• 제목/요약/키워드: Long-term compression

검색결과 173건 처리시간 0.023초

이단으로 구성된 CMOS 전력증폭기 설계 (Design of Two-Stage CMOS Power Amplifier)

  • 배종석;함정현;정혜련;임원섭;조수호;양영구
    • 한국전자파학회논문지
    • /
    • 제25권9호
    • /
    • pp.895-902
    • /
    • 2014
  • 본 논문에서는 CMOS $0.18-{\mu}m$ 공정을 이용하여 1.75 GHz 대역에서 동작하는 이단으로 구성된 CMOS 전력증폭기를 설계하였다. 무선통신시스템에 적합한 전력증폭기 설계를 위하여 ADS 모의실험을 통하여 전력이득, 출력 전력, 효율을 각각 28 dB, 27 dBm, 45 %로 설계를 하였다. 실제 제작된 전력증폭기의 성능은 전력 이득, 출력 전력, 효율은 각각 22.9 dB, 24.8 dBm, 41.3 %로 특성을 나타냈으며, 변조된 LTE(Long-Term Evolution) 신호에 대하여 인접 채널 누설비(ACLR)가 -30 dBc 이하를 만족하며, 전력 이득, 출력 전력, 효율이 각각 22.6 dB, 23.1 dBm, 35.1 %의 특성을 나타냈다.

홍삼의 골다공증에 대한 임상적 효능 연구 (Clinical Effect of Korean Red Ginseng on Osteoporosis)

  • 김남현;이환모
    • Journal of Ginseng Research
    • /
    • 제22권2호
    • /
    • pp.114-121
    • /
    • 1998
  • Osteoporosis is defined as a pathologic condition in which there occurs no change in the chemical composition of the bone, while bone resorption is abnormally increased. This compares with osteogenesis, which leads to a decrease in the amount of bone. Though many varieties of therapies have been tried, no fully effective method has been found. Korean red ginseng is an important variety of Korean ginsengs and many studies have been performed to investigate its effectiveness. But there has been no report on red ginseng's effects on osteoporosis. The purpose of this study was to determine the clinical effects of Korean red ginseng on postmenopausal osteoporosis patients. The study was designed as a double-blind study. Group I consisted of 30 postmenopausal osteoporosis patients who were administered red ginseng extracts and 15 patients who were administered maltose capsules, were included in group II. The following results were obtained after one-year administration to both groups. 1. There were no significant differences in the degree of wedging, number of compression fractures in the vertebral body, trabeculations, and Cobb's angles between the experimental and control groups. 2. Even though bone mineral density increased in the lumbar spine, and decreased in the femur, there was no significant statistical difference. 3. The serum levels of parathyroid hormone (PTH), calcium, phosphate, and alkaline phosphates showed no difference between the two groups regardless of treatment. 4. Urine Deoxy-pyridinoline (DPYD) decreased in the red ginseng group while it increased in the maltose group, but statistically there was no significant difference between the two groups. 5. The clinical presentations showed no significant differences using Visual Analog Scale. 6. The specific complications related with the long-term use of red ginseng did not occur in all patients. In conclusion, there were no statistically significant differences in clinical presentations, biochemical, and radiological studies between the red gins eng and maltose groups. No definite effectiveness of red ginseng on patients with osteoporosis was found.

  • PDF

자기치유 기능을 이용하는 SSG공법의 공학적 특성 (Engineering Properties of Self-healing Smart Grouting Method)

  • 문인종;김병일;허준;최용성;최용기
    • 한국지반공학회논문집
    • /
    • 제32권3호
    • /
    • pp.29-37
    • /
    • 2016
  • 최근 개발된 자기치유 그라우팅(SSG, self-healing smart grouting)공법은 지반의 내구성 및 차수성의 향상, 용탈 및 환경오염 방지 등의 특성을 가지고 있다. 이 연구는 SSG공법의 공학적 특성을 규명한 것으로써 기존 약액주입(LW, SGR)공법과의 공학적 특성을 비교하기 위해 겔타임 측정, 일축압축강도 시험, 투수 시험, 어독성 시험, 내화학성 시험을 수행하였다. 연구결과, SSG공법은 장 단기 차수성능 유지, 강도 발현, 내구성 확보에 유리하고 용탈에 의한 지하수 및 지반의 오염 가능성이 낮은 것으로 나타났다. 이를 통해 SSG공법은 기존 약액주입공법의 문제점들을 최소화할 수 있는 대체 공법으로 현장에 적용이 가능할 것으로 판단된다.

