimization method. Optimal muffler configurations are also obtained for other frequencies.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권6호
• /
• pp.563-576
• /
• 2016

The flight deck of an aircraft carrier is relatively vulnerable compared to its hull, as the damage of some subsystems on the flight deck may cause the carrier losing its operational capability. Therefore, this work aims to represent a simulative method for evaluating the resistance of the flight deck's operational capability in the condition that the aircraft carrier is together with its strike group and the enemy uses the anti-ship missiles with the cluster warheads to attack. In the simulations, the susceptibility of the carrier and the vulnerability of the aircraft guarantee resources are gained. Then, with the help of the closed queuing network, the residual sortie generation rate can be solved, which reflects the flight deck's residual operational capability. The results have proven that the flight deck is of strong resistance to these attacks while it is very sensitive to the loss of some key aircraft guarantee resources.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권1호
• /
• pp.86-97
• /
• 2005

Nowadays, Water Mist Fire Extinguishing System is increasingly used in maritime field for various application. The fire extinguishing capability of the system should be verified by hydraulic calculation in the same manner as the conventional water based fire extinguishing system such as sprinkler system. water spray system and etc. Additionally, the review of effectiveness of friction loss calculation method used for hydraulic calculation is needed because the pipe flow characteristic of its piping system has higher Reynolds number than that of the conventional system. In this paper the review work was carried out based on the NFPA Code 750.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2145-2157
• /
• 2018

Congestion Management (CM) is an attractive research area in the electrical power transmission with the power compensation abilities. Reconfiguration and the Flexible Alternating Current Transmission Systems (FACTS) devices utilization relieve the congestion in transmission lines. The lack of optimal power (real and reactive) usage with the better transfer capability and minimum cost is still challenging issue in the CM. The prediction of suitable place for the energy resources to control the power flow is the major requirement for power handling scenario. This paper proposes the novel optimization principle to select the best location for the energy resources to achieve the real-reactive power compensation. The parameters estimation and the selection of values with the best fitness through the Symmetrical Distance Travelling Optimization (SDTO) algorithm establishes the proper controlling of optimal power flow in the transmission lines. The modified fitness function formulation based on the bus parameters, index estimation correspond to the optimal reactive power usage enhances the power transfer capability with the minimum cost. The comparative analysis between the proposed method with the existing power management techniques regarding the parameters of power loss, cost value, load power and energy loss confirms the effectiveness of proposed work in the distributed renewable energy systems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.728-733
• /
• 2008

Though multi-panel structures lined with a poroelastic material have been widely used to reduce sound transmission in various fields, most of the previous works to design them were conducted by repeated analyses or experiments based on initially given configurations or sequences. Therefore, it was difficult to obtain the optimal sequence of multi-panel structures lined with a poroelastic material yielding superior sound isolation capability. In this work, we propose a new design method to sequence a multi-panel structure lined with a poroelastic material having maximized sound transmission loss. Being formulated as a one-dimensional topology optimization problem for a given target frequency, the optimal sequencing of panel-poroelastic layers is systematically carried out in an iterative manner. In this method, a panel layer is expressed as a limiting case of a poroelastic layer to facilitate the optimization process. This means that main material properties of a poroelastic material are treated as Interpolated functions of design variables. The designed sequences of panel-poroelastic layers were shown to be significantly affected by the target frequencies; more panel layers were used at higher target frequencies. The sound transmission loss of the system was calculated by the transfer matrix derived from Biot's theory.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1262-1269
• /
• 2008

Though multilayered foam-panel structures have been widely used to reduce sound transmission in various fields, most of the previous works to design them were conducted by repeated analyses or experiments based on initially given configurations or sequences. Therefore, it was difficult to obtain an optimal sequence of multilayered foam-panel structure yielding superior sound isolation capability. In this work, we propose a new design method to sequence a multi-panel structure lined with a poroelastic material having maximized sound transmission loss. Being formulated as a one-dimensional topology optimization problem fur a given target frequency, the optimal sequencing of panel-poroelastic layers is systematically carried out in an iterative manner. In this method, a panel layer is expressed as a limiting case of a poroelastic layer to facilitate the optimization process. This means that main material properties of a poroelastic material are treated as interpolated functions of design variable. The designed sequences of panel-poroelastic multilayer were shown to be significantly affected by the target frequencies; more panels were obtained at higher target frequency. The sound transmission loss of the system was calculated by the transfer matrix derived from Biot's theory.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.180-187
• /
• 2009

When converters operate in megahertz range, the passive components and magnetic devices generate high losses. However, the eddy current issues and choices of magnetic cores significantly affect on the design stage. Apart from that, the components' reduction, miniaturization technique and frequency scaling are required as well as improvement in thermal capability, integration technique, circuit topologies and PCB layout optimization. In transformer design, the winding and core losses give great attention to the design stage. From simulation work, it is found that E-25066 material manufactured by AVX could be the most suitable core for high frequency transformer design. By employing planar geometry topology, the material can generate significant power loss savings of more than 67% compared to other materials studied in this work. Furthermore, young researchers can use this information to develop new approaches based on concepts, issues and methodology in the design of magnetic components for high frequency applications.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3379-3397
• /
• 2021

In this study, a multi-physics modeling method was developed to analyze a nuclear fuel rod's thermo-mechanical behavior especially for high temperature anisotropic creep deformation during ballooning and burst occurring in Loss of Coolant Accident (LOCA). Based on transient heat transfer and nonlinear mechanical analysis, the present work newly incorporated the nuclear fuel rod's special characteristics which include gap heat transfer, temperature and burnup dependent material properties, and especially for high temperature creep with material anisotropy. The proposed method was tested through various benchmark analyses and showed good agreements with analytical solutions. From the validation study with a cladding burst experiment which postulates the LOCA scenario, it was shown that the present development could predict the ballooning and burst behaviors accurately and showed the capability to predict anisotropic creep behavior during the LOCA. Moreover, in order to verify the anisotropic creep methodology proposed in this study, the comparison between modeling and experiment was made with isotropic material assumption. It was found that the present methodology with anisotropic creep could predict ballooning and burst more accurately and showed more realistic behavior of the cladding.