• 한국식생활문화학회지
• /
• 제12권4호
• /
• pp.419-421
• /
• 1997

Washing water volume of rice for cooking and rice weight for one person per meal in one household were surveyed for confirming pollution by the washing water and total losses by rice washing procedures. The mean size of a family was 4.64 persons and the mean consumption weight of rice per capital per meal was 138.43g. It is used 0.782 L of water for washing the rice per capital share. The washing water of rice was composed of 0.32% of total solid, 0.11% of soluble solid and 1.65% of solid loss to rice, and COD and BOD of it were 2.400 and 3.564 ppm respectively. Based on total population in Korea, 41 miliion, excepting age below 4, total cost for washing water of rice summed up about 1,495 billion won including 8.8 billion won for tap water cost, 11.7 billion won for waste water treatment, and 129 billion for solid loss of rice.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2004년도 춘계학술대회
• /
• pp.303-307
• /
• 2004

Is not used by consistency transport at transport of freight nothing but is using Pallet only by pedestal when work palletized unit load or materials handling when keep simplicity receptacle which fill raw material or product in factory in our country. Therefore, pallet that is most important function of Pallet is not empled circulation to end consumer from manufacturing plant which is circulation process whole path being done and factory. It is real condition stopping only in extremely determinate part process use of warehouse back. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.275-285
• /
• 1995

In recent years there has been increasing interest in the issue of process centering in manufacturing process, The traditional process capability indices Cp, Cpk and Cpu are used to provide measure of process performance, but these indices do not represent the issue of process centering. A new measure of the process capability index Cpm is proposed that takes into account the proximity to the target value as well as the process variation when assessing process performance. However, Cpm only considers acceptance cost for deviation from target value within specification limits, do not includes economic consideration for rejected items. This paper proposes flexible process performance measures that considered quadratic loss function caused by quality deviation within specification limits, rejection cost associated with the disposition of rejected items, and inspection cost. In this model disposition of rejected items are considered under perfect corrective procedures and the absence of perfect corrective procedures.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.205-213
• /
• 2006

A cost-effective magnetic-coupled AC-PDP sustain driver with low switching loss is proposed. The transformer reduces current stress in the energy recovery switches which affects circuit cost and reliability. The turns-ratio can be used to adjust the sustain pulse slopes which affect gas discharge uniformity. Dividing the recovery paths prevents abrupt changes in the output capacitance and thereby switching losses of the recovery switches is reduced. In addition, the proposed circuit has a more simple structure because it does not use the recovery path diodes which also afford a large recovery current. By reducing the current stress and device count in the energy recovery circuit, the proposed driver may have decreased circuit cost and improved circuit reliability.

• 한국건축시공학회지
• /
• 제23권4호
• /
• pp.485-496
• /
• 2023

Precise construction cost estimation is paramount to determining the total construction expense of a project prior to the initiation of the construction phase. Despite this, manual quantification and cost estimation methods, which continue to be widely used, may result in imprecise estimation and subsequent financial loss. Given the fast-paced and efficiency-demanding nature of the construction industry, trustworthy quantity and cost estimation is essential. To mitigate these obstacles, this research is focused on establishing an automated quantity estimation algorithm, particularly designed for the main rebar of beams which are recognized for their complicated reinforcement configurations. The exact quantity derived from the proposed algorithm is compared to the manually approximated quantity, reflecting a variance of 10.27%. As a result, significant errors and impending financial loss can be averted. The implementation of the findings from this research holds the potential to significantly assist construction firms in quickly and accurately estimating rebar quantities while adhering strictly to applicable specifications and regulatory requirements.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권7호
• /
• pp.333-339
• /
• 2001

The transmission networks are not perfect conductors and a percentage of the power generated is therefore lost before it reaches the loads. This network loss effects to the cost of suppling power to consumers, and must be considered if the most efficient dispatch and location of generators and loads is to be achieved. In this paper, we propose an approximate calculation of marginal loss factors to analyze characteristics of transmission loss of KEPCO power system. These static marginal loss factors are approximately calculated based on the KEPCO's expected summer peak load data of year 2000.

