• The Korean Journal of Pharmacology
• /
• v.15 no.1_2 s.25
• /
• pp.29-37
• /
• 1979

The tension-length relationships and reactivity of vascular smooth muscle in longitudinal strips from portal vein ana in helical strips from thoracic aorta and pulmonary artery of normotensive control and cadmium-hypertensive rabbits were studied in vitro. 1. The mean arterial pressures of non-poisoned control rabbits was $87.0{\pm}4.7 mmHg$. However, Cd-poisoned group revealed the significant increase in pressure by $109.04{\pm}2.8 mmHg$ (p<0.005). 2. By tension-length studies, strips from portal vein of Cd-poisoned group stretched a greater percent increase in length in response to an applied resting force from 0.25 to 5 g than did those from non-poisoned group. On the contrary, strips from thoracic aorta of Cd-poisoned group showed less compliant than those from control, i.e. the former underwent a less percent increase in length than the latter. Passive tension-length relations of pulmonary artery was unaffected by Cd-hypertension. 3. The force of contraction(active tension) was significantly lowered in strips from aorta of Cd-hypertensive group throughout the range of $0.5{\sim}2g$ passive tension. However, there was no significant difference in the development of active tension of portal vein or pulmonary artery of both groups. 4. The $K^+$-contraction in the portal vein, aorta and pulmonary artery of Cd-poisoned group made no difference in the active force from those of control group. 5. The force of contraction in the strips from aorta of Cd-poisoned group was significanty decreased compared to that of control. The results suggested that the alterations in vascular reactivity to contracting substances and in distensibility to passive tension were induced in the Cd-hypertensive rabbits.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2000.10a
• /
• pp.184-191
• /
• 2000

In this research, a numerical model is developed for analysis of buried pipelines considering longitudinal permanent ground deformation(PGD) due to liquefaction induced lateral spreading. Buried pipelines and surrounding soil are medeled as continuous pipelines using the beam elements and a series of elasto-plastic springs uniformly distributed along the pipelines, respectively. Idealized various PGD patte군 based on the observation of PGD are used as a loading configuration and the length of the lateral spread zone is considered as a loading parameter. Numerical results are verified with other research results and efficient applicability of developed procedure is shown. Analyses are performed by varying different parameters such as PGD pattern, pipe diameter and pipe thickness. Results show that response of buried pipelines are more affected by pipe thickness than pipe diameter. Finally, the critical length of the lateral spread zone and the critical magnitude of PGD which cause yielding, local buckling or tension failure are proposed for the steel pipe which are normally used in Korea.

• Structural Engineering and Mechanics
• /
• v.23 no.4
• /
• pp.369-386
• /
• 2006

The influence of reinforcement buckling on the flexural response of reinforced concrete members is studied. The stress-strain response of compression reinforcement is determined computationally using a large-strain finite element model for bars of varied diameter, length, and initial eccentricity, and a mathematical expression is fitted to the simulation results. This relationship is used to represent the response of bars in compression in a moment-curvature analysis of a reinforced concrete cross section. The compression bar may carry more or less force than a tension bar at a corresponding strain, depending on the relative influence of Poisson effects and bar slenderness. Several cross-section analyses indicate that, for the distances between stirrups prescribed in modern concrete codes, the influence of inelastic buckling of the longitudinal reinforcement on the monotonic moment capacity is very small and can be neglected in many circumstances.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.629-634
• /
• 2000

In this study, 9 reinforced concrete(RC) continuous beams were tested to investigate the arch action. By measuring longitudinal steel strains during the whole loading stages up to failure, the development of arch action is evaluated. Variables included are span length, longitudinal steel ratio and the presence of stirrups. As a result, it was known that measured steel tension in the span is substantially higher than the conventionally calculated values, and it was appeared that near the middle of the shear span the measured values exceeded the calculated values by factors of up to 1.4 or more.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.159-167
• /
• 2003

