• 한국통신학회논문지
• /
• 제32권7A호
• /
• pp.686-693
• /
• 2007

와이브로 상향링크의 경우 개방형 전력제어에서는 피드백 없이 전력 할당을 하기 때문에 피드백에 사용될 무선자원을 절약 할 수는 있지만 단말에 정확한 전력 할당을 하기 어렵다. 이에 본 논문은 잡음간섭 값을 현재 무선 환경에 적응하는 방법을 제시하여 순시적으로 변화하는 무선 환경에 적합하게 하고 전력 할당의 상/하향 계단값 결정 방법을 대칭형과 비대칭형으로 제안하여 비교 실험하였다. 컴퓨터를 이용한 실험을 통해서 시스템 파라미터에 따라 상/하향 계단값을 다르게 적용할 때 높은 섹터 처리율과 낮은 오류율 결과를 얻을 수 있다는 것을 알 수 있다.

• Journal of Welding and Joining
• /
• 제24권4호
• /
• pp.32-38
• /
• 2006

The objective of present research works is to investigate the effects of process parameters, including the power of laser, cutting speed, material thickness, and the edge angle, on the melted area in the sharp edge of the cut material fur the case of cutting of a low carbon steel sheet using high-power CW Nd:YAG laser. In order to investigate the influence of edge angle and size of loop on the melted area in the sharp edge, angular cutting tests and loop cutting tests have been carried out. From the results of angular cutting tests, the relationship between the edge angle and the melted area has been obtained. The results of the experiments have been shown that the melted area is rapidly reduced from $120^{\circ}$ of the edge angle and the melted area is nearly zero at $150^{\circ}$ of the edge angle. Through the results of loop cutting experiments, the relationship between the cutting angle on the melted area in the edge according to the size of loop have been obtained. In addition, it has been shown that a proper size of loop is nearly 3 mm as the corner angle is greater than $90^{\circ}$ and 5 mm as the comer angle is less than $90^{\circ}$. The results of above experiments will be reflected on the knowledge base to generate optimal cutting path of the laser.

• Imaging Science in Dentistry
• /
• 제39권2호
• /
• pp.81-87
• /
• 2009

Purpose: To evaluate the anteroposterior length and buccal angle of the anterior loop, and the size and location of the mental foramen using cone beam computed tomography (CBCT). Materials and Methods: 100 CBCT images from 87 adults (43 males and 44 females) ranging in age from 20 to 73 years (average 50 years) with edentulous ridge of the mandibular premolar region were obtained. Axial, sagittal, coronal images were reconstructed from Dental and Block Images of CBCT. The anteroposterior length, shape and buccal angle of the anterior loop, and the size and location of the mental foramen were calculated from reconstructed images of axial, sagittal and coronal CBCT. Results: The anteroposterior length and buccal angle of the mental canal was 4.0${\pm}$1.2mm, 37.8${\pm}$11.60$^{\circ}$respectively. The loop type with straight course was the most common shape of the mental canal. The location of the mental foramen below the apex of the lower second premolar (78%) was the most common. The maximum size of the mental foramen was 4.6${\pm}$1.0 mm in width and 3.0${\pm}$0.6 mm in height. The inner size of the mental canal was 2.6${\pm}$0.6 mm in width and 2.1 mm${\pm}$0.4 mm in height. Conclusion: CBCT is useful to evaluate the anterior loop and mental foramen of the mandibular canal. Safe guideline of 4 mm from the most anterior point of the mental foramen is recommended for implant and surgical treatment. (Korean J Oral Maxillofac Radiol 2009; 39: 81-7)

• 한국전자파학회논문지
• /
• 제17권9호
• /
• pp.821-828
• /
• 2006

본 논문에서는 시험용 휴대폰의 내부에 위치한 루프 형태 접지판의 위치와 크기 변화에 따른 SAR(Specific Absorption Rate) 값의 변화를 검토하였다. 휴대폰의 rear case 안에 있는 루프 형태 접지판에 따른 SAR 값에 대한 전산 모의 실험을 수행하였으며 그 결과 루프 형태 접지판의 위치와 크기에 따라 SAR 값이 달라짐을 보였다. 검토된 루프 형태 접지판의 위치와 크기들 중 small size case-C의 경우가 8.70 %의 감소 효율을 보여 가장 좋은 성능을 보였다. 그리고 이 경우에 루프 형태 접지판에 가장 높은 유도 전계 분포를 보였다. 전산 모의 실험시 폴딩 각도는 $160^{\circ}$로 하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.121-124
• /
• 2000