• 산업경영시스템학회지
• /
• 제40권4호
• /
• pp.96-104
• /
• 2017

A one-shot system (device) refers to a system that is stored for a long period of time and is then disposed of after a single mission because it is accompanied by a chemical reaction or physical destruction when it operates, such as shells, munitions in a defense weapon system and automobile airbags. Because these systems are primarily related with safety and life, it is required to maintain a high level of storage reliability. Storage reliability is the probability that the system will operate at a particular point in time after storage. Since the stored one-shot system can be confirmed only through inspection, periodic inspection and maintenance should be performed to maintain a high level of storage reliability. Since the one-shot system is characterized by a large loss in the event of a failure, it is necessary to determine an appropriate inspection period to maintain the storage reliability above the reliability goal. In this study, we propose an optimal inspection policy that minimizes the total cost while exceeding the reliability goal that the storage reliability is set in advance for the one-shot system in which periodic inspections are performed. We assume that the failure time is the Weibull distribution. And the cost model is presented considering the existing storage reliability model by Martinez and Kim et al. The cost components to be included in the cost model are the cost of inspection $c_1$, the cost of loss per unit time between failure and detection $c_2$, the cost of minimum repair of the detected breakdown of units $c_3$, and the overhaul cost $c_4$ of $R_s{\leq}R_g$. And in this paper, we will determine the optimal inspection policy to find the inspection period and number of tests that minimize the expected cost per unit time from the finite lifetime to the overhaul. Compare them through numerical examples.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권15호
• /
• pp.6177-6180
• /
• 2014

Background: Our study objectives were to evaluate the medical economics of cervical cancer prevention and thereby contribute to cancer care policy decisions in Japan. Methods: Model creation: we created presence-absence models for prevention by designating human papillomavirus (HPV) vaccination for primary prevention of cervical cancer. Cost classification and cost estimates: we divided the costs of cancer care into seven categories (prevention, mass-screening, curative treatment, palliative care, indirect, non-medical, and psychosocial cost) and estimated costs for each model. Cost-benefit analyses: we performed cost-benefit analyses for Japan as a whole. Results: HPV vaccination was estimated to cost $291.5 million, cervical cancer screening $76.0 million and curative treatment $12.0 million. The loss due to death was $251.0 million and the net benefit was -$128.5 million (negative). Conclusion: Cervical cancer prevention was not found to be cost-effective in Japan. While few cost-benefit analyses have been reported in the field of cancer care, these would be essential for Japanese policy determination.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.81-86
• /
• 2003

최근 대형 전력시설물에 대한 VE 와 LCC 기법의 도입은 여러 가지 형태로 수행되고 있으며, 일반적으로 전력 시설물의 비용을 생각할 때 그 초기투자비만을 대상으로 평가하는 경향이 있으나, 시설물의 총 생애비용 (보전비, 수선비, 개선비, 운용비, 전력비등)을 동시에 고려하여야 한다. 본 연구에서는 간선설계에서 장거리 급전시 전압강하로 인한 동손비를 고려한 설계기법과 내구년한에 따른 총생애비용기법을 적용하여 타당성을 입증하였다.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.582-589
• /
• 2002

본 논문에서는 스위칭 소자인 beam lead 형태의 pin 다이오드대신에 저가인 증폭기용 HEMT를 스위칭소자로 하여 12 GHz 대역에서 동작하는 일정 삽입 손실의 5-비트 디지털 반사형 위상 변위기를 설계 및 제작한다. 기존의 이상적인 스위칭소자에 기초한 이론에 의해 설계할 때 필연적인 HEMT소자의 on, off시 큰 삽입손실차는 특정한 길이의 전송선로를 우선 스위칭 소자에 연결하여 HEMT소자의 on, off시 임피던스를 변환한 후 기존의 방식대로 설계하는 방법에 의해 제거할 쑤 있었다. 제작된 위상변위기는 설계 주파수인 12.2GHz - 12.7GHz 대역내 32단계의 스위칭 상태에서 삽입손실이 -4.5dB에서 -6dB 범위에 있으며 특히 전 단계에서 삽입 손실의 변화량이 1.5 dB 이내로 양호한 특성을 가져 본 논문에서 처음 시도한 임피던스 변환용 전송선에 의한 삽입 손실차 제거방법의 타당성을 확인할 수 있었다.