• 한국환경과학회지
• /
• 제31권5호
• /
• pp.389-404
• /
• 2022

The purpose of this study is to evaluate the vegetation recovery status of Mudeungsan National Park Jungmeorijae, Jeungsimsa district restoration site, and the Shimwon Valley ecological landscape restoration site in Jirisan National Park. Compared to the control plots, the Jungmeorijae restoration site was analyzed to have height growth of about 73.5%, the average species diversity index of about 75.2%. and the average similarity index was recovered to 7.75%. In the case of the restoration site in Jeungsimsa district, the height growth compared to the control plots was about 69.2%, the average species diversity index was about 55.0%. and the average similarity index was recovered to 25.65%. In the case of the Shimwon Valley ecological landscape restoration area, the height growth compared to the control plots was about 32.6%, the average species diversity index about 176.7%. and the average similarity index was recovered to 0.85%. The restoration site of the Jeungsimsa district was planted with relatively large trees during restoration work, and it took a relatively long time(20 years). Also, the site had less limiting factors due to the low elevation, allowing the degree of vegetation recovery to be higher than that of other sites.

• 한국지형학회지
• /
• 제26권1호
• /
• pp.15-26
• /
• 2019

In this study, we investigated the grain size, lithological type, and shape of coarse bed materials in the upper and middle reaches of Gongneungcheon River. For this purpose, 11 sampling points were selected along the river. For 100 samples of the coarse bed materials at each point, three axes (long, intermediate, and short) of samples were measured, and their lithological types were also identified. By measuring grain size, the sphericity and flatness of samples were calculated. Finally, every particle was classified into four shape categories: sphere, disc, blade and rod. We found that the grain size in incised meandering reach is the largest. This is mainly due to the supply of coarse materials from steep valley sides along the meandering channel. According to the lithological analysis, all samples were identified as granite, gneiss and schist, and quartz. The proportion of granite decreased, whereas the proportion of gneiss and schist increased downstream. These patterns indicate that the bedrock distribution within the study area accounts for the downstream lithological variation of coarse bed materials. With regard to the grain shape, sphericity gradually decreased while flatness gradually increased downstream. In the case of the shape classification, unlike the general downstream pattern of grain shape, the proportion of the sphere type decreased and the proportion of the blade type increased downstream. Such a reversal change in the downstream direction turns out to be determined by the lithology (such as foliation, bedding and the pattern of weathering) of coarse bed materials.

• Geomechanics and Engineering
• /
• 제38권1호
• /
• pp.15-28
• /
• 2024

The rapid development of the economy has compelled the widen of highways, and the main challenge of this undertaking lies in the uneven settlement of road embankments. Through field and numerical experiments, this study explores the deformation mechanism of shallow buried pipelines due to road widening. The utilization of Plaxis3D software, which is adapt at simulating complex engineering geological conditions, enables the simulation of the settlement of both the central and right-side road embankments. Comparing with other numerical software such as ABAQUS and COMSOL, Plaxis provided more constitutive models including HS, HSS and Hoek-Brown model. The work concludes that the uneven settlement of road cross-sections is positively correlated with the horizontal distance from the pipeline, with a maximum settlement of 73 mm observed after construction. Furthermore, based on the Winkler's assumption, theoretical settlement and stress calculation methods are established. Results indicate that the maximum difference between the calculated values of this formula and simulated values is 1.9% and 7%, respectively. Additionally, the study investigates the stress and settlement of the pipeline's top under different angles to understand its behavior under various conditions. It finds that with traffic loads applied to the new embankment, a lever effect occurs on the lower pipeline, with the fulcrum located within the central isolation zone, leading to a transition in curve type from "single peak and single valley" to "double peak and single valley." Moreover, the settlement of pipelines on both sides of the central isolation zone and the normal stress of the pipeline's top section are symmetrical.

• 한국병원경영학회지
• /
• 제13권3호
• /
• pp.1-16
• /
• 2008

According to Myers (1984) and Myers and Majluf(1984), there exists a financial hierarchy from internal to external financing, from long-tenn debt to equity, due to information costs. The purpose of this study is to assess the profit-making corporation of healthcare institutions. Data was collected from 130 hospital presidents and financial managers. We analysed the frequency and one way ANOVA by SPSS Windows 14.0K. The major findings of the study were as follows: We found that the priorities which a healthcare institutions financing were internal financial, other allowance, a credit loan, a security loan, and a lease through this study. The priorities which a healthcare institutions raised the capital differed as to the number of beds and revenues. The priorities were no difference from ownership, location and an annual business.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.180-182
• /
• 2005

Fingerprint-based identification is known to be used for a very long time. Owing to their uniqueness and immutability, fingerprints are today the most widely used biometric features. Therefore, recognition using fingerprints is one of the safest methods as a way of personal identification. But fingerprint identification system has a critical weakness. Since the fingerprint identification time dramatically increase when we compare the unknown fingerprint's minutiae with fingerprint database's minutiae. In this paper, a ridge orientation extraction method using Index table is proposed to solve the problem. The goal of fast direction image extraction is to reduce the identification time and to improve the clarity of ridge and valley structures of input fingerprint image.

