• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.5
• /
• pp.884-891
• /
• 2007

Comparing with the conventional transformer without the air gap, a contact-less transformer with the large air-gap (4.8cm) between the long primary winding and the secondary winding has the increased leakage inductance and the reduced magnetizing inductance. By the increased leakage inductance and the reduced magnetizing inductance on the primary of the contact-less transformer, a good deal of the primary current circulates through magnetizing inductance, which results in a massive loss and the high voltage gain characteristics for load variations in contact-less power supply (CPS). To consider these characteristics, in this paper, the efficiency characteristics of the contact-less power supply using a series resonant converter is presented, described and verified through theoretical analysis, computer simulation and experimental test of 2.5kW prototype.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.4
• /
• pp.265-276
• /
• 2004

Genetic Algorithm(GA), that is shown stable performance to find an optimal solution, has been used as a method of solving large-scaled optimization problems with complex constraints in various applications. Since it takes so much time to execute a long computation process for iterative evolution and adaptation. In this paper, a hardware-based adaptive GA was proposed to reduce the serious computation time of the evolutionary process and to improve the accuracy of convergence to optimal solution. The proposed GA, based on steady-state model among continuos generation model, performs an adaptive mutation process with consideration of the evolution flow and the population diversity. The drawback of the GA, premature convergence, was solved by the proposed adaptation. The Performance improvement of convergence accuracy for some kinds of problem and condition reached to 5-100% with equivalent convergence speed to high-speed algorithm. The proposed adaptive GAP(Genetic Algorithm Processor) was implemented on FPGA device Xilinx XCV2000E of EHW board for face recognition.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1742-1748
• /
• 2020

TSSD, TSSP, and TSSP2 of hydrogen for optimized-Zirlo (Zirlo™) alloy were measured by DSC in the range of 53-457 wppm. Solvus curves of the TSSs are derived and proposed in this study. The results show that the temperature gap between TSSD and TSSP solvus lines of Zirlo™ are similar to those of other zirconium alloys, but another gap between the TSSD and TSSP2 line differs significantly. In particular, the TSSP2 solvus line becomes closer to the TSSD solvus line than to TSSP unlike Zircaloy-4, so ΔT_TSSD-TSSP2 of Zirlo™ decreases with decreasing temperature. This implies that hydride reorientation can take place more significantly in Zirlo™ than in Zircaloy-4, and the limited temperature variation of 65 ℃ during the vacuum drying and the cooling-down process may not be sufficient to prevent the triggering of hydride reorientation in Zirlo™ cladding under long-term dry storage.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.101-104
• /
• 2003

The real test panel with the $200{\mu}m$ discharge gap in a coplanar AC plasma display panel was investigated. The auxiliary electrode was placed between two sustain electrodes and used for providing wall charges and prime particle during sustain period. The luminous efficiency had the maximum value when the voltage of the auxiliary pulses was 20 ${\sim}$ 100[V]. The luminous efficiency of coplanar long-gap discharge with auxiliary electrode was 2.6 times as much as that of the conventional structure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1579-1583
• /
• 2008

We proposed the new structure of ac plasma display panel(PDP) to improve the luminous efficacy and driving voltage characteristics. Through two-dimensional numerical simulations, we analyzed the effects of new counter discharge type, which consists of counter sustain electrodes and auxiliary electrodes. Generally, an advantage of AC PDP with the counter sustain electrodes has been known for the driving characteristics of the low voltage. In this work, the new counter structure using the ignition discharge by the auxiliary pulse applied to the address electrode showed the result of the increased luminous efficacy. The short gap discharge between two auxiliary electrodes on the front plate could intensity the long gap discharge between counter electrodes. The reliability of simulation result could be confirmed by the experimental result in the test panel.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.155-162
• /
• 2018

This study attempts to analyze the consumers' preference on Korean Red Ginseng Tonic, which is an essential product to revitalize Korean ginseng industry, using choice experiment method. The attributes used in the choice experiment were the ginseng age, good agricultural products(GAP), sugar, and price. A total of 1,796 experiments were collected and the value of each preferred attributes was estimated using a multinomial logistic model. The result shows that the products made from six-year-old and GAP(Good Agriculture Practice) approved Korean ginseng with less sugar were preferred. These estimated monetary values of marginal willingness to pay were about 94,000 KRW, 89,000 KRW, 5,000 KRW, respectively. Thus, the efforts to introduce and advertize GAP approved ginseng while developing new products with preferred attributes by general publics are necessary in the short run. In addition, we may need to consider developing the way to promote products using 4- and 5-year-old ginsengs, which are relatively underestimated in their health effectiveness but highly productive for farmers in the long run.

