• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권2호
• /
• pp.166-172
• /
• 2003

The dynamics of the DDWMR depends on the velocity difference of the two driving wheels. And which is known as a type of non-holonomic equation. By this reason, the treatment of DDWMR had become difficult and conservative. In this paper, the differential-driving wheeled mobile robot is considered. The Takaki-Surgeno fuzzy model and a control method for DDWMR is presented. The suggested controller has three control elements. The first element is fuzzy state feedback designed for eliminating the dependence of time-varying parameter. The second element is weighting controller which is designed for good frequency response. The third controller is PI-controller which is designed for good command following and robustness with un-modeled dynamics. In order for achieving the performance objective, the design of controller is based on the loop-shaping algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.689-692
• /
• 1998

In this research a fault-tolerant and bumpless switching control is proposed for boiler systems used in the power plants. Firstly, three operating points are selected to control the nonlinear boiler through the full operational range, and the $H_{\infty}$ loop shaping controller and the model-based predictive controller(MBPC) are designed. To prevent the windup and bump problems which are caused by the actuator saturation and the controller switching, an anti-windup and bump less transfer technique is adopted to the $H_{\infty}$ loop shaping controller. Also the constrained gain-scheduling technique is applied to MBPC to achieve the same objective. Secondly, the fault-tolerant control technique is proposed to continue the control action without stopping the boiler operation even in case of some faults. Through various simulation studies, the performances of the proposed control techniques are demonstrated.

• 한국통신학회논문지
• /
• 제29권10C호
• /
• pp.1370-1377
• /
• 2004

시간 지연이 있는 시스템에서의 최적 제어 이득은 시간 지연이 없는 시스템에서 설계된 최적 제어 이득과 지연 시간에 대하여 계산된 상태천이 함수의 곱의 형태로 나타난다. 따라서 시간 지연이 없는 시스템에 대하여 PID제어기의 영점들을 플랜트의 최대 극점에 근접하도록 가중치 요소 Q와 R을 선택하여 최적 제어 이득을 구하고, 시간 지연이 있는 2차 시스템에서의 상태천이 함수를 계산하여 시간 지연이 있는 시스템에서의 강인한 최적 PID 제어기 설계가 가능하도록 하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제50권4호
• /
• pp.197-207
• /
• 2001

In this paper, design problem of QFT-PSS using Genetic Algorithm(GA) is investigated for power systems with parameter variation and disturbance uncertainties. A robust controller for uncertain power systems can be designed automatically such that the cost of feedback is minimized and all robust stability and performance specifications are satisfied. It is shown that the proposed design method not only automates loop shaping but also improves design quality and improves the quality with a reduced order controller. The robustness of the proposed controller has been investigated on a single machine infinite bus model. The results are shown that the proposed QFT-PSS using GA is more robust tan conventional PSS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.369-372
• /
• 1998

In this research a fault-tolerant and bumpless switching control is proposed for boiler systems used in the power plants. Firstly, three operating points are selected to control the nonlinear boiler through the full operational range, and the $H_{\infty}$ loop shaping controller and the model-based predictive controller(MBPC) are designed. To prevent the windup and bump problems which are caused by the actuator saturation and the controller switching, an anti-windup and bumpless transfer technique is adopted to the $H_{\infty}$ loop shaping controller. Also the constrained gain-scheduling technique is applied to MBPC to achieve the same objective. Secondly, the fault-tolerant control technique is proposed to continue the control action without stopping the boiler operation even in case of some faults. Through various simulation studies, the performances of the proposed control techniques are demonstrated.

• 한국소음진동공학회논문집
• /
• 제20권7호
• /
• pp.637-643
• /
• 2010

The paper is about the development of 6-DOF active vibration isolation systems using VCM. Firstly, formulate the vertical 3-DOF mathematical model under eccentric load, and compare the model with the case in which the center of mass is located at the centroid. And then, complete the 6-DOF mathematical model by formulating the horizontal 3-DOF mathematical model. Find main parameters by comparing the result of the frequency response test with simulation result on the model. Finally, achieve the performance of vibration isolation by applying loop shaping approach & feedforward controller.

• 전기의세계
• /
• 제64권12호
• /
• pp.10-19
• /
• 2015

• 한국통신학회논문지
• /
• 제29권4A호
• /
• pp.429-438
• /
• 2004

본 논문에서는 WCDMA 시스템을 위한 판정궤환 동기식 동기추적 회로 (decision-feedback coherent code tracking loop)를 설계하고 AWGN 환경과 페이딩 환경에서 위상 에러와 심볼 에러의 영향을 고려하여 지터 분산을 해석한다. 먼저, AWGN 환경에서의 지터 분산을 위상 에러와 비트 오율을 포함하여 펄스성형 필터(pulse-shaping filter), 타이밍 오프셋 (timing offset), 신호 대 잡음비 (signal-to-interferences ratio), 루우프 대역폭(loop-bandwidth)에 대한 일반식으로 유도하고 페이딩 환경에서 지터 분산의 상한치 (upper bonnd)를 유도한다. 끝으로, WCDMA 순방향 링크의 DPCH 프레임 포맷 #13을 목표 시스템(target system)으로 설정하여 2차 동기식 등기추적 회로를 설계하고 AWGN 환경과 Rayleigh 페이딩 환경에서 지터 분산의 이론치와 시뮬레이션 결과를 비교, 분석한다.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.102-109
• /
• 1997

A two-degree-of freedom (TDF) $H_{\infty}$controller for a seeker scan loop is presented for the purpose of improving scanning performances. The perturbed plant model is characterized via the normalized coprime factorization. The TDF $H_{\infty}$controller is designed based on the loop shaping design procedure and model matching approach, and its performances are evaluated and compared with those of a previous work. It is demonstrated that the proposed TDF $H_{\infty}$controller is more effective to the control of the seeker scan loop than the previous controller.oller.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.157-165
• /
• 1995

The new formulation of designing the two degree of freedom(TDF) robust controller is proposed using $H_{\infty}$optimization and model matching method. In this formulation the feedback controller and feedforward controller are designed in a single step using $H_{\infty}$optimization procedure. Roughly speaking, the feedback controller is designed to meet robust stability and disturbance rejection specifications, while the feedforward controller is used to improve the robust model matching properties of the closed loop system. The proposed formulation will be illustrated and evaluated on a seeker scan-loop. And the performances of TDF robust controller are compared with those of the $H_{\infty}$ controller designed using Loop Shaping Design Procedure proposed by McFarlane and Glover.lover.