• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.184-185
• /
• 2008

Modal analysis is an important and essential process in design of a high speed machining center. Generally, modal analysis of a built-in spindle system has not taken the work piece's shape and dimension into consideration. Since small and long work pieces influence greatly the natural frequency of the entire system, the high speed spindle system which continuously makes small machine parts by long work pieces for improvement of machining time has to consider the machining work pieces. Therefore frequency characteristics of the spindle system with long work pieces are studied in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.11
• /
• pp.99-107
• /
• 2009

Since a long work piece influences the natural frequency of the entire system with a miniature high speed spindle, a bar-feeder is used for a long work piece to improve the vibration characteristics of a spindle system. Therefore, it is very important to design optimally support positions between a bar-feeder and a long work piece for a miniature high speed spindle system. The goal of the current paper is to present an optimization method for the design of support positions between a bar-feeder and a long work piece. This optimization method is effectively composed of the method of design of experiment (DOE), the artificial neural network (ANN) and the genetic algorithm (GA). First, finite element models which include a high speed spindle, a long work piece and the support conditions of a bar-feeder were generated from the orthogonal array of the DOE method, and then the results of natural vibration analysis using FEM were provided for the learning inputs of the neural network. Finally, the design of bar-feeder support positions was optimized by the genetic algorithm method using the neural network approximations.

• Journal of the Optical Society of Korea
• /
• v.3 no.2
• /
• pp.74-79
• /
• 1999

We present a simple design rule for a passive temperature-compensating optical package. We also present experimentally that a package fabricated by using the design rule compensates the temperature dependence of the resonant wavelength of an optical long period fiber grating by varying the strain inside the fiber, The package fabricated in this work consists of two pieced of brass tube, 10 mm long, and a piece of nylon rod, 45.4 mm long. It is shown that the package can compensate the temperature-induce wavelength shifts of the long period grating to a range of 6.8 pm/$^{\circ}C$, compared with 0..48 nm/$^{\circ}C$ for an uncompensated grating. The reduced strength of the fiber caused by exposure to ultraviolet limits the performance of the package to the range operating temperature form -3 $^{\circ}C$ to 7$0^{\circ}C$.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.195-202
• /
• 2006

High-speed machining (HSM) with excellent quality and dimensional accuracy has been widely used to create 3D structures of metal and plastics. However, the high-speed machining process is not suitable for the rapid realization of 3D thin-walled product because it consumes considerably long time in fixturing process of a work piece. In this paper, an effective rapid manufacturing process is proposed to fabricate 3D thin-walled products directly using HSM, phase change filling and ultrasonic welding. The filling process is useful to hold the thin-walled product during the machining step. The ultrasonic welding process is introduced to make one piece product from two piece parts that are machined by HSM and filling process. The proposed rapid manufacturing (RM) process has been shown that the RM process enables to fabricate the 3D thin-walled products using ABS plastics and aluminum metals from 3D CAD data to functional parts.

• Cartoon and Animation Studies
• /
• s.40
• /
• pp.1-31
• /
• 2015

The Korean animation that has relatively short history compared to the Western Europe and Japan's animation started out from the non-commercial short-piece animation produced as part of advertisement animation and culture movie in the later part of 1950s. In 1960s, the culture movie animation reflecting for the Movie Act and cultural policies has hardly been mentioned in the history of Korean animation, but they are the precious cultural work produced prior to the theatrical long-piece animation. In particular, compared to the 15-second short CF animation, the short-piece animations are ranging for 4 minutes to 10 minutes as the work pieces with the historic value to measure the level of the Korean animation at that time. in 1960s, approximately 20 short-piece animation works were produced and they contained the educational contents to enlighten general public in the process of modernization policy. Those short-piece animations produced in cultural movie at the National Film Production Center of Korea had been produced not only in cell-facilitating cartoon animation, but also in paper animation and puppet animation. In this background, this thesis takes a close look to the short-piece animation works produced in the National Film Production Center of Korea in 1960s. While there was almost no studies of early short-piece animation other than CF works, it is meaningful to discover and analyze the works, and, Director Park Young-il, Director Han Sung-hak, Director Jung Do-bin, Director Shin Dong-hyun, Director Nelson Shin and others participated in the creative work process have worked as the animation directors for theater that the analysis on the works would be considered as important fundamental studies to understand the Korean animation. Under this thesis, it is intended to study the historic implication and formative characteristics around some 10 work pieces to affirm participating personnel, including directors, for the short-piece animation created by the National Film Production Center of Korea as well as the situation of time to launch the National Film Production Center of Korea in 1960s. Through this effort, it is intended to come up with the starting point to process enriched researches on non-commercial short-piece animation as well as contemplation on the Korean animation history that have been neglected in the study of the Korean animation history through such effort.

