• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.257-263
• /
• 2013

In case of image observation equipments, CCTV for short distance visual field is usually installed and operated mostly as the means of crime-prevention. However, the extensive demand for monitoring problems in case of the increase in intelligent crimes and disasters has led to the necessity of the development of long-distance observation equipments embedded with Night View functions. In case of the Night View equipments, the relevant market is set up to be focused mostly on Thermal Observation Device(hereinafter, TOD), but some shortcomings such as the limitation of image visibility and excessive maintenance cost, etc. have actually caused the necessity of new long distance Night View equipment. Moreover there might follow lots of difficulties in long-distance visualization in the event that irregular reflection is generated by minute particles in the atmosphere such as fog, smog, and dust, etc. These factors are motivate the work presented in this study. Our study is aimed at the realization of Pulsed Laser Illuminator and newly proposed Range-Gated image acquisition technology. And also the implementation of Tracker for continuous trace of the objects of interest from the obtained sequence images.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.3
• /
• pp.51-60
• /
• 2007

The purpose of this study was to kinematically analyze the differences between short(2.17 m) and long(10.94 m) putting stroke motions. Thirteen male professional golfers were participated in this study. Experiment was conducted on the artificial grass mat in the gymnasium. Kinematic data were collected by the 60 Hz Kwon3D motion analysis system. Differences were compared by SPSS paired t-test and one-way ANOVA. Duncan was used for post-hoc test and a=.05. The results were as follows: 1. Ground projected trajectory of the putter head were statistically straight during both short and long putts. 2. There was no consistent alignment tendency among shoulder, hip, and stance alignments. However stance alignment was consistent between short and long putts. Thus it is assumed that professional golfers align their body based on their stance alignment. 3. During putting, shoulder rotated not only up and down but also right and left. 4. Left and right elbow distance was maintained during all phases of the putts for both short and long putts. 5. Inter foot distance of long putting was longer than that of short putting.

• Journal of Digital Convergence
• /
• v.15 no.1
• /
• pp.239-245
• /
• 2017

For privacy protection, we propose a vehicle license plate region detection method in road view image served from portal site. Because vehicle license plate regions in road view images have different feature depending on distance, long distance vehicle license plate regions are not detected by feature of low resolution. Therefore, we suggest a method to detect short distance vehicle license plate regions by edge feature and long distance vehicle license plate regions using MSER feature. And then, we select candidate region of vehicle license plate region from detected region of each method, because the number of the vehicle license plate has a structural feature, we used it to detect the final vehicle license plate region. As the experiment result, we got a recall rate of 93%, precision rate of 75%, and F-Score rate of 80% in various road view images.

• Journal of the Korean Society of Physical Medicine
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2021

PURPOSE: This study compared the body composition according to the sport of short-distance and middle & long-distance athletes to identify the factors that affect the body composition. METHODS: Forty-eight athletes selected as youth national athletes in 2019 participated in the study. The study participants measured the length of the lower extremities, body composition, and anaerobic ability. An independent sample t-test was conducted to compare the body composition according to the event. In addition, the Pearson correlation was performed to identify the factors that influence the body composition. RESULTS: The leg length of the Short and Middle & long-distance athletes were similar (p = .584). On the other hand, there were differences in the body fat percentage (p = .001), lean percentage (p = .001), and BMI (p = .001). In addition, the body fat percentage was correlated with the lean body mass (r = .419) and BMI (r = .447). Furthermore, the lean body mass was correlated with the BMI (r = .849) and the peak power (r = .662) and mean power (r = .686) of the anaerobic capacity. Moreover, the BMI was correlated with the peak power (r = .490) and mean power (r = .543) of the anaerobic capacity. The peak power of the anaerobic ability was correlated with the mean power (r = .931). CONCLUSION: The body composition differed according to the sport. The body fat percentage correlated with the lean body mass and the BMI. The lean body mass correlated with the BMI, peak power of anaerobic ability, and mean power. The BMI correlated with the anaerobic capacity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.94-102
• /
• 2015

