• Journal of the Korea Safety Management & Science
• /
• v.14 no.1
• /
• pp.87-93
• /
• 2012

The purpose of this study suggests a personalized algorithm of physical activity energy expenditure prediction through comparison and analysis of individual physical activity. The research for a 3-axial accelerometer sensor has increased the role of physical activity in promoting health and preventing chronic disease has long been established. Estimating algorithm of physical activity energy expenditure was implemented by using a tri-axial accelerometer motion detector of the SVM(Signal Vector Magnitude) of 3-axis(x, y, z). A total of 10 participants(5 males and 5 females aged between 20 and 30 years). The activities protocol consisted of three types on treadmill; participants performed three treadmill activity at three speeds(3, 5, 8 km/h). These activities were repeated four weeks.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.102-105
• /
• 2003

Up to the present studies of the car number recognition system, it is generally known to have serious problems such as relatively long processing time due to the excessive length of data extracted from the number plate based on the current image characteristics, and the image blurring with the physical damage of the brightness and darkness signals of the number plate caused by external impulses with many difficulties in the extraction of the highlighted numbers. In this Paper we used the characteristics firstly having a constant brightness of number plate, and a high density to the horizontal axis, and the influences of highlighted signal could be reduced by making reflections less through the polarized filter on the camera for any highlighted signal. For the more, the data processing time and the noise reduction are effectively implemented by using the wavelet transform of time-space scale with the considerations on the physical loss and processing time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.4
• /
• pp.10-15
• /
• 2010

Cortical bone is composed of an osteon, which is a subunit of the cortical bone. At the center of the osteon, Haversian is located and it consists of blood vessels and nerves. Osteon is known to be inclined 5 to 15 degrees with respect to the long axis of a cortical bone, but the reason why it is inclined is not clear. Using the poroelastic calculation provides the pore pressure varies at the lacunar-canalicular network from -200KPa to 200KPa. This estimation is close to the result shown in the previous literature and it helps further cell culture experiment for elucidating the bone remodeling process.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.102-104
• /
• 2019

Registering different kinds of clinical images widely used in diagnostic and surgery planning. However, cause of tumor growth or effected by gravity, human tissue has plenty of non-rigid deformation with clinically. Non-rigid registration allows the mapping of straight lines to curves. Therefore, such local deformation makes registration more complicated. In this work, we mainly introduce intra-subject, inter-modality registration. This paper mainly studies the nonlinear registration method of 2D medical image registration. The general medical image registration algorithm requires manual intervention, and cost long registration time. In our work to reduce the registration time in rough registration step, the barycenter and the direction of main axis of the image is calculated, which reduces the calculation amount compared with the method of using mutual information.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.4
• /
• pp.214-217
• /
• 1985

Platinum(II) complexes of R-2,2'-diaminobinaphthyl (R-dabn), [Pt(R-dabn)(H2O)2]Cl2, [Pt(R-dabn)(R-Pn)]Cl2, [Pt(R-dabn)(R-bn)]Cl2, and platinum(II) complexes of S-2,2'-diaminobinaphthyl (S-dabn), [Pt(S-dabn)(H2O)2]Cl2, [Pt(S-dabn)(S-Pn)]Cl2, and [(Pt(S-dabn)(S-bn)]Cl2 have been prepared. (R-Pn and S-Pn are, respectively R- and S isomer of 2,3-diaminobutane). R-Pn and S-bn are, respectively R and S isomer of 2,3-diaminopropane). In the vicinity of the B-absorption band region of dabn, the circular dichroism spectra of platinum(Ⅱ) complexes of R-dabn series show a positive B-band followed by a negative higher energy A-band, which is generally understood as the splitting pattern for a ${\lambda}$ conformation, while the circular dichroism spectra of platinum(Ⅱ) complexes of S-dabn series show a negative B-band followed by a positive higher energy A-band in the long-axis polarized absorption region as expected for a $\delta$ conformation.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.4
• /
• pp.335-339
• /
• 1989

Cholesteryl methyl ether$(CH_3OC_{27}H_{45})$ crystallizes in the monoclinic space group $P2_1$with a = 11.740 (8), b = 7.576 (5), c = 15.492 (10)${\AA},\; {\beta}\;= 110.39 (5)^{\circ}$, Z = 2, Dc = 1.03 g/$cm^3$ and Do = 0.96 g/$cm^3$. The intensities were collected on a Nonius CAD-4 diffractometer with Nb-filtered Mo-$K_{\alpha}$ radiation. The structure was solved by direct methods and refined by full matrix least-squares methods. The final R factor was 0.085 for 1479 observed reflections. Compared with other cholesterol derivatives, the cholesteryl ring and tail region of the molecule are normal. The molecular long axes are parallel to the [101] axis and molecules are packed together in a similar way to those in cholesteryl cliloride and bromide.