• Journal of Science of Art and Design
• /
• v.8
• /
• pp.45-61
• /
• 2005

The 2D animation screen is a screen work that is produced on the plane. So, it is superficial in terms of space. Therefore, we expressed via picture technique that uses the movement of camera and back-ground in order to recreate the image of realistic feeling that has multiple effect. Though all multiple-effects were expressed realistically in the early Disney animation of the United States, Japan used the expression of Follow Pan profoundly to provide the animation with economic expression of picture and the depthof screen in order to realize a new technical expression of limited animation while it was producing TV series works in 1960s. Now it is positively expressed even in the United States, too. This study tries to analyze the example that applied the long piece works of Japan which was expressed via the Follow Pan, that is, the movement of camera, to the real approach.

• The Journal of Society for e-Business Studies
• /
• v.12 no.3
• /
• pp.235-249
• /
• 2007

Workflow systems are software systems that control the execution of long-term processes. Members of an organization are in charge of executing processes. A work assignment policy, i.e who should perform a certain piece of process, has to be modeled and implemented in workflow systems. Organizations may have a large variety of problems in work assignment, and it may not be feasible to devise a single model to cover all problems. In this paper, we introduce generality to work assignment design problems in workflow systems We provide a meta-model based approach which enables us to define arbitrary problem oriented work assignment policies.

• Journal of Mechanical Science and Technology
• /
• v.19 no.8
• /
• pp.1576-1581
• /
• 2005

Generally, the optical components are fabricated by grinding, lapping, and polishing. And, those processes take long time to obtain such a high surface quality. Therefore, in the case of large optical component, the on-machine inspection (OMI) is essential. Because, the work piece is fragile and difficult to set up for fabricating and measuring. This paper is concerned about a swing-arm method for measuring surface profile of large optical concave mirror. The measuring accuracy and uncertainty for suggested method are studied. The experimental results show that this method is useful specially in lapping process with the accuracy of $3\~5\;{\mu}m$. Those inspection data are provided for correcting the residual figuring error in lapping or polishing processes.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.12
• /
• pp.163-170
• /
• 2002

The quality of a precision product, in general, relies on the accuracy and precision of its manufacturing and inspection process. In many cases, the level of precision in the manufacturing and inspection system is also dependent on the positioning capability of tool with respect to the work piece in the process. Recently the positioning accuracy level has reached to the level of submicron and long range of motion is required. For example, for 1 GDARM lithography, 20nm accuracy and 300mm stroke needs. This paper refers to the lithography stage especially to fine stage. In this study, for long stroke and high accuracy, the dual servo system is proposed. For the coarse actuator, LDM (Linear DC Motor) is used and for fine one VCM is used. In this study, we propose the new structure of VCM for the fine actuator. It is 3 axis precision positioning stage for an aligner system. After we perform the optimal design of the stage to obtain the maximum force, which is related to the acceleration of the stage to accomplish throughput of product. And we controlled this fine stage with TDC. So we obtained 50nm resolution. So later more works will be done to obtain better accuracy.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.443-452
• /
• 2003

People have been getting interested in the Orientalism and it has come up in various areas due to scientific progress. I designed uniforms, which was simple and western, to show its symbolic meanings in the Orientalism. And I have been trying to generalize uniforms with originality and beauty. I have studied the process of the Orientalism and its changes and transitions, concepts and origins in history. And I applied the styles of Korean, Japanese and Chineses costume on it. I also referred to characters of uniforms, which already had images of Korea, Japan and China. Firstly, Korean styles have a contrast in colors by application of Taegeuk. And they gave lines with dark colors in black one-piece dress. This makes people who are wearing looking slimmer. White ramie top looks fresh and Korean traditional tie called Maedeup is set up for button. Secondly, Japanese styles were mainly Kimono style, one piece. They changed into two pieces designed to be active. So, it has emphasized the image of Kimono with Obi at the waist. Thirdly, Chinese styles basically are Chipao style, which has a Chinese collar and a long skirt, which has opening. But they gradually changed into short skirts and more open in the chest. For one of them, they gave lines in the side of chest, sleeves and skirt to be more natural. The costumes have kept their positions as a part of mass society that grows and changes with speed. And oriental uniforms are not just uniforms any longer only for work. It is quite symbolic like a 'second face' as it represents images for their countries and enterprises.