• Journal of Ecology and Environment
• /
• v.37 no.2
• /
• pp.91-97
• /
• 2014

Little is known about how the increased porosity of a deciduous windbreak, which results from loss of leaves, influences wind speed reduction. We hypothesized that, with loss of foliage, the wind speed reduction effectiveness of a deciduous windbreak decreases on near leeward side but not on further leeward side and that wind speed recovers faster in the full foliage season than in other seasons. During summer, autumn, and winter (full, medium, and non-foliage season, respectively), we observed wind speed and direction around a deciduous windbreak in a traditional Korean village on windward and near and further leeward sides (at -8H, 2H, and 6H; H = 20 m, a windbreak height). We used a linear mixed effects model to determine that the relative wind speed reduction at 2H significantly decreased from 83% to 48% ($F_{2,111.97}=73.6$, P < 0.0001) with the loss of foliage. However, the relative wind speed reduction at 6H significantly increased from 26% to 43% ($F_{2,98.54}=18.5$, P < 0.0001). Consequently, wind speed recovery rate between 2H and 6H in summer was two times higher than in autumn and ten times higher than in winter ($F_{2,102.93}=223.1$, P < 0.0001). These results indicate that deciduous windbreaks with full foliage seem to induce large turbulence and increase wind speed recovery rate on leeward side. Our study suggests that further research is needed to find the optimal foliage density of a deciduous windbreak for maximizing windbreak effectiveness regardless of seasonal foliage changes.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.4
• /
• pp.520-531
• /
• 2018

Aim of this study is to investigate the perception and purchasing status of functional beverages for adults in the Chungnam area. In this case, the reasons to buy the functional beverages for men were 'recovery of fatigue (43.1%)', 'quenching thirst (21.6%)', 'health promotion (19.6%)', 'supply of nutrition (15%)', and 'a loss in weight (7%)'. Otherwise the reasons to buy the functional beverage for women showed to be 'recovery of fatigue (28.6%)', 'health promotion (26.4%)', 'quenching thirst (22.1%)', 'supply of nutrition (12.9%)', and 'a loss in weight (10%)', which were significant different between the men and women subjects. The place to buy functional beverages was for singles (46.5%) a store and for married person a supermarket. The purchase of functional beverages was affected by as follows; manufactured date > original granule > nutrition sign > country > price > taste > brand > scent > color and the women are affected more than men. For functional beverages, the men preferred to buy an energy drink and vitamin drink more than the women. After the intake of functional beverages, the men and women recognized the effect on 'recovery of fatigue' and 'a loss of weight/release of a feeling of hunger/improvement of constipation', respectively. Considering the results of the study, it is necessary to clarify the function of functional beverages so that consumers can choose and take the correct functional beverage by themselves. In addition, the nutritional education should be conducted for the intake allowance for the compositions and excessive or inadequate intake of functional beverages.

• Journal of Korea Multimedia Society
• /
• v.5 no.1
• /
• pp.68-76
• /
• 2002

Multicast in mobile host has the problem of hast mobility, multicast decision, triangle routing, tunnel convergence, implosion of retransmission, and bandwidth waste. In particular, the bandwidth waste in radio is a definite factor that decreases transmission rate. To solve the problems, this paper proposes a new multicast transmission protocol called FIM(Forward Error Correction Integrated Multicast), which supports reliable packet recovery mechanism by integrating If Mobility Support for the host mobility, IGMP(Interned Group Management Protocol) for the group management, and DVMRP(Distance Vector Multicast Routing Protocol) for the multicast routing, and it also uses FEC and the local recovery method based on receiver. The performance measurement is performed by dividing the losses into the homogeneous independent loss, the heterogeneous independent loss, and the shared source link loss model.. The result shows that the performances improves in proportion to the size of local areal group when the size of transmission group exceeds designated size. This indicates FIM is effective in the environment where there are much of data and many receivers in the mobile host.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.98-107
• /
• 2008

In mobile ad hoc networks, packet loss is unavoidable due to MAC contention, link failure or the inherent characteristics of wireless link. Since TCP relies on the timely reception of TCP ACK packets to progress the transmission of the TCP DATA packets, ACK loss obviously affects the performance due to two main problems: (a) Frequent occurrence of spurious retransmissions caused by timeout events and (b) impairment of the fast retransmit mechanism caused by the lack of a sufficient number of duplicate ACK packets. In particular, since most reactive routing protocols force the packets buffered over a path to be discarded while performing a route recovery, the performance degradation becomes more serious due to such ACK loss. In this paper, therefore, TCP with two piggybacking schemes (called TCP-pgy) is proposed in order to resolve the above-mentioned problems over reactive routing protocols. Through extensive simulations using the ns-2 simulator, we prove that our proposed schemes contribute to TCP performance improvements.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.407-415
• /
• 2003

As services requesting data transfer from a sender to a multiple number of receivers become popular, efficient group communication mechanisms like multicast get much attention. Since multicast is more efficient than unicast in terms of bandwidth usage and group management for group communication, many multicast protocols providing scalability and reliability have been proposed. Recently, router-supported reliable multicast protocols have been proposed because routers have the knowledge of the physical multicast tree structure and, in this scheme, repliers which retransmit lost packets are selected by routers. Repliers are selected dynamically based on the network situation, therefore, any receiver within a multicast group can become a replier Hence, all receivers within a group maintains a buffer for loss recovery within which received packets are stored. It is an overhead for all group receivers to store unnecessary packets. Therefore, in this paper, we propose a new scheme which reduces resource usage by discarding packets unnecessary for loss recovery from the receiver buffer. Our scheme performs the replier selection and the loss recovery of lost packets based on the LSM [1] model, and discards unnecessary packets determined by ACKs from erasers which represent local groups.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.56-80
• /
• 1977