In IMT-2000 systems, the outer loop dynamically adjusts the target SIR so that adequate performance in terms of the frame error rate(FER) and the true quality measure is achieved. This paper utilizes an analytic model lot outer loop power control(OLPC) adjusting the target SIR in IMT-2000. The analytic model is based on the discrete-time Markov chain as voice traffic SIR. It is described that the model can be used to find the optimum step size in voice traffic for fast fading environments. The optimum step size influences the performance of OLPC： As the step size decreases, the average target SIR increases and average FER decreases.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.89-93
• /
• 1994

Mg-페라이트에 있어서 B-H hysteresis loop 특성에 미치는 소결체의 밀도, 내부 응력, 입자 크기의 영향을 조사하였다. 밀도가 증가함에 따라서 보자력은 감소하였으며 각형비는 증가 하였다. 보자력은 내부 응력에 매우 의존적이었으며 시편 내부에 응력이 존재할때 보자력은 1.95 [Oe]에서 4.35[Oe]로 증가하였다. 그러나 각형비는 큰 차이가 없었다. 입자 크기가 6-11[um] 범위 내에서의 보자력 및 각형비는 입자 크기에 의존성을 갖지 않았다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.697-699
• /
• 2017

본 논문에서는 D 플립플롭과 보조 전하펌프를 사용하여 작은 크기의 위상고정루프를 제안하였다. 단일 커패시터를 사용하여 크기가 작기 때문에 위상고정루프의 집적화가 가능하다. 제안된 위상고정루프는 HSPICE로 시뮬레이션 하였으며, 1.8V $0.18{\mu}m$ CMOS 공정을 사용하였다.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.471-481
• /
• 1995

Measurement factors for the dielectric properties of low dielectric loss materials (tan${\dalta}{\le}10^{-4}$) were investigated using the dielectric rod resonator method. It was shown that the relative conductivity (${\sigma}_{r}$) should be controlled within a 5% to obtain the standard deviations of less than 0.07 for permittivity .epsilon.r and 0.06${\times}10^{-4}$ for tan.delta.respectively. Surface resistivity (R$_s$) could be reduced when the surface roughness of parallelled conducting plate was less than 0.07 .mu.m. Measurement error for the permittivity was $\pm$0.02% independent of probe loop size, whereas the error in Q value was reduced with the decrease in probe loop size and also with the increase in the absolute values of Q. Reliable Q values were determined with the probe loop size of less than 4mm. The accurate for the distance between the measuring probe loop and the sample could be obtained when the insertion loss of resonant frequency ranged -15dB - -30dB.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.22-28
• /
• 2016

Multi-loop control of a boost converter needs a current-sensing circuit to detect the inductor current. Current sensorless multi-loop control reduces the cost, size and weight of the converter. The Luenberger observer (LO) is widely used to estimate the inductor current for current sensorless control of a switching converter. However, the design of the LO-based sensorless multi-loop control has not been well presented, so far. In this paper, a closed-loop characteristics evaluation method is proposed to design an LO-based current sensorless multi-loop control for boost converters. Simulations show evaluations of the closed-loop characteristics. Practical experiments on a digital processor confirm the simulations.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.93-99
• /
• 2002

The Cartesian loop chip which is one of key devices in narrow-band Walky-Talky transmitter using RZ-SSB modulation method was designed and implemented with 0.35 Um CMOS technology. The reduced size and low cost of transmitter were available by the use of direct-conversion and Cartesian loop chip, which improved the power efficiency and linearity of transmitting path. In addition, low power operation was possible through CMOS technology. The performance test results of transmitter showed -23 dBc improvement of IMD level and -30 dEc below suppression of SSB characteristic in the operation of Cartesian loop chip (closed-loop). At that time, the transmitting power was about 37 dBm (5 W). The main parameters to improve the transmitting characteristic and to compensate the distortion in feed back loop such as DC-offset, loop gain and phase value are interfaced with notebook PC to be controlled with S/W.