• Earthquakes and Structures
• /
• 제3권6호
• /
• pp.853-867
• /
• 2012

In this paper, a new type of passive energy dissipating system similar to added damping and stiffness (ADAS) and triangular added damping and stiffness (TADAS) is proposed and implemented in the analytical model of a building with hybrid structural system in the structure's base which we call it; Telescopic column. The behavior and performance of a high rise R.C. structure equipped with this system is investigated and compared with conventional base isolation systems such as rubber isolator bearings and friction pendulum bearings. For this purpose a series of ground acceleration records of the San Fernando, Long Beach and Imperial Valley earthquakes are used as the disturbing ground motions in a series of numerical simulations. The nonlinear numerical modeling which includes both material and geometric nonlinearities were carried out by using SAP2000 program. Results show suitable behavior of structures equipped with telescopic columns in controlling the upper stories drifts and accelerations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.530-532
• /
• 2002

This paper presents an optimum design of herringbone grooved journal bearing for spindle motor of hard disk drive (HDD) system. In addition to the conventional “rectangular” groove, various groove profiles are designed. The stiffness and damping coefficients of the oil film and frictional torque are calculated and compared for tile various groove profiles. The “circular”, “valley”, and “reversed saw tooth” grooves do not produce high direct stiffness, since they partly increase the groove depths in the direction of lubricant flow, causing to reduce the pumping action of the bearing. The maximum direct stiffness can be obtained by the “rectangular”, “saw tooth”, and “step” grooves. With the same cross sectional area of the grooves, these three grooves have the same maximum stiffness, damping coefficients, and frictional torque. Among these recommendable grooves, the saw tooth groove may keep its original profile for long, enduring metal-to-metal contact during startup and shutdown.

• 한국식생활문화학회지
• /
• 제9권1호
• /
• pp.61-69
• /
• 1994

Northern Kyungbuk around Andong is a mountainous and more or less dry region geomorphogically. Since this area located in the valley was less invaded by foreign countries, the folk traditions have been maintained for a long time. Also as the center of Confucian culture, this region respects ceremonies and so, the simple and noble ceremonial-foods such as Ddok, Hankwas, and Buchiki have been firmly preserved in many distinguished families. And besides Andong-Soju, many traditional liquors produced in different methods can be found in this region. As Gogi-Sikhae(a fermented beverage utilizing rice and fish) is still preserved in eastern coastal area, Sosikhae(Sikhae without fish) is maintained in this region and furthermore the unique Andong Sikhae developed by modifying Sosikhae is being consumed currently. Since it is difficult to get fish here geographically, the soybean foods were developed for protein intake, for example, various fermented soybean pastes, Andong-Songuksu(a hand-made noodle using raw soybean flour), and Siragiguk(a vegetable soup).

• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.59-65
• /
• 2018

A new single-stage flyback power converter with PFC for electrolytic capacitor-less LED driver is proposed in this study. This method minimizes the peak-to-average ratio of the LED driving pulsating current by adding the LED driving current near the LED current valley area, as well as the third harmonic component injection into the input current. The reduced peak current value of the LED drive current minimizes the thermal stress of the LED itself, thereby increasing the reliability of the LED, as well as achieving a long lifetime. Simulation and experimental results show the usefulness of the proposed topology.

• 한국산림과학회지
• /
• 제77권4호
• /
• pp.401-413
• /
• 1988

내장산국립공원 내장사지구의 이용객심리행태 및 환경에 대한 이용객영향을 조사하기 위해서 3개의 주요피크닉지역에서 설문조사와 순간밀도조사를, 주요통과지점에서 출입객 수 조사를 하였으며 환경영향은 실측조사를 하였다. 총탐방객 수는 1984년부터 100만명/연 수준으로 안정을 보이고 있었다. 환경영향은 등산로와 케이블카 종점부근, 전망대와 금선계곡간 사면에서 매우 심하였다. 봄철 피크시에는 약 5,000명, 가을 단풍철 피크시에는 약 53,000 명이 동시에 체류하는 것으로 추정되었다. 총입장객 중 약20% 가금선 및 원적계곡을 이용하였고, 나머지 80%는 잔디광장, 케이블카만 이용하고 퇴장하는 것으로 나타났다. 이용특성은 원거리형 국립공원형이었으며, 가을철 단풍구경이 주이용동기이었다. 이용면적증가에 따른 이용객의 만족도는 유의하게 차이를 나타내지 않았으며, 직각회전방법에 의한 인자분석결과, 이용객의 만족도에 크게 영향을 미치는 제1인자는 주변경관에 관한 인자로 자연파괴, 혼잡도, 소음, 주변청결상태 순으로 부하되어 있었다. 다음으로 영향을 미치는 제2인자는 시설관리인자로서 화장실 수, 쓰레기통 수, 식수량, 안전성 순으로 부하되어 있었다.