• 제목/요약/키워드: Long Fiber

검색결과 1,010건 처리시간 0.025초

금속선의 주기적 배열로 유도된 장주기 격자를 이용한 이득 평탄화된 광섬유 증폭기 제작 (Fabrication of an Optical Fiber Amplifier Using Long-period Fiber Gratings Formed by Periodically Arrayed Metal Wire)

  • 손경락;황웅;심준환
    • 한국항해항만학회지
    • /
    • 제31권10호
    • /
    • pp.833-837
    • /
    • 2007
  • 본 연구에서는 이득 평탄화된 어븀첨가 광섬유 증폭기를 제작하였다. 이득 평탄화 필터는 주기적으로 배열된 금속선을 이용하여 유도되는 장주기 광섬유 격자로 구현하였다. 980 nm 펌핑 레이저에 의해 증폭된 자발방출 출력 스펙트럼의 C-밴드 파장 영역에서 이득 리플을 제작된 필터를 적용하여 1 dB 이내로 억제하였다. 다중 채널을 동시에 증폭시킬 수 있는 성능은 페브리 페롯 레이저 다이오드를 이용하여 측정하였고 C-밴드에서 20 dB 이상 증폭시킬 수 있음을 보여주었다. 이 증폭기는 파장분할 다중화 방식의 장거리 광 전송에서 다중 채널을 동시에 증폭하는 효과적인 방법을 제공할 것이다.

기계적으로 구현된 장주기 광섬유 격자 Mach-Zehnder 간섭계 (Mechanically induced Mach-Zehnder interferometers based on long-period fiber grating pair)

  • 장현수;조준용;이경식
    • 한국광학회지
    • /
    • 제14권4호
    • /
    • pp.365-368
    • /
    • 2003
  • 본 논문에서는 장주기 광섬유격자쌍을 이용하여 광섬유 Mach-Zehnder 간섭계(MZI)를 기계적인 방법으로 구현해 보았다. 제작한 간섭계의 장주기 광섬유격자쌍의 투과스펙트럼과 fringe spacing의 이론치과 실험치를 비교, 분석해 보았다. 그 결과, fringe spacing의 값은 이론치와 실험치가 비교적 잘 일치하는 것을 알았다.

기계적으로 유도된 장주기 광섬유격자 소자와 이를 이용한 EDFA 이득평탄화 (Mechanically induced long-period fiber grating devices and EDFA gain flattening)

  • 김륜경;조준용;이경식
    • 한국광학회지
    • /
    • 제14권1호
    • /
    • pp.8-11
    • /
    • 2003
  • 기계적으로 유도된 소자형 장주기 광섬유격자를 처음으로 제작해 보았다. 본 연구의 장주기 광섬유격자 소자는 제작이 용이하며. 다른 광 소자나 시스템에 적용 또는 장착이 가능하다는 장점을 가지고 있다. 또한, 제작된 장주기 광섬유격자 소자는 격자 제작시 중심파장과 투과손실을 가변할 수 있는 특징을 가지고 있다. 장주기 광섬유격자 소자의 제작원리를 살펴보고, 제작된 장주기 광섬유격자의 파장가변 특성과 압력에 따른 투과특성을 실험해 보았으며, 장주기 광섬유격자 소자를 EDFA의 이득 평탄화 실험에 적용해 보았다.

High-Resolution Interrogation Technique for Fiber Bragg crating Sensor Using Long-Period Fiber Grating Pair and Erbium-Doped fiber

  • Jung, Jae-Hoon;Lee, Yong-Wook;Lee, Byoung-Ho
    • Journal of the Optical Society of Korea
    • /
    • 제6권1호
    • /
    • pp.5-12
    • /
    • 2002
  • A novel interrogation scheme to detect fine Bragg wavelength shift using a long period fiber grating pair with erbium-doped fiber inserted between the two gratings is reported. The technique is shown to feature high resolution and much more immunity to temperature perturbation compared to the conventioned Mach-Zehnder interferometer demodulation system. For quasi-static strain measurement, this approach provides high wavelength resolution of 0.05 pm that corresponds to 41.7 ne in strain and $3.8 $\times$ 10^{-3}$$^{\circ}C$ in temperature. This interrogation system is also employed in dynamic measurement to obtain the minimum detectable strain perturbation of ~ 8.76 ne/H $z^{{\frac}{1}{2}}$ at 100 Hz. Moreover, this interrogation system has prominent thermal stability. This thermal stability comes from the fact that two arms of the interferometer, the core and cladding in erbium-doped fiber, are exposed to nearly the same environment .