This experimental work was conducted in order to find out the optimum time of harvest of Japonica-type (Akibare) and Indica-type(Tong-il) rice variety for three harvesting systems by investigating the harvesting losses and milling quality. The study was also concerned about the nature and amount of grain losses incurred during the each sequence of post-harvest technologies, and based on these result, a modification of existing systems giving a minimum grain loss was attempted. Binder, combine, and traditional systems were tested in this study and five grain moisture levels were disposed according to the decrease of grain moisture . The results are summarized as follows ; 1. The total losses of Akibare variety were ranged from 1.1 to 1.5 per cent for the traditional harvesting system , 2.1 to 4.8 per cent for the harvesting system by use of binder, and 2.8 to 4.3 per cent for the harvesting system by use of combine as the grain moisture content was reduced from 24 to 15 percent. Milling recovery of the harvesting system by use of binder, 74.8 ∼75.7 percent, was a little higher as it was compared to that of traditional harvesting system, 74.3 ∼75.0per cent, and that of the harvesting system by use of combine, 73.8 ∼75.0 per cent. Head rice recovery of mechanically dried paddy samples was higher than that of sun-dried paddy samples. 2. The total losses of Tong-il variety were ranged from 3.8 to 5.0 per cent for the traditional harvesting system, 5.2 to 10.0 percent for the system by use of binder, and 3.0 to 5.0 per cent for the system by use of combine as the grain moisture was reduced from 28 to 16 per cent. 3. Milling recovery of Tong-il variety harvested by the traditional harvesting system was 72.3 ∼73.6 percent and it was lower when compared to that of 72.3∼75.0 per cent harvested by binder, and 73.0∼74.6 percent harvested by combine. 4. Head rice recovery of Tong-il variety harvested by the traditional harvesting system (58.

• Food Science of Animal Resources
• /
• v.35 no.1
• /
• pp.50-57
• /
• 2015

Fish sarcoplasmic protein (SP) is currently dumped as waste from surimi industry and its recovery by practical method for being the non-meat ingredient in meat industry would be a strategy to utilize effectively the fish resource. This study was aimed to apply pH treatment for fish SP recovery and evaluated its effect on pork myofibrillar protein (MP) gel. The pH values of fish SP were changed to 3 and 12, and neutralized to pH 7 before lyophilizing the precipitated protein after centrifugation. Acid-treated fish SP (AFSP) showed about 4-fold higher recovery yield than that of alkaline-treated SP and water absorption capacity was also about 1.2-fold greater. Because of the high recovery yield and water absorption capacity, AFSP was selected to incorporate into MP with/without microbial transglutaminase (MTG). The effects of AFSP and MTG on the physicochemical and rheological characteristics of MP and MP gel were evaluated. MTG induced an increase shear stress of the MP mixture and increase the breaking force of MP gels. MP gel lightness was decreased by adding AFSP. MP gel with MTG showed higher cooking loss than that without MTG. A reduction of cooking loss was observed when the AFSP was added along with MTG, where the insoluble particles were found. Therefore, AFSP could be contributed as a water holding agent in meat protein gel.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.103-109
• /
• 2015

A heat recovery steam generator consists of inlet expansion duct and heat transfer tube bank modules. For the enhancement of heat transfer in the tube bank modules, the flow should be uniform before the 1st heat transfer tube bank module. The present study has been carried out to analyze the flow characteristics in the inlet expansion duct of a heat recovery steam generator by using numerical flow analysis. The aim of the present study is to establish the proper heat transfer mechanism in the heat transfer tube bank modules by the comparison of the heat transfer models, the case with the constant heat loss per unit volume and the case with heat loss by using inner and outer convective heat transfer coefficient of heat transfer tube. From the present research, it could be seen that the heat transfer mechanism with using inner and outer convective heat transfer coefficient derives more proper temperature distribution results and the acceptance criteria of the temperature distribution within ${\pm}10^{\circ}C$ before SCR is satisfied with using this heat transfer mechanism.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.37-50
• /
• 1993

To evaluate the sequence of event and the Thermohydraulic behavior during total loss of feedwater accident and recovery procedure, a RELAP5/MOD3 calculation is performed and compared with the LOFT L9-l/L3-3 experiment. Also, the predictability of the code for the major Thermohydraulic phenomena following the accident is assessed. As a result, it is found that a pressure control using the spray until the time the water level reaches the top of the pressurizer, an overpressure protection by pressurizer PORV, a recovery of the secondary heat removal capability by refilling steam generator, and an effective cooldown by the continued natural circulation can be performed without core uncovery. It is also found that the plant-specific evaluation is necessary to confirm the effectiveness of the current symptom-oriented emergency operating procedure, especially in an overpressure protection performance and steam generator recovery performance.

• Journal of Power Electronics
• /
• v.4 no.1
• /
• pp.39-45
• /
• 2004

A novel current-fed energy-recovery sustaining driver (CFERSD) for a PDP is proposed in this paper. Its main idea is to recover the energy stored in the PDP or to inject the input source energy to the PDP by using the current source built-up in the energy recovery inductor. This method provides zero-voltage-switching (ZVS) of all main power switches, the reduction of EMI, and more improved operational voltage margins with the aid of the discharge current compensation. In addition, since the current flowing through the energy recovery inductor can compensate the plasma discharge current flowing through the conducting power switches, the current stress through all main power switches can be considerably reduced. Furthermore, it features a low conduction loss and fast transient time. Operations, features and design considerations are presented and verified experimentally on a 1020${\times}$l06mm sized PDP, 50kHz-switching frequency, and sustaining voltage 140V based prototype.