• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.7-12
• /
• 2005

Scattered look-ahead(SLA) pipelining method can be efficiently used for high-speed or low-power applications of digital II R filters. Although the pipelined filters are guaranteed to be stable by this method, these filters suffer from large roundoff noise when the poles are crowded within some critical regions. An angle and radius constrained II R fille. design approach using modified Remez exchange algorithm and least squares algorithm is proposed to avoid tight pole-crowding in pipelined filters, resulting in improved frequency responses and reduced coefficient sensitivities. Experimental results demonstrate that our proposed method leads to chip area reduction by $33{\%}$ and low power by $45{\%}$ against the conventional method.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.582-585
• /
• 2004

Oyster fanning structures in tidal flats are well detected by SAR system. Each frame of these artificial structures is composed of two vertical and one horizontal wooden pole. We investigate characteristics of polarimetric features in the target structures. In this paper, the results of AIRSAR L-band POLSAR data and experiments in laboratory are discussed. The ratio of single bounce to double bounce scattering depends of vertical pole height, direction of horizontal pole to radar look direction, and incidence angle as well as sea surface condition. We have conducted laboratory experiments. According to target scale, Ku-band and targets downsized by scale of 10 are used. The results of the experiments are summarized as: i) total power of the backscattering is more affected by vertical poles than a horizontal pole; ii) and backscattering from a horizontal pole is sensitive to the relative radar look direction to target array. We conclude that water level can be effectively measured by using interferometric phase and backscattering intensity if vertical poles in the water are observed by L-band HH- or VV-polarization. Measurement of tide height can be further improved if double bounced components are separated from fully polarized SAR data.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.7 no.1
• /
• pp.77-84
• /
• 2005

The purpose of this study is to know on the changes characteristics of eye brow forms of the wester women. A facial image which people recognize contents on changes of image according to various eye brow changes on the face. Various changes of image were seen by length, angle and thickness of eye brow types. The ancient Egyptians used antimony powder to blacken their brows huge black lines. In medieval times, women shaved both their eye brows and their hairlines to give a pure look. The early nineteenth century, brows were untweezed and natural. In the 1920s, when women started paying attention to their faces and their freedom, brows were tweezed, narrowed. In the 1930s, the idealized faces of Jean Harlow, Marlene Dietrich and Greta Garbo - narrow tracery of drawn on brows. The eyebrows is filled various shape of the 1950s. In the 1970s, the Disco Decade of Dreadful tastes, women were at their tweezers again, manicuring their brows. Brooke Shields's natural-looking brow would be an example of the 1980s. In the 1990s, the eyebrow designed by superstar makeup artists who determined the look of fashion model and screen star.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.9
• /
• pp.909-915
• /
• 2009

This work is to develop a vision system for high precision alignment between upper and lower plates required at the imprinting process of the large LCD flat panel. We compose a gantry-stage that has highly repeated accuracy for high precision alignment and achieves analysis about thermal transformations of stage itself. Position error in the stage is corrected by feedback control from the analysis. This system can confirm alignment mark of upper and lower plates by using two cameras at a time for the alignment of two plates. Pattern matching that uses geometric feature is proposed to consider the recognition problem for alignment mark of two plates. It is algorithm to correct central point and angle for the alignment from the recognized mark of upper and lower plates based on the special characteristics. At the alignment process, revision for error position is performed through Look and Move techniques.

• Journal of Power Electronics
• /
• v.2 no.2
• /
• pp.146-153
• /
• 2002

this paper presents an implementation of digital control system of speed sensorless for Reluctance Synchronous Motor (RSM) drives with direct torque control (DTC). The problem of DTC for high-dynamic performance RSM drive is generating a nonlinear torque due to a saturated nonlinear inductance curve with various load currents. The control system consists of stator flux observer, compensating inductance look-up table, rotor position/speed/torque estimator, two hysteresis band controllers, an optimal switching look-up table, IGBT voltage source unverter, and TMS320C31 DSP controller. The stator flux observer is based on the combined voltage and current model with stator flux feedback adapitve control that inputs are the compensated inductances, current and voltage sensing of motor terminal with estimated rotor angle for wide speed range. The rotor position is estimated rotor speed is determined by differentiation of the rotor position used only in the current model part of the flux observer for a low speed operation area. It does not requrie the knowledge of any montor paramenters, nor particular care for moter starting, In order to prove the suggested control algorithm, we have simulation and testing at actual experimental system. The developed sensorless control system is showing a good speed control response characterisitic result and high performance features in 20/1500 rpm with 1.0Kw RSM having 2.57 ratio of d/q reluctance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.31-33
• /
• 2021

In this paper, a dataset was designed and built to improve the accuracy of finger direction detection using an object detection algorithm based on You Only Look Once (YOLO). In order to improve the object detection performance, about 200 finger image data sets were trained, and to confirm that the detection accuracy differs from each other according to the angle of the palm, 50 comparison groups of different angles were configured and tested. As a result of the experiment, it was confirmed that the detection accuracy of palm located in a direction close to 90° is higher than that of other angles.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.11 no.3
• /
• pp.125-134
• /
• 2009