액화공기(Liquid Air) 예냉기반 수소액화공정 성능 해석 및 최적화 (Performance Evaluation and Optimization of Hydrogen Liquefaction Process Using the Liquid Air for Pre-Cooling)

  • 박성호;안준건;류주열;고아름
    • 한국수소및신에너지학회논문집
    • /
    • 제30권6호
    • /
    • pp.490-498
    • /
    • 2019
  • The intermittent electric power supply of renewable energy can have extremely negative effect on power grid, so long-term and large-scale storage for energy released from renewable energy source is required for ensuring a stable supply of electric power. Power to gas which can convert and store the surplus electric power as hydrogen through water electrolysis is being actively studied in response to increasing supply of renewable energy. In this paper, we proposed the novel concept of hydrogen liquefaction process combined with pre-cooling process using the liquid air. It is that hydrogen converted from surplus electric power of renewable energy was liquefied through the hydrogen liquefaction process and vaporization heat of liquid hydrogen was conversely recovered to liquid air from ambient air. Moreover, Comparisons of specific energy consumption (kWh/kg) saved for using the liquid air pre-cooling was quantitatively conducted through the performance analysis. Consequently, about 12% of specific energy consumption of hydrogen liquefaction process was reduced with introducing liquid air for pre-cooling and optimal design point of helium Brayton cycle was identified by sensitivity analysis on change of compression/expansion ratio.

이식형 단백질 전달체로서 메톡시 폴리(에틸렌 글리콜)/폴리카프로락톤 블록 공중합체의 합성 및 알부민의 방출 거동 (Synthesis of Methoxy Poly(ethylene glycol)-b-poly($\varepsilon$-caprolactone) Diblock Copolymers and Release Behavior of Albumin for Implantable Protein Carriers)

  • 서광수;전세강;김문석;조선행;이해방;강길선
    • 폴리머
    • /
    • 제28권3호
    • /
    • pp.232-238
    • /
    • 2004
  • 약물 전달체로서 메톡시 폴리(에틸렌 글리콜) (MPEG, methoxypolyethylene glycol)과 생분해성 폴리에스테르 계열의 카프로탁톤 ($\varepsilon$-CL, $\varepsilon$-caprolactone)으로 구성된 MPEG-PCL 블록 공중합체를 개환중합을 통해 합성하였다. MPEG-PCL의 결정성과 열적특성은 X선 굴절계와 시사주차열량계를 통하여 분석하였다 모델 단백질로서 알부민 (FITC-BSA, albumin bovine-fluorescein isothiocyanate)과 블록 공중합체를 동결 제분 후, 직접압축 성형방법에 의해 웨이퍼를 제조하였다. 알부민의 방출은 pH 7.4 인산염완충액을 사용하여 37$^{\circ}C$에서 14일 동안 관찰하였다. 알부민의 방출양은 형광분광기를 통하여 FITC의 강도에 의해 결정되었다. 웨이퍼의 형태학적 관찰은 디지털 카메라와 전자주사현미경을 통하여 관찰하였다. 알부민의 방출 속도와 초기 burst는 MPEG-PCL 블록 공중합체의 분절 내에서 폴리(에틸렌 글리롤)의 분자량이 증가할수록 또한 폴리카프로락톤의 분자량이 감소할수록 많은 초기방출과 단축된 방출기간을 보였다.