• Journal of Engineering Education Research
• /
• v.21 no.1
• /
• pp.44-55
• /
• 2018

The purpose of this study is to investigate the relationship between post - employment job satisfaction and both short-term (4-12 weeks) and long-term (12+weeks) on-site training. For this purpose, 405 graduates who had completed on-site training (205 short-term, 200 long term) during the school year were surveyed. The results of the comparative analysis of both short-term and long-term on-site training participants are as follows: In both short-term and long-term on-site training, it was found that on-site performance during the school year did not directly affect post-employment job satisfaction. In the case of short-term on-site training participants, job match and organizational commitment were found to have no mediating effect on the correlation between on-site training performance and job satisfaction. On the other hand, in the case of long-term on-site training participants, the analysis showed that job match and organizational commitment had mediating effects on the correlation between on-site training performance and job satisfaction. These effects are not solely attributable to differences in duration of training; the differences in operating systems and the degree of preparation derived from these systems also affect the level of on-site training for students, businesses, and schools. This paper summarizes these findings and suggests the following improvement plans for on-site training in the future: First, short-term on-site training is required to establish a systematic basis in order to enhance students' preparedness level. Second, both short-term and long-term on-site training should improve the skills and field understanding for students' majors through systematic quality management during the training period. Third, it is necessary for universities to increase expectations and quality of short-term on-site training for all involved while simultaneously reducing the gap between educational goals and practice in this field.

• Journal of Ecology and Environment
• /
• v.32 no.2
• /
• pp.87-96
• /
• 2009

Pinus thunbergii plantations in Pohang-si, Gyeongsangbuk-do, Korea, are of low ecological quality, with arrested succession and a high proportion of ruderal species. To improve the quality of the habitat, we created canopy gaps ($\sim42\;m^2$) and monitored changes in abiotic (light availability, canopy openness) and biotic (survival and growth of seedlings and understory communities) variables in 2007 and 2008 in plots that had received one of five types of treatment: cutting of canopy trees and removal of the understory (CU), cutting of canopy trees only (C), girdling of canopy trees and removal of the understory (GU), girdling of canopy trees (G) or control. Each treatment was applied to three replicate plots. Abiotic variables did not significantly differ among treatments. Survival rates of target species were slightly lower in the CU, G and control conditions. Based on logistic regression analysis, the only significant growth factor affecting survival was height growth. Positive effects of seedling height and leaf area growth on survival were also detected, but did not reach statistical significance. In treatment G, gradual improvement of overstory conditions and mitigation of competition by limitation of disturbance to the understory community were likely to have promoted seedling growth. There were no significant effects of gap treatments on changes in species abundance (cover and richness) and composition of understory between the study years. This result implies that the small gaps created in our study may be below the threshold size to affect understory growth. However, the results of this study are based on a short-term investigation of only two years. Long-term research is strongly recommended to clarify the effects of gap treatment on plant communities in afforested areas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.3
• /
• pp.311-318
• /
• 2017

Several types of attachments have been used for implant supported and/or retained overdentures. Locator is one of the stud type attachments and it has been generally used. However, the colored matrix is resilient and vulnerable to wear, so frequent post-insertion maintenance is needed. To solve this problem, it is necessary to introduce innovative attachment system. Overdentures using Air Gap attachment (AGA) has improved masticatory function and facial esthetics. AGA is made of metal, so it could be more resistant to wear or friction than the other resilient attachments. Nevertheless, AGA plays a role in stress breakers because it allows movement during denture movement with predetermined gap. In addition, both pre-existing implants and natural teeth were successfully used for connection of AGA. AGA could replace other unsplinted type of attachments. Overdentures using AGA could provide satisfactory result in terms of function, esthetics and retention. However, long term follow up is needed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.423-429
• /
• 2007

The clock recovery module of gap filler for satellite DMB is proposed. Proposed module sustains the output frequency of 10 MHz whether the received signal from the satellite is unstable or cut off within 0.5 sec. The advantages of this module is without frequency tuning at regular interval and low material cost. This module is fabricated by using CPLD as clock recovery IC and new type of loop filter for satisfying the fast lock time and long hold over time simultaneously. The measured performance of the fabricated module has a holdover time of 11 sec at frequency stability less than 0.01 ppm, and phase noise of -113 dBc/Hz at 100 Hz offset.