• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.169-178
• /
• 2008

압축플랜지의 설계는 단순히 종방향 보강재와 횡방향 보강재로 둘러싸인 서브패널(sub-panel)의 극한거동에 대해 적절한 안전율을 도입하여 이루어져 왔다. 그러나, 종방향 보강재의 수와 강성, 횡방향 보강재의 간격, 초기 변형량과 잔류응력의 분포 등 제 영향을 고려해서 압축플랜지 전체의 극한강도를 결정하는 것이 합리적이다. 본 연구에서는 Folded Plate 이론에 근거하여 압축플랜지에 대해 기하강성의 영향, 재료적 비선형성을 고려한 해석 프로그램을 개발하고 이를 바탕으로 국내에서 실제 시공된 강박스거더교의 압축플랜지에 적용하였다.

• 한국해양공학회지
• /
• 제25권5호
• /
• pp.47-51
• /
• 2011

This paper analyzes the fatigue-life of welded joints using the notch stress approach. In the notch stress approach, the notch effects are usually approximated by introducing weld-bead parameters for the local detailed weld joints. The actual bead shape is complex and 3-dimensional. It may also greatly influence the fatigue strength. In this study, the welded shape was modeled using a 3D-scanner. The critical distance method was adopted in the evaluation of the fatigue effective notch stress for the weldments. Fatigue life tests were performed to verify the present method of fatigue life estimation for two types of welded plates with longitudinal attachments. The estimated results of the present methods were applied to the results of the experiment. The results of the analysis showed that the scatter of fatigue-life for the experimental data expressed in the nominal stress was significantly reduced by applying the effective fatigue stress of the present study.

• Advances in concrete construction
• /
• 제10권2호
• /
• pp.151-159
• /
• 2020

An experimental study on the stress-strain relation of PVC-CFRP confined reinforced concrete columns subjected to eccentric compression was carried out. Two parameters, such as the CFRP strips spacing and eccentricity of axial load, were considered. The experimental results showed that all specimens failed by compressive yield of longitudinal steel bar and rupture of CFRP strips. The bearing capacity of specimen decreases as the eccentricity or the CFRP strips spacing increases. The stress-strain relation of specimens undergoes two stages: parabolic and linear stages. In the parabolic stage, the slope of stress-strain curve decreases gradually as the eccentricity of axial loading increases while the CFRP strips spacing has little effect on the slope of stress-strain curve. For the linear stage, the slope of stress-strain curve decreases as the eccentricity of axial load or the CFRP strips spacing increases. A model for predicting the stress-strain relation of columns under eccentric compression is proposed and it agrees well with various test data.

• Human Ecology Research
• /
• 제56권5호
• /
• pp.425-433
• /
• 2018

This study investigates the effect of gender role attitude and work family balance on life stress for married career women. We also explore the mediating effect of marital intimacy on the relation between gender role attitude, work family balance, and life stress. The subjects were married women from the five year data of the Korean Longitudinal Survey of Women and Family (KLoWF). Data was analyzed by descriptive statistics, Pearson correlation, structural equational models, and Sobel test with SPSS software ver. 23.0, and Amos software ver. 23.0. The findings are as follows. First, gender role attitude had a direct effect on life stress, but work family balance had no significant effect on life stress. Second, marital intimacy mediated between gender role attitude, work family balance, and life stress. In conclusion, the results can be used as basic data to prevent life stress in married career women and increase marital intimacy.

• 한국재난정보학회 논문집
• /
• 제7권3호
• /
• pp.206-219
• /
• 2011

포장 설계기준에서 중요한 요인은 응력과 변형률 분포도이다. 합리적인 응력과 변형률 분포도를 달성하기 위한 차량타이어의 접촉면적과 공기압은 매우중요하다. 본 연구에서는 이동하중 하에서 연성포장의 점탄성 특성에 관한 내용을 다루고 있으며 현장 측정시험을 통하여 실제 도로의 종횡변형률을 수치해석 결과와 비교분석 하였다. 포장거동에 대한 차량이동하중의 영향을 적절히 모사하기 위하여 단계하중을 이용한 3차원 유한요소 해석이 수행되었다. 점탄성 해석을 위하여 아스팔트 혼합물의 이완계수, E(t), 가 실험실에서 제작된 시료의 실험으로부터 측정되었다. 현장조사 결과에 의하면, 종횡변형률은 서로 상이한 값을 보였으며 전반적으로 변형률의 크기는 차량의 속도가 증가함에 따라 감소함을 보였다. 전반적으로 횡방향 변형률은 종방향 변형률에 비하여 작은값을 보였으며 그 차이는 횡방향에서 더욱 두드러진 경향을 보였다.

• Steel and Composite Structures
• /
• 제34권1호
• /
• pp.91-105
• /
• 2020

Steel-concrete composite beam with profiled steel sheet has gained its popularity in the last two decades. Due to the ageing of these structures, retrofitting in terms of flexural strength is necessary to ensure that the aged structures can carry the increased traffic load throughout their design life. The steel ribs, which presented in the profiled steel deck, limit the use of shear connectors. This leads to a poor degree of composite action between the concrete slab and steel beam compared to the solid slab situation. As a result, the shear connectors that connects the slab and beam will be subjected to higher shear stress which may also require strengthening to increase the load carrying capacity of an existing composite structure. While most of the available studies focus on the strengthening of longitudinal shear and flexural strength separately, the present work investigates the effect of both flexural and longitudinal shear strengthening of steel-concrete composite beam with composite slab in terms of failure modes, ultimate load carrying capacity, ductility, end-slip, strain profile and interface differential strain. The flexural strengthening was conducted using carbon fibre reinforced polymer (CFRP) or steel plate on the soffit of the steel I-beam, while longitudinal shear capacity was enhanced using post-installed high strength bolts. Moreover, a combination of both the longitudinal shear and flexural strengthening techniques was also implemented (hybrid strengthening). It is concluded that hybrid strengthening improved the ultimate load carrying capacity and reduce slip and interface differential strain that lead to improved composite action. However, hybrid strengthening resulted in brittle failure mode that decreased ductility of the beam.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.99-112
• /
• 1999