고분자 전해질 연료전지 스택용 고무 개스킷의 노화특성 연구 (Aging Property Studies on Rubber Gasket for Polymer Electrolyte Membrane Fuel Cell Stack)

  • 강동국;허병기;이동원;서관호
    • 공업화학
    • /
    • 제22권2호
    • /
    • pp.149-154
    • /
    • 2011
  • 연료전지 스택 작동환경에서의 열노화 특성을 살펴보기 위하여 다양한 고무 compound의 내열 및 압축 영구 줄음률의 평가를 실시하고, 스택의 장시간 운전을 통해 접합할 수 있는 대상액인 $H_2SO_4$, $H_2O$, LLC (Ethylene glycol : $H_2O=50:50$)에 대하여 장시간 평가를 실시하였다. NBR과 EPDM은 시간이 경과할수록 침적액의 변색하는 것을 알 수 있었으며, VMQ는 $H_2SO_4$ 분위기에서 시간에 따라 고무가 노화되는 것을 TGA, SEM, EDS 분석을 통하여 확인하였다.

초연약 준설 매립지반의 비선형 유한변형 압밀해석기법 - Part II: 해석기법과 Craney Island 사례분석 (Analysis Method for Non-Linear Finite Strain Consolidation for Soft Dredged Soil Deposit - Part II: Analysis Method and Craney Island Case Study)

  • 최항석;곽태훈;이철호;이동섭;티모시 스탁
    • 한국지반공학회논문집
    • /
    • 제27권11호
    • /
    • pp.5-15
    • /
    • 2011
  • 본 논문에서는 압축성이 매우 큰 준설 매립지반의 비선형 유한변형 압밀거동을 평가하기 위해 두 가지 압밀해석방법이 제시되었다. 이를 위해 동반논문에서 얻어진 초기간극비, 비선형의 간극비-유효응력 관계와 간극비-투수계수 관계를 비선형 압밀 물성치로 적용하였다. 단순화된 Morris의 간편 이론해(2002)와 대표적인 일차원 비선형 유한변형 압밀 프로그램인 PSDDF(Primary Consolidation, Secondary Compression, and Desiccation of Dredged Fill)의 해석결과를 일련의 실내실험을 통해 얻어진 인천 준설토와 카올리나이트의 자중압밀 침하거동과 비교하여, 실제 준설 매립지반의 장기간 비선형 유한변형 압밀거동을 모사하는데 두 방법의 적용이 타당함을 보였다. 또한, Craney Island 인공섬 사례분석을 통하여 적절한 비선형 유한변형 압밀 파라메터 선정의 중요성과 준설 매립지반의 압밀거동 평가시 PSDDF의 적용성을 제시하였다.

리튬 이온 전지용 개스킷 고무 물성에 미치는 가교조제의 영향 (Effects of Activator on Rubber Characteristics for Gasket to Lithium Ion Battery)

  • 강동국;김혜영;강영임;허병기;서관호
    • 공업화학
    • /
    • 제22권4호
    • /
    • pp.395-399
    • /
    • 2011
  • 리튬 이온 전지에 사용되는 개스킷 재료는 내전해액성, 전기 절연성, 압축 영구 줄음률, 비오염성, 저온성이 요구된다. 개스킷 고무에 적용되는 가교조제의 영향을 살펴보기 위하여 리튬 이온 전지에 있어 대표적 용매인 propylene carbonate에서 용해도 지수의 차가 큰 ethylene propylene diene monomer (EPDM)에 금속산화물인 가교조제의 함량을 조정하여 compound를 배합하였다. 이렇게 배합된 compound를 리튬 이온 전지의 작동환경을 고려하여 전해액에 대한 장기평가 및 압축 영구 줄음률, 저온성에 대한 평가를 실시하였다. 본 실험에서는 다양한 가교조제를 사용하여 가교조제에 따른 고무재료의 물리적 화학적 특성 및 리튬 이온 전지에의 영향에 대하여 검토하였다. 가교조제로 ZnO를 사용한 고무에서 1000 h까지의 공기 노화 시험 및 전해액의 대표 유기용매인 propylene carbonate 침적시험에 대해 안정적인 물성을 얻을 수 있었으나, 이온 용출성 평가에서는 $Zn^{2+}$가 용출되기 때문에 리튬 이온 전지용 개스킷에 적용되는 고무 배합에서는 ZnO 사용을 제한하여야 한다.