광섬유 클래딩 모드의 분산 특성 조절에 의한 장주기 격자 내에서의 공명 피크의 free spectral range 향상 (Enhancement of free spectral range in the resonance peaks in a long period fiber grating by controlling clad mode material dispersion)

  • Jeong, Hoon;Oh, K.
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
    • /
    • pp.72-73
    • /
    • 2000
  • Optical fiber gratings have been intensively studied for applications in optical fiber communications and sensor systems due to their all-fiber configuration, low insertion loss, low cost, and high flexibility. Especially, cladding mode coupling fiber devices such as long period gratings (LPG) and acousto-optic tunable filters (AOTF) have been developed as a gain equalization filter in erbium doped fiber amplifier (EDFA) for wavelength division multiplexing (WDM) systems$^{(1-2)}$ . (omitted)

  • PDF

UV 폴링용 Ge와 B가 첨가된 실리카 유리 광섬유 제조 및 특성 평가 (Fabrication and Characterization of Ge/B-doped Optical Fiber for UV Poling Applications)

  • 김복현;안태정;허종;신동욱;한원택
    • 한국세라믹학회지
    • /
    • 제39권12호
    • /
    • pp.1158-1163
    • /
    • 2002
  • 2차 비선형 광특성을 유도하기 위한 UV 폴링용 Ge와 B가 첨가된 광민감성 광섬유를 제조하였다. 248 nm KrF 엑시머 레이저 조사에 의하여 수소처리 없이 장주기 격자를 형성할 수 있었다. 116 mJ/$cm^2$의 펄스 에너지와 10 Hz의 조사 빈도로 1분간 광민감성 광섬유에 레이저를 조사할 경우 -4 dB의 큰 band rejection 특성을 얻을 수 있었다. 제조된 광섬유의 광민감성은 장주기 격자쌍 방법을 이용하여 측정하였으며, 8.67 kJ/$cm^2$의 fluence로 KrF 엑시머 레이저를 조사할 경우 3.3${\times}10^{-3}$의 큰 코어 굴절률 변화를 얻었다. 또한 UV 폴링 시에 광섬유 코어에 고전압을 쉽게 인가할 수 있는 H자 형상의 광섬유를 인출조건의 최적호를 통하여 제조하였다.

Stabilizing circuit of doppler beat signal obtained by coherence-dependent fiber-optic laser doppler velocimeter

  • Shinohara, shigenobu;Michiwaki, Motohiko;Ikeda, Hiroaki;Yoshida, Hirofumi;Sawaki, Toshiko;Sumi, Masao
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
    • /
    • pp.434-439
    • /
    • 1993
  • Described is a stabilizing circuit of the Doppler beat signal obtained by the coherence-dependent fiber-optic laser Doppler velocimeter (LDV), which employs both a self-mixing laser diode (SM-LD) and a 10m-100m long optical fiber. The stabilizing circuit maintains the SM-LD drive current at an optimum value, which gives a maximum Doppler signal during long hours.

  • PDF

조기강도 콘크리트의 내구특성 (Durability Characteristics of High-Early-Strength Concrete)

  • 원종필;김현호;안태송
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.991-996
    • /
    • 2001
  • The long-term durability characteristics of high-early-strength concrete were assessed. The effect of long-term durability characteristics of high-early-strength concrete were investigated. In experiment, two different types of fiber were adopted for improvement of durability. High-early-strength fiber reinforced concretes using regulated-set cements are compared with high-early-strength concrete without fiber. The durability performance of the laboratory-cured high-early-strength concrete specimens was determined by conducting an accelerated chloride permeability, abrasion resistance, freeze-thaw, surface deicer salt scaling and wet-dry repetition test. The results indicated that incorporation of fibers enhance durability performance.

  • PDF

하이브리드 섬유보강 콘크리트의 장기 건조수축 및 내동해성 평가 (Evaluation for Long Term Drying Shrinkage and Resistance to Freezing and Thawing of Hybrid Fiber Reinforced Concrete)

  • 김요셉;배수호;이현진
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제23권2호
    • /
    • pp.60-66
    • /
    • 2019
  • 콘크리트의 낮은 인장강도 및 균열제어 능력 등의 약한 재료성질을 개선하기 위하여 수년간 하이브리드 섬유보강 콘크리트에 관한 많은 연구가 진행되어 왔다. 그러나 비정질 강섬유와 유기섬유를 이용한 하이브리드 섬유보강 콘크리트에 관한 연구는 이루어지지 않은 실정이다. 따라서, 본 연구의 목적은 비정질 강섬유와 유기섬유로서 폴리아미드 섬유를 이용한 하이브리드 섬유보강 콘크리트의 압축강도, 장기 건조수축 및 내동해성을 평가하는 것이다. 이를 위하여 목표 압축강도 40 및 60 MPa 각각에 대해서 하이브리드 섬유 혼입률을 전체 체적비로 1.0%로 설정하여 비정질 강섬유와 폴리아미드 섬유를 이용한 하이브리드 섬유보강 콘크리트를 제작하였다. 제작된 하이브리드 섬유보강 콘크리트의 장기 건조수축 및 내동해성을 평가한 결과, 재령 365일 및 730일에서의 장기 길이변화율은 플레인 콘크리트보다 각각30%, 25% 이상 감소된 것으로 나타났으며, 동결융해 300 사이클 후의 내구성 지수는 90% 이상으로, 내동해성이 있는 것으로 나타났다.