• Wind and Structures
• /
• v.35 no.2
• /
• pp.93-108
• /
• 2022

Steel tubular towers are commonly used in UHV and long crossing transmission lines. By considering effects of the model scale, the solidity ratio and the ratio of the mean width to the mean height, wind tunnel tests under different wind speeds on twenty tubular steel tower body models and twenty-six tubular steel cross-arm models were completed. Drag coefficients and shielding factors of the experimental tower body models and cross-arm models in wind directional axis for typical skewed angles were obtained. The influence of the lift forces on the skewed wind load factors of tubular steel tower bodies was evaluated. The skewed wind load factors, the wind load distribution factors in transversal and longitudinal direction were calculated for the tubular tower body models and cross-arm models, respectively. Fitting expressions for the skewed wind load factors of tubular steel bodies and cross-arms were determined through nonlinear fitting analysis. Parameters for skewed wind loads determined by wind tunnel tests were compared with the regulations in applicable standards. Suggestions on the drag coefficients, the skewed wind load factors and the wind load distribution factors were proposed for tubular steel transmission towers.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.447-447
• /
• 2023

This study aimed to convert underutilized moso bamboo into high-value added products such as fences, interior materials, lighting fixtures, and accessories. Green moso bamboo poles with a diameter of approximately 10 cm and a length of approximately 3.7 m were heat treated at 140℃ using a large-scale kiln. The processing time was meticulously adjusted through various stages, including pretreatment (6-8 hours at 60℃), cooking (8-10 hours at 100℃), steaming (26-30 hours at 120℃), heating (4-6 hours at 140℃), and finally, cooling (below 80℃). A meticulously designed heat treatment process has enabled efficient mass production of moso bamboo poles with improved qualities, including minimal splitting, moisture levels below 3%, and a specific gravity of 1.05. The focus of this study was to present the physical and drying properties, such as color, dimensional change, specific gravity, moisture content, and splitting, observed during the heat treatment process.

• International journal of advanced smart convergence
• /
• v.13 no.2
• /
• pp.187-194
• /
• 2024

For precise cardiac diagnostics and treatment, we introduce a novel method for patient-specific mapping between myocardial and coronary anatomy, leveraging local variations in myocardial thickness. This complex system integrates and automates multiple sophisticated components, including left ventricle segmentation, myocardium segmentation, long-axis estimation, coronary artery tracking, and advanced geodesic Voronoi distance mapping. It meticulously accounts for variations in myocardial thickness and precisely delineates the boundaries between coronary territories according to the conventional 17-segment myocardial model. Each phase of the system provides a step-by-step approach to automate coronary artery mapping onto the myocardium. This innovative method promises to transform cardiac imaging by offering highly precise, automated, and patient-specific analyses, potentially enhancing the accuracy of diagnoses and the effectiveness of therapeutic interventions for various cardiac conditions.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.379-382
• /
• 2007

The MEMS (Micro Electro Mechanical Systems) process is used in a micro/nano pattern manufacturing method. This method is based on the lithography technology. But the MEMS process has some problems such as complicated process, long processing time and high production costs. Many researchers are doing research in substitute manufacturing method to work out a solution to these problems. In this paper, we apply a dieless incremental forming technology to a substitute method of MEMS process. This dieless forming technology is using in the commercial scale sheet forming such as a prototype of automobile sheet parts. 5-axes CNC (Computerized Numeric Control) method are applied in this system to get a micro-scale dieless forming results. These 5-axes system are composed of precision AC servo motor stages (4-axes) and PZT actuator (1-axis). A PZT actuator is used in a precision actuating axis because it can be operated in the nano scale stroke resolution. This micro dieless incremental forming system has the advantage of minimization in manipulating distance and working space. As equipment and tools become smaller in size, minute inertia force and high natural frequency can be obtained. Therefore, high precision forming performance can be obtained. This allows the factory to quickly provide the customer with goods because the manufacturing system and process are reduced. To construct this micro manufacturing system, many technologies are necessary such as high stiffness frame, high precision actuating part, structural analysis, high precision tools and system control. To achieve the optimal forming quality, the micro dieless forming system is designed and made with high stiffness characteristic.