The electronic ballast for HID lamps needs to ignite lamps even though the length from the ballast to lamp is far away. Therefore, it needs to do the research on a resonant ignition to turn on the HID lamps because the reduction of ignition voltage is not much depending on the distance. However, the parasitic capacitance is increased depending the length of the cable, and it affects the resonant frequency. The ignitor voltage can be increased drastically under the resonant ignition through frequency sweep, and it is the main reason of blowing up. Therefore, the clamping diode is proposed to suppress the voltage of the primary winding during resonant ignition.

• Explosives and Blasting
• /
• v.16 no.3
• /
• pp.25-34
• /
• 1998

This area is covered in Andesite of high compression strength and located in PUSAN SEO-KU. There are many old houses around shaft site. So, we must have a cautious blasting operation. A total of 40 blasts were test at DAE-SHIN Shaft site to study the magnitude and frequency characterization of blast-induced vibration. The effect of viblating frequency on structual damage and site-specific scaling to define th empirical equations were also discussed. The result can be summarized as follows: 1. Some empirical equations were obtained. $V=K\{{\frac{D}{W}}1/3\}^{-n}$ where the values for n and K are estimated to be -1.407 to -2.202 and 643.3489 to 7283.2104 respectively. 2. Dominant frequencies at short distance are in the range of about 75.0 to 91.8 Hz, with some exceptions of about 50Hz, Frequencies observed at long distance are in the range of 10 to 2Hz. It is apparent the shift of dominant frequency down to lower levels at long distance.

• The Journal of the Korean dental association
• /
• v.11 no.2
• /
• pp.123-129
• /
• 1973

The authors measured orthodontic force using the orthodontic materials of the Rocky Mountain Products Company. The results were as follows : ① Use latex of wide diameter in long distance, and when the latex of wide diameter activated by four or five times, we obtained a optimal force. ② The authors obtained canine retractions with sectional arch. Activation of sectional arch began at 1mm and had to do not activations of 3mm more. ③ The leveling started from .014 green round wire and finished to. 0.16" green Elgiloy round wire. Permit only a mild force in ideal arch form, in rectangular wire. ④ Fundamentaly, elastic thread obtained maximum force by activating as two times. ⑤ Coil spring obtained more heavy force from short distance than long distance.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.107-118
• /
• 2011

This paper performs flow analysis of ultra-high speed vehicle inside the long distance tunnel. One and three dimensional hybrid mesh was used for describing moving motion and flow analysis of an vehicle inside a long distance tunnel which over 20 km. Flow analysis and aerodynamic drag measuring were performed by three dimensional mesh: around vehicle, and pressure waves of a tunnel was measured by one dimensional mesh: the other region where rare changing of flow pattern.

• Journal of the Korean Data and Information Science Society
• /
• v.22 no.1
• /
• pp.9-18
• /
• 2011

After the launch of PCS in 1997, the mobile telephone industry has achieved a remarkable growth in market share and sales, and substituted for long-distance wire communication market. This study investigates the interrelationships between the two markets in transition and attempts to perform the statistical tests if the diffusion of mobile telephone was the direct factor for the reduction in sales of long-distance communication industry. The evidence of the direct substitution effect between the two markets is not likely to be found. Unlike the general expectations, the test result seems to prove the sustained initial complementary relation for awhile.

• Journal of Broadcast Engineering
• /
• v.23 no.5
• /
• pp.693-700
• /
• 2018

In this paper, we propose a wireless video transmission scheme, providing medium and long range communication in the 2.4GHz band with beamforming. With this scheme, it is shown that the transmission rate of 32Mbps and received signal power of -77dBm is achieved with 4 antennas of 5dBi and 16dBm transmit power at each antenna connection for the distance of 3.6km. The scheme also provides transmission distance of 20km for 10~12Mbps with the 4 omni-directional antennas of 5dBi.