• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.166-172
• /
• 2003

The dynamics of the DDWMR depends on the velocity difference of the two driving wheels. And which is known as a type of non-holonomic equation. By this reason, the treatment of DDWMR had become difficult and conservative. In this paper, the differential-driving wheeled mobile robot is considered. The Takaki-Surgeno fuzzy model and a control method for DDWMR is presented. The suggested controller has three control elements. The first element is fuzzy state feedback designed for eliminating the dependence of time-varying parameter. The second element is weighting controller which is designed for good frequency response. The third controller is PI-controller which is designed for good command following and robustness with un-modeled dynamics. In order for achieving the performance objective, the design of controller is based on the loop-shaping algorithm.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.689-692
• /
• 1998

In this research a fault-tolerant and bumpless switching control is proposed for boiler systems used in the power plants. Firstly, three operating points are selected to control the nonlinear boiler through the full operational range, and the $H_{\infty}$ loop shaping controller and the model-based predictive controller(MBPC) are designed. To prevent the windup and bump problems which are caused by the actuator saturation and the controller switching, an anti-windup and bump less transfer technique is adopted to the $H_{\infty}$ loop shaping controller. Also the constrained gain-scheduling technique is applied to MBPC to achieve the same objective. Secondly, the fault-tolerant control technique is proposed to continue the control action without stopping the boiler operation even in case of some faults. Through various simulation studies, the performances of the proposed control techniques are demonstrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1370-1377
• /
• 2004

Optimal control gain for time-delay systems is made by an optimal control gain for delay-free systems multiplied by a state transition function for the delay time. The optimal control gain for delay-free systems is obtained by pushing two zeros of the PID controller closely to a larger pole of the second order plant. Thus the optimal tuning of PID controller for time-delay second order system is able to be obtained by calculation for the state transition function.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.50 no.4
• /
• pp.197-207
• /
• 2001

In this paper, design problem of QFT-PSS using Genetic Algorithm(GA) is investigated for power systems with parameter variation and disturbance uncertainties. A robust controller for uncertain power systems can be designed automatically such that the cost of feedback is minimized and all robust stability and performance specifications are satisfied. It is shown that the proposed design method not only automates loop shaping but also improves design quality and improves the quality with a reduced order controller. The robustness of the proposed controller has been investigated on a single machine infinite bus model. The results are shown that the proposed QFT-PSS using GA is more robust tan conventional PSS.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.369-372
• /
• 1998

In this research a fault-tolerant and bumpless switching control is proposed for boiler systems used in the power plants. Firstly, three operating points are selected to control the nonlinear boiler through the full operational range, and the $H_{\infty}$ loop shaping controller and the model-based predictive controller(MBPC) are designed. To prevent the windup and bump problems which are caused by the actuator saturation and the controller switching, an anti-windup and bumpless transfer technique is adopted to the $H_{\infty}$ loop shaping controller. Also the constrained gain-scheduling technique is applied to MBPC to achieve the same objective. Secondly, the fault-tolerant control technique is proposed to continue the control action without stopping the boiler operation even in case of some faults. Through various simulation studies, the performances of the proposed control techniques are demonstrated.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.7
• /
• pp.637-643
• /
• 2010

The paper is about the development of 6-DOF active vibration isolation systems using VCM. Firstly, formulate the vertical 3-DOF mathematical model under eccentric load, and compare the model with the case in which the center of mass is located at the centroid. And then, complete the 6-DOF mathematical model by formulating the horizontal 3-DOF mathematical model. Find main parameters by comparing the result of the frequency response test with simulation result on the model. Finally, achieve the performance of vibration isolation by applying loop shaping approach & feedforward controller.

• 전기의세계
• /
• v.64 no.12
• /
• pp.10-19
• /
• 2015

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.429-438
• /
• 2004

In this paper, a decision-feedback coherent code tracking loop is designed for WCDMA systems and its performance is analyzed in terms of jitter variance considering the effect of phase and symbol estimation errors for both AWGN and fading environments. An analytical closed-form formula for jitter variance is Int derived for AWGN environments as a function of a pulse-shaping filter, timing offset, signal-to-interference ratio, and loop bandwidth while involving the phase estimation error and bit error rate, and the upper bound of jitter variance is derived for fading environments. Finally a second-order coherent code tracking loop is designed with the DPCH frame format #13 of the WCDHA forward link selected as a target system, and its performance is evaluated by the closed-form formula and compared with the simulation results for both AWGN and Rayleigh fading environments.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.11
• /
• pp.102-109
• /
• 1997

A two-degree-of freedom (TDF) $H_{\infty}$controller for a seeker scan loop is presented for the purpose of improving scanning performances. The perturbed plant model is characterized via the normalized coprime factorization. The TDF $H_{\infty}$controller is designed based on the loop shaping design procedure and model matching approach, and its performances are evaluated and compared with those of a previous work. It is demonstrated that the proposed TDF $H_{\infty}$controller is more effective to the control of the seeker scan loop than the previous controller.oller.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.157-165
• /
• 1995

The new formulation of designing the two degree of freedom(TDF) robust controller is proposed using $H_{\infty}$optimization and model matching method. In this formulation the feedback controller and feedforward controller are designed in a single step using $H_{\infty}$optimization procedure. Roughly speaking, the feedback controller is designed to meet robust stability and disturbance rejection specifications, while the feedforward controller is used to improve the robust model matching properties of the closed loop system. The proposed formulation will be illustrated and evaluated on a seeker scan-loop. And the performances of TDF robust controller are compared with those of the $H_{\infty}$ controller designed using Loop Shaping Design Procedure proposed by McFarlane and Glover.lover.