The purpose of this study is to analyze the formative characteristics of power-shoulder jacket shown in 08/09 F/W and 09/10 F/W London, Paris, Milan, New York collection and extract main expression words for development of semantic differential scales of visual image according to the change in shoulder angle and width of power-shoulder jacket. The result of this study is as follows. Power-shoulder jacket which were worn by 1980 business women have similar cutting with men's suit jacket, but have characteristics of exaggerating the body figure as exaggerated shoulder with pad and tight waist like an inverted triangle silhouette. Power-shoulder jackets shown in collections used glossy and glittering material and dark colors and formed slim silhouette with matches of shoulder line of temperate senses and casual wear. Like this, the power-shoulder jacket was expanded to daily casual wear from traditional formal wear. Main expression words of visual image of jackets according to the changes in angle and width of shoulder differ greatly depending on the expansion degree of angle and width of shoulder. Changes in shoulder angle may look tense, stiff and too much according to the amount of changes. However, it also has the image of sharp but dignified and charismatic. Also, it helps to show body figure more efficiently like being slim and looking taller. Related to the current trend emphasizing shoulder among women, it is evaluated to be stylish and trendy. When the expansion degree is not too much, changes in shoulder width partly show slim and slender waist under the influence of wider shoulder with basic tailored jacket image. However, when the expansion degree is enlarged, image related to the body figure is more definite compared to other visual images.

• The Research Journal of the Costume Culture
• /
• v.14 no.4
• /
• pp.609-624
• /
• 2006

The purpose of this study is to give the guideline to the pattern designing by supplying various images of the transformed shape of tailored collar with the location and angle of gorge line and laying measurement of the tailored collar while designing the tailored collar. The results of this study are as follows : Images of the sample at the case of 1cm of laying measurement looks 'urban', 'light', 'sharp', 'young', 'fashionable' and 'narrow' than that at the case of 7cm. When the laying measurement increases, the image of the sample looks more 'classical' and 'boorish'. The image of the sample 'light', 'sensuous' and 'young' at the case of sample of which laying measurements of the collar was 3cm. Second, at the case of sample whose laying measurements of the collar was 5cm, it was shown that the low location of gorge line made the image of the sample 'soft' and 'short'. On the other hand the image of the sample looked 'hard', 'keen' and 'long' by the high location of gorge line. Third, at the case of sample of which laying measurements of the collar was 7cm, low location of gorge line made the image of the sample look short. However, normal location of gorge line made the image of the sample looked 'fashionable'. The images of the samples of which laying measurements of the collar were 3cm, 5cm and 7cm, respectively, had changed with the angle of gorge line. First, the high angle of gorge line made the image of the sample 'rigid' and 'keen' at the case of sample of which laying measurements of the collar was 3cm. The high angle of gorge line made the image of the sample looked 'boorish' and 'singular'.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.742-751
• /
• 2018

In this paper, we propose a time varying biased proportional navigation guidance law that controls the impact angle under Field-of-View(FOV) and the acceleration limit of the missile. The proposed law is composed of three stages in consideration of the FOV limitation. Since the bias directly affects the acceleration at each stage, the final bias value of the previous stage becomes the initial bias value of the next stage when the stage is switched. In addition, the impact angles were controlled by judging whether impact angles were reached in consideration of engagement conditions and physical constraints.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.93-102
• /
• 2019

The nation's fraternity and elite players who have built up a global bicycle infrastructure often find it to be a problem with the bicycle's speed and speed reduction, pain in knees and hip joints, or even with the bike itself, or with the bike's own physical defects or a riding posture. However, we found that most cases of cleat adjustment errors were likely to be true. Accurate adjustment of the cleats is the most important of the entire fitting process and can be the basis for improving the ability of the bicycle rider and preventing injury. Therefore, the study was intended to give a prior study of bicycle fitting, which can improve bicycle efficiency and prevent injury when riding bicycle, and specific ways of adjusting bicycle shoe cleats, and the following results were obtained. First, the cleat characteristics of Shimano, LOOK and Speedplay, which are currently used in public, and the characteristics during the cleat adjustment process, were derived. In addition, the structure and characteristics of dedicated shoes using cleats and the method of using pedalling by the structure of shoes after adjusting the cleats were derived. Second, the position of the shoe and its relationship with torque in pedalling was discussed, and the method of adjusting front and back of cleats was derived. Third, leg length, ASIS, Q-Angle and Q-factor etc. were analyzed and the method of setting and adjusting cleat left and right values were derived. Fourth, the relationship between walking angle and cleat rotation was analyzed, the method was derived, and the torque size and angle behind the cleat adjustment were compared and analyzed using the spinner to indicate the torque and the effective mean torque angle after the cleat adjustment.