In this paper, a two-dimensional multibody DADS model of a moving walk is developed to improve the ride quality of a moving walk system. The proposed DADS model is able to estimate the longitudinal acceleration of moving walk system, which is the more sensitive and important than other accelerations. To show the validity of the developed model, the longitudinal accelerations of pallet obtained from the computer simulations are compared to the experimental data in frequency domain. Then, the factorial design technique is applied to determine the main design factor and to improve the ride quality. The change of the spring compression in the lower part of the tension generating system improved the ride quality of the moving walk system.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.3
• /
• pp.215-220
• /
• 2006

Recently, steel-concrete composite slab decks have been widely used as highway bridge decks. In the construction of the composite slab decks, it is necessary to join two adjacent blocked bottom plates to form one unite in the longitudinal direction. In this paper, several types of longitudinal direction joints for Robinson type composite slab decks ared proposed herein and static bending test are carried out by using slab specimens. And the stress and deformation of the tensile grip connection with high strength bolts are discussed by using three-dimensional elastic-plastic FEM.

• Structural Engineering and Mechanics
• /
• v.84 no.2
• /
• pp.253-268
• /
• 2022

Using non-destructive Acoustic Emission (AE) and optical Digital Image Correlation (DIC) methods, the moment-curvature behavior of steel and GFRP bars reinforced concrete beams under flexure was explored in this study. In the tension zone, laboratory studies were carried out on steel-RC and GFRP-RC beams with varying percentages of longitudinal reinforcement ratios of 0.33 %, 0.52%, and 1.11%. The distinct mechanism of cracking initiation and fracture progression of failure in steel-RC and GFRP-RC beams were effectively correlated and picked up using AE waveform characteristics of the number of AE hits and their amplitudes, AE energy as well as average frequency and duration. AE XY event plots and longitudinal strain profiles using DIC gives an online and real-time visual display of progressive AE activity and strains respectively to efficaciously depict the crack evolution and their advancement in steel-RC and GFRP-RC beams. They display a close matching with the micro and macro-cracks visually observed in the actual beams at various stages of loading.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1995.10a
• /
• pp.69-75
• /
• 1995

The deformation behavior of stainless steel-clad aluminum sheet metals under uniaxial tension has been investigated. The differences in mechanical properties such as elastic modulus, flow stress and plastic strain ratio, of component layers of the composite sheet gave rise to warping of the tensile specimens. The warping has been analyzed by FEM and the total force and momentum equilibria. The analyzed radii of curvature of the warped specimens were smaller than the measured data possibly due to elastic recovery during unloading. The differences in mechanical properties may also give rise to transverse stresses in the component layers. The transverse stresses have been analyzed on the assumption of isostrain and by the FEM in which the warping has been taken into account. The transverse stresses calculated by the FEM were lower than those by the isostrain hypothesis due to stress relaxation by the warping and turned out to be negligible compared with the longitudinal stresses. Consequently, the flow stresses of the composite sheets follow the rule of mixtures.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.131-134
• /
• 2005

Until recently tensile stresses in concrete have not been considered, since it does not affect the ultimate strength of reinforced concrete flexural members significantly. However, to verify the load-deflection relationship, the effect of tensile stresses between reinforcing bars and concrete, so-called tension stiffening effect must be taken into account. Main parameters of the tension stiffening behavior are known as concrete strength, and bond between concrete and reinforcing bars. In this study a total of twenty specimen subject to bending was tested with different concrete strength, coverage, and de-bonding length of longitudinal bars. The effects of these parameters on the flexural rigidity, crack initiation and propagation were carefully checked and analyzed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.77-80
• /
• 2006

Longitudinal reinforcements of the plastic hinge region were behaved tensile deformation and compressional deformation by direction of lateral loading. However Confinement steels were behaved only tensile deformation by lateral loading. Transverse steels were laid the state of tension in the lateral loading of time, and they were laid state that stress is zero when it was removed lateral load. Nine specimens were tested under cyclic stresses(tension and zero). The purpose of this research is to investigate the strain behavior and capacity of energy for confinement steel. The selected test variables are $L/d_b(L/d_b=6)$, size of reinforcement and specified yielding strength(300, 400, 500 MPa).