K-COIN 시험부지 특성화를 위한 암석역학 실내실험 기초 연구 (A Fundamental Study on Laboratory Experiments in Rock Mechanics for Characterizing K-COIN Test Site)

  • 최승범;김태현;권새하;김진섭
    • 터널과지하공간
    • /
    • 제33권3호
    • /
    • pp.109-125
    • /
    • 2023
  • 고준위방사성폐기물처분장은 공학적/천연 방벽 등을 통해 처분장의 안전성을 확보한다. 이러한 안전 수단은 다양한 방법을 통해 장/단기적 성능을 평가하고 검증되어야 한다. 한국원자력연구원은 원내에 위치한 지하연구시설인 KURT를 이용해 다양한 현장 실증실험을 수행해왔다. 선행 시험 종료 후, 개선된 형태의 실증실험인 K-COIN을 수행하기 위해 개념 설계안을 도출하고 상세 실험계획을 수립 중이다. KURT 내부에 K-COIN 실험부지 선정을 위한 예비 부지조사를 수행하였다. 연구 모듈(research gallery, RG) 세 구역에 약 20 m 심도의 시추공 총 15개를 시추하여 시추코어를 확보하고 암석 실내시험에 적합한 구간을 선정하여 무결암 시험편을 준비하였다. 준비된 시험편을 사용하여 물리적 특성 측정, 단축압축시험, 간접인장시험, 삼축압축시험을 수행했으며 이를 통해 무결암의 비중, 공극률, 탄성파 속도, 단축압축강도, 탄성계수, 포아송비, 간접인장강도, 점착력, 내부 마찰각을 측정하였다. 간단한 통계 처리를 수행한 결과, 시추 구역과 심도(상부 0~10 m, 하부 10~20 m)에 따른 무결암 물성의 차이는 크지 않은 것으로 확인되었다. 가장 대표적인 암석 물성인 단축압축강도를 바탕으로 판단하면, 모든 시추 구역과 심도에서 매우 강한 암석으로 분류되어 모든 후보 지역에서 역학적인 안전성을 확보한 것으로 판단된다.

Physio-mechanical and X-ray CT characterization of bentonite as sealing material in geological radioactive waste disposal

  • Melvin B. Diaz;Sang Seob Kim;Gyung Won Lee;Kwang Yeom Kim;Changsoo Lee;Jin-Seop Kim;Minseop Kim
    • Geomechanics and Engineering
    • /
    • 제34권4호
    • /
    • pp.449-459
    • /
    • 2023
  • The design and development of underground nuclear waste repositories should cover the performance evaluation of the different components such as the construction materials because the long term stability will depend on their response to the surrounding conditions. In South Korea, Gyeonju bentonite has been proposed as a candidate to be used as buffer and backfilling material, especially in the form of blocks to speed up the construction process. In this study, various cylindrical samples were prepared with different dry density and water content, and their physical and mechanical properties were analyzed and correlated with X-ray CT observations. The main objective was to characterize the samples and establish correlations for non-destructive estimation of physical and mechanical properties through the utilization of X-ray CT images. The results showed that the Uniaxial Compression Strength and the P-wave velocity have an increasing relationship with the dry density. Also, a higher water content increased the values of the measure parameters, especially for the P-wave velocity. The X-ray CT analysis indicated a clear relation between the mean CT value and the dry density, Uniaxial Compression Strength, and P-wave velocity. The effect of the higher water content was also captured by the mean CT value. Also, the relationship between the mean CT value and the dry density was used to plot CT dry densities using CT images only. Moreover, the histograms also provided information about the samples heterogeneity through the histograms' full width at half maximum values. Finally, the particle size and heterogeneity were also analyzed using the Madogram function. This function identified small particles in uniform samples and large particles in some samples as a result of poor mixing during preparation. Also, the μmax value correlated with the heterogeneity, and higher values represented samples with larger ranges of CT values or particle densities. These image-based tools have been shown to be useful on the non-destructive characterization of bentonite samples, and the establishment of correlations to obtain physical and mechanical parameters solely from CT images.