막장 전방에 파쇄대 등의 불연속면이 존재할 경우, 이를 미리 예측하지 못한채로 굴진을 하게 되면 파쇄대로 인해 터널 굴진에 따라 발생된 종방향 아칭에 영향을 주어 막장면 전방에 응력이 집중하게 된다. 터널 및 지하공간의 설계시에는 불확실한 설계요소를 과다하게 내포하고 있으므로 경제적이고 안정성이 확보된 터널 시공을 위해서는 터널 막장면에서의 정확한 계측으로 막장 전방의 파쇄대를 예측하여 터널 지보체계에 신속히 대비함이 필요하다. 최근의 연구결과에 의하면 3차원 절대변위계측에 의해 터널의 시공 시 굴진에 따라 지반의 강도차이로 인해 발생된 종방향 변위의 변화를 측정하여 막장 전방의 불연속면을 미리 예측할 수 있다고 하였다. 본 연구는 혼합법을 사용한 3차원 수치해석으로부터 얻어지는 변위로부터 L/C (천단부의 종방향 변위[L]와 천단부의 침하량[C]의 비 )와 S/C (측벽의 수평방향 변위[S]와 천단부의 침하량[C]의 비), (Ll-Lr)/C (좌측벽의 종방향변위[Ll]와 우측벽의 종방향변위[Lr]의 차와 천단부의 침하량[C]의 비), 평사투영법을 중심으로 지반에 파쇄대가 존재할 경우에 대해 여러 가지 초기 지중응력조건에서 터널 굴착에 따른 3차원 절대 변위를 분석하여 그 존재를 예측할 수 있는 기법을 제시하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권2호
• /
• pp.33-44
• /
• 2013

강바닥판의 구조상세에 대하여 많은 연구가 이루어지고 있으나, 대부분의 연구가 표준형의 U-rib를 대상으로 실시되었을 뿐, 강바닥판 건설초기의 개단면리브형식에 대한 연구는 미진한 것으로 조사되었다. 본 연구에서는 공용연수 31년된 개단면세로리브형식의 강바닥판 교량의 피로균열 발생 원인을 조사하기 위하여 실교통류하에서의 계측 데이터를 통하여 대상구조상세의 거동 특성을 분석하였다. 또한 상세구조해석을 통하여 대상교량을 통과하는 대표트럭하중을 추정하고, 상세영향면해석을 이용하여 대상구조상세의 응력 및 변형특성을 분석하였다. 이들 분석에 기초하여 피로균열이 발생된 대상구조상세의 보강방안을 제시하고, 이에 대한 타당성을 검증하였다. 연구결과, 개단면리브에서의 피로균열의 발생원인은 개단면부에서의 전단변형에 의한 응력증가 및 차량의 이동에 따른 교번응력의 발생에 기인하는 것으로 조사되었으며, 국부구조상세에 대한 피로설계에서는 구조상세의 거동특성이 충분히 반영된 상세해석에 근거한 설계를 실시하는 것이 중요하다는 것을 알 수 있었다.

• 보건교육건강증진학회지
• /
• 제33권1호
• /
• pp.33-40
• /
• 2016

Objectives: The study aimed to determine the prevalence of and the relationship between stress and musculoskeletal symptoms among undergraduate students. Methods: The convenience sampling method was used for this cross-sectional survey that was conducted from June 16, 2014 to June 21, 2014. A total of 223 subjects (88 men, 135 women) participated in the study and completed a comprehensive self-administered questionnaire requesting information on demographics, medical history, lifestyle, and musculoskeletal symptoms. The Depression Anxiety Stress Scale (DASS) was also administered to the subjects. A total of 223 subjects from 12 universities completed the questionnaires; the data obtained was used for the final statistical analysis. Results: Women had a higher prevalence of stress and musculoskeletal symptoms. Adjusting for sex and age, subjects who were stressed had a 2.85-fold higher risk of musculoskeletal symptoms than subjects who were not stressed. Stratified analyses by sex also showed that women had a higher risk of musculoskeletal symptoms (Modified OR 2.98, 95% CI 1.38-6.45). Conclusions: We found a positive association between stress and musculoskeletal symptoms in undergraduate students; sex differences were present. Further dose-response relationship between stress and musculoskeletal symptoms will be identified by a longitudinal study with a larger sample size.

• 아동학회지
• /
• 제36권4호
• /
• pp.163-176
• /
• 2015

The purpose of this study is to examine the longitudinal causal relationships between maternal parenting stress and parenting attitudes. Relevant data from mothers with infants aged from 2 to 4 years of age was gathered from the Panel Study of Korean Children were analyzed by means of Latent Growth Modeling. The findings are as follows, First, levels of parenting stress increased whereas the extent of positive parenting attitudes decreased as children grow older. Second, the initial value of parenting stress was observed to have a negative effect on the initial value of positive parenting attitudes. Third, those mothers who generally have faster speeds of increasing parenting stress tend to have faster speeds of decreases in positive parenting attitudes. What this study clearly revealed is that the positive parenting attitudes of mothers with infants tend to improve when the mothers try to efficiently deal with their parenting stress by either acquiring appropriate parenting knowledge or receiving support from their families and communities.